LOGIC B24W 4G Smart Phone User Guide
- June 17, 2024
- Logic
Table of Contents
LOGIC B24W 4G Smart Phone User Guide
Thank you for purchasing this innovative LOGIC device. The specifications in
this document are subject to change without prior notice.
LOGIC and the LOGIC logo are registered trademarks of Swagtek, Inc. Other
trademarks are the property of their respective owners.
Charge for 24 hours before using.
Install SIM card/ memory card.
Get to know your Logic phone
Connect your Logic phone to the computer using a USB cable (not
included).
Copy music files from your computer to your Logic phone.
FCC Statement
1. This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference
that may two undesired operation
2. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and foU7d to comply with the limits for a Class
B digital device. pursuant to Part 15 of the FCC Rues. These limits are
designed to provide reasonable protection against harmful interference in a
residential This equipment generates uses and can radiate radio frequency
energy and. if not installed and used in accordance with the instructions. may
cause harmful interference to radio . However. there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception. which con be
determined by the equipment off and on. the user is encouraged to try to
cortex the interference by one or more of the following meals.
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
– Consult the dealer or on experienced radio/TV technician for help
SAR Information Statement
YOU” wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
levels of RF energy for the general population. The guidelines are based on
that were developed by independent scientific organizations through periodic
and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to ossl.l'”e the safety
of all persons. regardless of age and health. The exposure standard for
wireless mobile phones employs a unit of measurement known as the Specific
Absorption Rate. or SAR. The SAR limit set by the FCC is 16 W/kg. • Tests for
SAR are conducted with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is determined at the
highest certified power level. the actual SAR level of the phone while
operating can be wail below the maximum value. This is because the phone is
designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the dozer you are to a wireless
base station antenna. the lower the power output. Before a phone model is
available for sale to the public, to must be tested and certified to the FCC
that to does not exceed the limit established by the government adopted
requirement for safe exposure The tests are performed in positions and
locations (e.g .. at the ear and worn on the body) as required by the FCC for
each model. The highest SAR value for this model phone when tested for use at
the ear is 1.02 W/Kg and when worn on the body, as described in this user
guide, is 0.764 W/Kg(Body-worn measurements differ among phone models.
depending upon available accessories and FCC requirements). While there may be
differences between the SAR levels of various phones and at various positions.
they all meet the government safe exposure. The FCC has granted an Equipment
Authorization for this phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR information on this model
phone is on file with the FCC and con be found under the Display Grant section
of http://www.fcc.gov/oet/fccid otter searching on FCC ID 0552403623
Additional information on Absorption Rates (SAR) can be found on the Cellular
Telecommunications Association (CTIA) web-site at http://www.wow-com.com. •
In the United States Canada. the SAR limit for mobile phones used by the
public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard
incorporates a sub-strontium margin of safety to give additional protection
for the public and to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
requirements. a minimum separation distance of 10mm must be maintained between
the user’s body and the handset. including the antenna. Third-party belt-
clips. holsters, and similar accessories used by this device should not
contain any metallic Body-worn accessories that do not meet these requirements
not exposure requirements and should be avoided. Use only the or an approved
antenna.
Warranty Certificate Terms and Conditions
LCX31C warrant’s that their Products will be free from defects in material and world man ship. The warmth period is one 0) year for the products and three (3) months for the accessories which ore part of the original package including the battery. The warranty period begins the dote of purchase by the End-User who shall present on invoice or a purchase receipt when requiring warranty service otherwise the warranty period will begin from the date of manufacture of the product. LCX31C will repair a product without cost to the customer if it presents a manufacturing defect or defect in workmanship daring the warmth period and if the defect red under normal conditions of use in accordance with the instructions and specifications stated in the user’s molo.
For additional information about the terms and conditions of LOGIC’s Limited Warranty or to obtain Warranty service intonation. please visit the support section at: logcmobility.com
logicmobility.com
Made in China
Copyright Swagtek. Inc. 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>