GEM P-MU-CPT100 Alarm Flash Lamp Siren User Guide
- June 17, 2024
- GEM
Table of Contents
Alarm Flash Lamp Siren
Installation Diagram
Alarm Settings
| Alarm | 1 | 2 | Remark |
|---|---|---|---|
| 1 | ON | ON | Sound Effect 1 |
| 2 | ON | OFF | Sound Effect 2 |
| 3 | OFF | ON | Sound Effect 3 |
| 4 | OFF | OFF | Sound Effect 4 |
To configure the alarm setting, power off the device first before adjusting
the setting. Once this is complete then power on the device again.
*Default Setting: Alarm 4
Specification:
| 1. Power Input: | 12~24VDC (±15%) |
|---|---|
| 2. Flashing Current: | ≤35mA |
| 3. Alarm Current: | ≤30mA |
| 4. Alarm Volume: | 78dB (At 0.5m distance) |
| 5. Sound Effect ： | 4 Options |
| 6. IP Rating: | IP44 |
| 7. Light Colour : | Red/Green/Blue/Yellow |
| 9. Weight: | 90×86 mm |
| 8. Dimension: | 104.3g |
Alarm Settings
| Alarm | 1 | 2 | Remark |
|---|---|---|---|
| 1 | ON | ON | Sound Effect 1 |
| 2 | ON | OFF | Sound Effect 2 |
| 3 | OFF | ON | Sound Effect 3 |
| 4 | OFF | OFF | Sound Effect 4 |
To configure the alarm setting, power off the device first before adjusting
the setting. Once this is complete then power on the device again.
*Default Setting: Alarm 4
Specification:
| 1. Power Input: | 12~24VDC (±15%) |
|---|---|
| 2. Flashing Current: | ≤35mA |
| 3. Alarm Current: | ≤30mA |
| 4. Alarm Volume: | 78dB (At 0.5m distance) |
| 5. Sound Effect ： | 4 Options |
| 6. IP Rating: | IP44 |
| 7. Light Colour : | Red/Green/Blue/Yellow |
| 9. Weight: | 90×86 mm |
| 8. Dimension: | 104.3g |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>