3SIXT 3S-0225 Jet Pak 7800mAh Rechargeable Power User Guide
- June 17, 2024
- 3SIXT
Table of Contents
USER GUIDE
JetPak 7800mAh Rechargeable Power
3S-0225 Jet Pak 7800mAh Rechargeable Power
-
Fully charge Jet Pak for at least 5 hours through a wall outlet before first use (see step ➋).
-
To recharge Jet Pak
Insert the supplied USB 2.0 cable (micro USB end a ) into Jetpack’s 5V input port b . Insert USB end of cable c into the USB 2.0 port of your wall adaptor, laptop or PC d .
-
To recharge your device
Insert your device’s charging cable (USB 2.0 end c ) into one of Jet Pak’s 5V output ports e . Insert the connector end of your device’s cable f into the charging port of your device g . It may be necessary to press the power button the to start recharging.
To operate flashlight
Double-click h fast to turn flashlight on, double-click h to turn
flashlight off.
Important Safety Information
PLEASE READ BEFORE OPERATION
- Before recharging JetPak through a wall outlet make sure wall outlet voltage is 5V.
- Make sure to use a standard USB 2.0 Charge Cable with the appropriate specifications – other cables may damage your smartphone or tablet.
- Do not drop, knock, dissasemble or attempt to repair JetPak.
- Do not immerse or put JetPak in water and keep JetPak in a dry place.
- Do not expose JetPak to excessive heat including sunlight and fire.
- Do not use JetPak near explosive gases or flammable materials.
- Do not burn or incinerate JetPak.
- Do not expose JetPak to harsh chemicals.
- Keep JetPak away from young children.
- Putting anything in JetPak’s input or output ports, other than a standard USB 2.0 charging cable or your devices charging cable will cause damage or short out JetPak.
- To extend JetPak’s charging life, do a complete recharge on JetPak every four months. 3S-0225
Documents / Resources
|
3SIXT 3S-0225 Jet Pak 7800mAh Rechargeable
Power
[pdf] User Guide
3S-0225 Jet Pak 7800mAh Rechargeable Power, 3S-0225, Jet Pak 7800mAh
Rechargeable Power, Pak 7800mAh Rechargeable Power, Rechargeable Power
---|---