3SIXT 3S-0653 Jetpak Slim 4000mAh Power Bank User Guide
- June 13, 2024
- 3SIXT
Table of Contents
3SIXT 3S-0653 Jetpak Slim 4000mAh Power Bank
OVERVIEW
- Fully charge JetPak for at least 5 hours through a wall outlet before first use (see step
**2**) - To recharge JetPak
Insert the supplied USB 2.0 cable (micro USB end G)) into JetPak’s SV input part © . Insert USB end of cable© into the USB 2.0 port of your wall adaptor, laptop or PC **(d).
**
- To recharge your device
Insert your device’s charging cable (USB 2.0 end (c) into one of JetPak’s 5V output ports (e). Insert the connector end of your device’s cable
into the charging port of your device**9**It may be necessary to press the power button**h**to start recharging.
Indicator Lights
The indicator lights**i**depict the approximate capacity of the JetPak Slim at time of charging/recharging:
1) 25%(NIL)
2) 50%[25] 3) 75%[50] 4) 100%[75
When charging JetPak Slim with a wall charger or PC, the first indicator light (D) will flash to indicate charging. As JetPak Slim continues to charge, the indicator lights [1-4) will slowly turn on and remain solid until all lights are illuminated and solid. Jetpack Slim is now charged and ready to charge your device.
As you charge your device with JetPak Slim, the lights will slowly turn off,
indicating how much capacity is left. You may have to press the power button
**h** to see this as Jetpak’s lights may turn off while charging your
device.
You can check how much capacity JetPak Slim has at anytime by pressing the
power button **h** once and he indicator lights [1-4) will illuminate to
indicate the amount of charge remaining.
Important Safety Information
PLEASE READ BEFORE OPERATION
- Before recharging JetPak through a wall outlet make sure wall outlet voltage is SV.
- Make sure to use a standard USB 2.0 Charge Cable with the appropriate specifications – other cables may damage your smartphone or tablet
- Do not drop, knock disassemble or attempt to repair JetPak
- Do not immerse or put JetPak in water and keep JetPak in a dry place Do not expose JetPak to excessive heat including sunlight and fire
- Do not use JetPak near explosive gases or tlammable materials
- Do not burn or incinerate JetPak
- Do not expose JetPak to harsh chemicals
- Keep JetPak away from jetPak’s children
- Putting anything in JetPak’s input or output ports, other than a standard USB 2.0 charging cable or \d □ ur devices charging cable will cause damage or short out JetPak
- To extend JetPak’s charging life, do a complete recharge on JetPak every four months
Tech Spec
| Capacity | 4000rnAh |
|---|---|
| Batteryt Type | Lithium Polymer |
| Smartphone charges | 2 x 100% full charges* |
| Tab let charges | Not suitable for tablet charging |
| Input | DC5.0±05V/2DDDmAh |
| Output | 1 x DC5.0±0.5V /2100rnAh 1 x DC5.0±0.5V /1000rnAh |
| Recharge time | Up to 4 hours using AC wall outlet |
| Charging C!:JCle | >500 times |
| Protection | Over Current Protection. |
Over Surge Protection, Over Voltage Protection
Material| Aluminium
Dimensions| 120 x 67 x 10mm
Weight| 120g