SCANGRIP 03.5815 Rope Light Owner’s Manual
- June 17, 2024
- SCANGRIP
Table of Contents
SCANGRIP 03.5815 Rope Light
go to scangrip.com to register
Inappropriate use of the light rope can cause individual diodes to become unstable or stop glowing. However, this does not affect the overall performance of the product and a long lifespan can be ensured by avoiding violent pulling and hard twisting of the light rope. Do not twist the light strip.
ROPE LIGHT
WARNING
- Always respect applicable legislation for working with electrical equipment to reduce the risk of accidents.
- Avoid looking directly into the beam of light, as this will result in dazzling.
- Do not use the lamp near a naked flame.
- Protect the mains cable from oil, heat and sharp edges.
- Luminaire is only suitable for direct mounting on non-combustible surfaces.
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the lamp shall be destroyed.
- Always unroll the entire light rope before turning it on.
- The flexible luminaire is available as a spare part in case it is damaged. Contact your local dealer or place of purchase to learn more.
- This lamp is compliant with the following directives (EMC and LVD):
- EN 55015
- EN 61547
- EN 61000-3-2
- EN 61000-3-3
- EN 60598-1
- EN 60598-2-21
- EN 62493
- EN 62471
Discarded electrical products must not be disposed of together with household waste. Please use recycling facilities. Ask your local authority or retailer for advice on recycling.
References
Read User Manual Online (PDF format)
Loading......