Gem Group 101517 Auden Bamboo Wireless Charger Instruction Manual
- June 5, 2024
- GEM GROUP
Table of Contents
Auden Bamboo Wireless Charger
IC ID: 21530-101517
FCC ID: 2AGR4-10151
Instruction Manua
Overview
Specification
Qi Certified
Input: 5V/2.0A, 9V/2.0A
Output: 5W/7.5W/10W
Charging frequency: 110.3-205 KHz
Transmission Distance: ≤5mm
Efficiency: ≥75%
Product size: Φ100*11mm
Operation
- Plug the power adapter into the wall socket (adapter not included)
- USB-A side connects to the power wall adapter, USB-C side connects to On the wireless charger side, the LED light will illuminate blue which means the unit is ready to charge your device.
- Place your device onto the wireless charger, the LED light will change from blue to green which denotes the device is being charged.
Note: Only the QC2.0/QC3.0 Standard power adapter can support this product’s fast charging. Adapters are not included with the product. Indicating status and protection function
- LED blue light: Standby
- LED green light: Charging
- Blue light flashing: device is not correctly placed on the wireless charger, over-temperature protection, or detects metal on the back of the device
Packing
- Auden Bamboo Wireless Charger
- USB-A to USB-C Type Charging Cable
- User Manual
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is Subject To
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Changes or modifications not explicitly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
candidates radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
ISED Statement
This device complies with Industry Canada’s license-exempt RSS.
Operation is subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with Canadian radiation exposure limits set forth for an uncontrolled environment. During the operation of the device, a distance of 10 cm surrounding the device and 10 cm above the top surface of the device must be respected.