virtufit VFWROWA100i Water Resistance Aqua User Manual

June 17, 2024
virtufit

VFWROWA100i Water Resistance Aqua

Water Resistance Aqua 100i
VFWROWA100i
USER MANUAL
virtufit VFWROWA100i Water Resistance Aqua

|
---|---
https://virtufit.com/recycle| https://virtufit.com/service/montagevideos/

@virtufit_fitness
VirtuFit
www.virtufit.com

TOOLKIT

virtufit VFWROWA100i Water Resistance Aqua - TOOLKIT

# DESCRIPTION QTY # DESCRIPTION QTY
58 Screw M8*15 4 71 Washer OD16ID81.5 14
60 Screw M8*15 10 74 Allen Wrench S5 1
96 Screw M8*15 4 75 Spanner S13-15 1

STEP 01

virtufit VFWROWA100i Water Resistance Aqua - fig1 STEP 02

virtufit VFWROWA100i Water Resistance Aqua - fig2STEP 03

virtufit VFWROWA100i Water Resistance Aqua - fig3STEP 04

STEP 05

virtufit VFWROWA100i Water Resistance Aqua - fig5FIG. A

FIG. B

virtufit VFWROWA100i Water Resistance Aqua - FIG. B

SAFETY INSTRUCTIONS

WARNING
Consult your doctor before you start exercising. This is particularly important for people with health problems. Please read all instructions before using the machine. VirtuFit assumes no responsibility for injury or property damage resulting from the use of this equipment. Please read this manual carefully before assembling and/or using the machine.

  • Make sure that the machine is properly assembled and that allnuts and bolts are tight before using it.
  • Lubricate all moving parts annually with petroleum jelly (acid- free) or silicone spray.
  • Do not wear loose clothing to avoid getting caught in moving parts.
  • Install and use the unit on a solid, level surface.
  • Always wear clean sports shoes when using the appliance.
  • Keep children and pets away from the appliance when in use.
  • Maintain your balance when using the device.
  • Do not place your fingers or other objects in the moving parts.
  • Before exercising, consult your physician to determine the appropriate frequency, duration and intensity of exercise for your age and physical condition. Stop exercising immediately  if you experience nausea, shortness of breath,  fainting, headache, chest pain, tightness or any other discomfort.
  • Do not hold the machine by the seat when moving.
  • This machine should only be used by one person at a time.
  • This machine is designed for domestic use and the maximum user weight is 120 kg.
  • Leave 1-2 metres of space behind the machine to avoid accidents.
  • Place the machine on a clean, flat surface. Do not place it on a thick carpet, as this may hinder the ventilation of the machine.
  • Do not place the machine outdoors or near water.
  • Keep the storage area dry, clean and level to prevent damage.
  • Do not use the device for any purpose other than training.
  • Use the device only in an environment where the ambient temperature is between 10°C and 35°C. Store the device only in an environment where the temperature is between 5°C and 45°C.

GUARANTEE

Warranty claims are excluded if the cause of the defect is the result of:

  • Maintenance and repair work not carried out by an official dealer.
  • Improper use, negligence and/or poor maintenance.
  • Failure to maintain the appliance in accordance with the manufacturer’s instructions.

ASSEMBLY INSTRUCTIONS (STEP 01-05)

Missing parts: If any parts are missing from the packaging, carefully check the polystyrene foam and the appliance itself. Some parts (bolts, screws, etc.) are already attached to the unit.
Error message: Make sure that all cables are carefully attached. The aluminium feet of the console are very sensitive and must be kept straight. If the console gives an error message after the machine has been mounted, the aluminium feet of the console may be bent.
Straightening the aluminium feet may make the error message disappear.
Hex head bolts: Make sure that the hex head spanner is pushed into the bolt before applying force. This will prevent the head of the socket bolt from turning.

ADJUSTING

Level
Adjust the adjustable end caps (27) at the rear of the rear stabiliser (4) by turning the wheel.
NOTE! Fingers can be trapped between moving parts, such as the seat. Keep hands away from the rails (3) when adjusting and using the unit.

Adjusting the pedal
The pedal strap is adjustable and can be adjusted to the size of the user’s foot.

MOVING AND STORAGE
NOTE! Slide the seat to the front of the rails, otherwise the seat will slide when the unit is in the upright position.
Moving
Raise the rear stabiliser (4) until the front stabiliser wheels touch the ground. With the wheels on the ground, the machine can easily be moved to the desired location. cut. Keep

virtufit VFWROWA100i Water Resistance Aqua - Moving

NOTE! The seat slides when the machine is in the upright position.
Storage
CAUTION! Store the tool in a dry place, out of the reach of children.
Make sure that the tool is stable and safe so that it cannot fall on children or animals.
Move the unit to the desired location and lift the rear stabilizer (4) fully up until the rowing machine is vertical. .

virtufit VFWROWA100i Water Resistance Aqua - vertical

NOTE! If the rower is not used for more than one month, empty the water tank first.

FILLING AND EMPTYING THE WATER TANK

CAUTION!

  • Always fill the tank with tap water only and add a water purification tablet. Never use chlorinated water or chlorine.
    This can damage the tank and void the warranty.

  • Add a water purification tablet once every six months. If the water remains cloudy, replace the water in the tank.

  • The water in the tank is not consumable. Discard the water after it has been pumped out of the tank.virtufit VFWROWA100i Water Resistance Aqua - Discard

Fill the water tank (1)

  • Remove the water tank cap (33) from the top water tank (12) opening. The water tank can be filled in two ways.
  • Manual water pump (76): Insert the hose end of the manual water pump (76) into the bucket filled with water and insert the other end of the hose into the water tank opening. Press thehand water pump (76) to fill the water tank.
  • Funnel (77): Insert the funnel (77) into the opening of the water tank and pour a bucket full of water through the funnel into the water tank.
  • Look at the side of the water tank to see what the water level is in the tank.
  • Replace the water tank closing cap (33) on the opening of the water tank (12), so that it is properly closed.

NOTE!

  • You can read the water level on the side of the tank (FIG. A).
    Fill to maximum level 6. The warranty will be voided if the water tank is filled above level 6.

  • The resistance depends on the water level in the tank. Level 1 is the lowest resistance and level 6 is the highest resistance.

Emptying the water tank (2)

  • Remove the water tank cap (33) from the top water tank (12) opening.

  • Place an empty bucket next to the water tank and insert the end of the manual water pump hose (76) into the empty bucket.
    Insert the other end of the hose into the opening of the water tank (12). Squeeze the hand water pump (76) to empty the water tank.

  • When the water tank is empty, dry it with a cloth.

  • Replace the water tank closing cap (33) on the opening of the water tank (12), so that it is properly closed.

TRAINING WITH HEART RATE

Wireless heart rate receiver (5 kHz and Bluetooth)
This VirtuFit fitness equipment is equipped with a wireless heart rate receiver. For the heart rate measurement with a wireless heart rate monitor, use a heart rate monitor that works on Bluetooth and / or a 5 kHz frequency. With a wireless heart rate monitor, it is important that the electrodes are slightly moist and the heart rate monitor fits well on your body. Refer to your heart rate monitor’s user manual for proper instructions. Incorrect use of the heart rate monitor may result in abnormal readings.
NOTE! A wireless heart rate monitor is not included as standard.
Contact your dealer to purchase a wireless heart rate monitor.
WARNING!

  • If you have a pacemaker, it is recommended that you consult your physician before using a wireless heart rate monitor.
  • In rooms with multiple heart rate monitors, it is recommended that you keep enough distance to avoid interference between different devices.
  • Always try to keep the wireless heart rate monitor within a range of 1 meter from the console for optimal reception.
  • Always wear a wireless heart rate monitor directly on the body, under clothing.

TRAINING WITH FITNESS APPLICATIONS
VirtuFit does not provide service for third party fitness applications such as Kinomap, iConsole, FitShow etc. If you encounter problems with a third party fitness application, please contact the developer of the application in question.

Instruction

  • To scan the QR code with an Android or IOS phone or tablet, a QR code scanner is required. The app for scanning QR codes can be downloaded from the App Store or Google Play Store.
  • Scan one of the QR codes below to go directly to the App Store or Google Play Store page where the fitness app can be downloaded.
  • Scan the QR code on the right to access the fitness app manual. The manual describes step by step how to connect the fitness app to the device, how the fitness app works and what its capabilities are.

Fitshow

| |
---|---|---
https://apps.apple.com/nl/app/fitshow/id1387360716| https://play.google.com/store/apps/details?id=com.fitshow &hl=nl&gl=US| https://virtufit.nl/service/fitnessapps/fitshow/

Kinomap

| |
---|---|---
https://apps.apple.com/nl/app/kinomap/id611177969| https://play.google.com/store/apps/details?id=com.kinomap.training &hl=nl&gl=NL| https://virtufit.nl/service/fitnessapps/fitshow/kinomap/

MAINTENANCE

Safe and efficient use can only be achieved if the appliance is properly installed and maintained. It is your responsibility to ensure that the appliance is maintained regularly. Parts that have been used and/or damaged must be replaced before the appliance is used again. The appliance should only be used and stored indoors.
Long-term exposure to weather and temperature/humidity changes can have a serious impact on the electrical components and moving parts of the unit. Always unplug the power cord from the unit before cleaning or servicing it.

Daily maintenance

  • Clean and remove sweat and moisture after each use.
  • Check that the unit is free of dust and dirt.
  • Do not use aggressive cleaning agents and keep the device away from moisture.

Semi-annual maintenance

  • Clean and remove sweat and moisture after each use.
  • Check that the unit is free of dust and dirt.
  • Do not use aggressive cleaning agents and keep the device away from moisture.

CAUTION!

  • All repairs must be performed by a professional technician, unless otherwise specified by the supplier or manufacturer.

Cleaning
General cleaning of the machine will prolong its life. Keep the machine clean by dusting it regularly. Regular maintenance extends the life of your machine and prevents accidents! For more information, please visit https://www.virtufit.nl/service/faq/

CAUTION! Wear clean shoes to reduce the risk of soiling the machine.

Battery
AAA BATTERIES
The display uses AAA batteries, which are replaceable on the back of the display. The batteries must be inserted correctly.

If the screen is unreadable or only parts of the image work, proceed as follows:

  • Remove the batteries and wait 15 seconds.
  • Replace the batteries correctly.

Tips on using the battery

  • Remove the batteries from the screen when they are empty or when the camera will not be used for a long period of time.

  • Do not recharge, disassemble or dispose of batteries in fire.

  • Pay close attention to the + and – when inserting the batteries.
    When replacing batteries, it is recommended to replace all batteries, do not mix old and new batteries.

  • It is recommended to use alkaline batteries, they have a longer life than normal batteries.

  • Batteries should be replaced when the display loses brightness or stops showing.

Battery replacement

  • If the display is not accurate, it is recommended to replace the batteries.
  • Use 2 x AAA batteries for power.

CONSOLE (FIG. A)

  • MODE Confirming setting and/or changing display
  • SET Setting TIME, COUNT, CAL.
  • RESET Press and hold for 3 seconds to reset settings.

Functions

  • SCAN Press “MODE” until “SCAN” is displayed. The console will alternate between the 7 functions: TIME, DISTANCE, CALORIE, COUNT, TOTAL COUNT, RPM, PULSE. Each functions will be hold for 6 seconds.
  • TIME The total training time from the beginning to the end of training will be displayed. Press “MODE” until “TIME” appears to set a training time.
  • RPM Number of strokes per minute, indicating the stroke speed during exercise.
  • COUNT The number of beats during exercise is displayed. Press “MODE” until “COUNT” is displayed to set a target.
  • TOTAL COUNT Total stroke count from beginning to end of workout will be displayed.
  • DISTANCE Total distance from start to finish of workout is displayed.
  • CALORIES Total calories consumed from the beginning to the end of workout is displayed. Press “MODE” until “CAL” is displayed to set a calorie target.
  • PULSE Current heart rate is displayed if detected during exercise.

NOTE!

  • If there is no movement for more than 4 minutes, the console will automatically shut down.
  • When paired with an app, the console does not go into sleep mode automatically.

TRAINING GUIDELINES (FIG. B, 1-5)

A successful training program includes a warm-up, the actual training and a cool-down. Perform the complete training program at least twice, but preferably three times a week and keep a rest day between training sessions. After a few months, the intensity of the training can be increased, for example to four or five times a week.
The warm-up
The purpose of a warm-up is to prepare the body for training and to reduce the risk of injury. Warm up your body for two to five minutes before starting a cardio or strength training session. Do exercises that increase the heart rate and warm up the working muscles. Examples of this type of activity are running, jogging, jumping jacks, skipping and running in place.
Stretching
Stretching while the muscles are warm is very important after a good warm-up and cool-down. It reduces the risk of injury. Stretching exercises should be held for 15-30 seconds. Here are some examples of stretching exercises:

  • Toe touch (Fig. B-1)
  • Inner thight stretch (Fig. B-2)
  • Hamstring stretch (Fig. B-3)
  • Achilles stretch (Fig. B-4)
  • Side stretch (Fig. B-5)

Cooling down
The purpose of the cool-down is to return the body to its (near) normal resting position at the end of the workout. A good cool-down slowly reduces your heart rate and promotes recovery.

EXPLODED DRAWING

virtufit VFWROWA100i Water Resistance Aqua - EXPLODED
DRAWING

PARTS LIST

# DESCRIPTION QTY.
1 Main Frame 1
2 Front Stabilizer 1
3 Slide Rail 1
4 Rear Stabilizer 1
5 connection supprt 1
6 Monitor Support Plate 1
7 Tank plate 1
8 Connecting Plate 1
9 Handlebar 1
10L/R Seat Carriage L/R 2
11 console Rotation Set 1
12 Upper Tank Cover 1
13 Lower Tank Cover 1
14 Mesh Belt Disc 1
15 Mesh Belt Wheel 11511034.5 1
16 Screw M87020 S5 2
17 Handlebar Seat 1
18 Roller 3
19 Spacer 3
20 Mesh Belt Wheel 3
21 Volute Spring  t0.5225080 1
22 screw ST4.2*16 4
23 Pedal fixed mount 2
24 Pedal 2
25 screw M840S5 2
26 moving wheel Φ408.522 2
27 Adjustable End Cap 2
28 Washer Φ208.2H5 4
29 end cap 2
30 Rubber Sealing Ring 1
31 Rubber Sealing Ring 1
32 Bearing 61905 1
33 Fill Plug 1
34 O-shaped Ring 1
35 screw  M8*125 1
36 seat 1
37 Pedal Strap 2
38 belt 1
39 screw   M64015*S5 5
40 Bearing 6000 6
41 One-way Bearing 1
42 screw  ST3.516Φ8 1
43 Bearing 6000 6
44 Alloy Wrap 6
45 Bearing 69004 3
46 Monitor 1
47 Sensor 2
48 Sensor holder 1
49 Magnet  Ø10*5 1
50 Casing Pipe Ø10Ø6.240 3
51 Nylon Lock Nut M6H6S10 10
52 Wave Washer d10Φ150.3 3
53 Raw Cotton Φ96.9Φ6020 1
54 Axle for Volute Spring 1
55 Screw  M6*15 6
56 Nylon Lock Nut M8 9
57 Stainless Steel Axle Φ20163M8 1
58  Screw M8*15 8
59 Washer d8Φ161.5 1
60  Screw M8*15 18
61  Screw M3*20 12
62 Nylon Lock Nut  M3 12
63 Screw  M8*65 1
64 Screw M5*12 2
65 Stopper Φ20*20 1
66  plate for axle  OD40ID200.5 1
67 corss screw M6*10 2
68 Adjustable footpad Φ43*41ΦM8 2
69 Washer d8Φ241.5 1
70 Handlebar cover 2
71 Washer OD16ID81.5 30
72 Screw ST4.2*16 3
73 Silicone Pad 1
74 Allen Wrench  S5 1
75 Spanner S13-S15 1
76 Pumping Siphon 1
77 Funnel 1
78 Lower Tank Plate 1
79 Spacer sleeve Φ32Φ815/PP 2
80 Screw M8*25 1
81 C Clip  d10 6
82 Stainless Washer M3 24
83 Cross Screw M6*15 4
84 Sealing Ring 1
85 Spacer Φ25Φ20.210 1
86 Bolt M65515*S10 3
87 Long Sealing Plate 747333120 1
88 Foot Pad Φ5240M10 1
89 Adjusting U Seat 3091.5 2
90 Adjusting Screw M640Φ10*2.5 2
91 Screw  M825S6 1
92 outer plate for spring Φ112*0.5 1
93 Screw M4*8 8
94 Screw M5*12 8
95 Spacer  Φ16Φ815/PP 2
96 Screw M8*15 4
97 Protect cover 1
98 Impeller 1
99 Sensor wire 2
100 Csrew M8*120, 2
101 Screw M8*60 1

VIRTUFIT
Twekkelerweg 263
7553 LZ Hengelo
The Netherlands
info@virtufit.nl

VIRTUFIT SERVICE

Do you have a problem with your Virtu Fit fitness equipment and would you like to submit a service request? Then scan the QR code on the right and fill in our service form.

virtufit VFWROWA100i Water Resistance Aqua - qr code10 https://www.virtufit.nl/service/service- formulier/

Documents / Resources

| virtufit VFWROWA100i Water Resistance Aqua [pdf] User Manual
VFWROWA100i Water Resistance Aqua, VFWROWA100i, Water Resistance Aqua, Resistance Aqua, Aqua
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals