virtufit VF06052 Supboard Ocean 305 Board User Manual
- October 30, 2023
- virtufit
Table of Contents
virtufit VF06052 Supboard Ocean 305 Board
Product Information
Supboard Ocean 305 & Supboard Cruiser 305
The Supboard Ocean 305 and Supboard Cruiser 305 are high-quality inflatable
stand-up paddleboards designed for recreational use. These boards are made of
high-pressure double-wall drop stitch material that can withstand a maximum
pressure of 1 bar or 15 psi. The board is fully wrapped with a second layer of
material on top and bottom for added durability. The non-slip EVA foam surface
provides excellent grip, while the high-pressure gauge and pump handle make
inflation easy. The board also features D-rings for securing a leash or cargo,
an elastic rope, fins/skeg for tracking, a backpack for easy transport, a
repairing kit, and a paddle.
Product Usage Instructions
Assembly Instructions
Before assembling the Supboard Ocean 305 or Supboard Cruiser 305, check the
packaging and the item carefully to ensure that all parts are included. Some
parts may already be attached to the board. Follow the assembly instructions
carefully.
Inflation
Prior to inflating the board, make sure that the valve is properly
tightened. Use the high-pressure gauge and pump handle to inflate the board to
the required pressure, which is a maximum of 1 bar or 15 psi.
Storage
To ensure the longevity of your Supboard Ocean 305 or Supboard Cruiser 305,
store it in a dry and clean room. Before storing the board, make sure that it
is completely dry and free of sand or gravel. This can cause wear and tear or
even leakage of the board during storage.
Repairing a Leak
If you encounter a leak in your Supboard Ocean 305 or Supboard Cruiser 305,
perform all repairs in a well-ventilated area to avoid inhalation of toxic
fumes and contact with skin or eyes. Keep all repair materials out of reach of
children. Use the repairing kit included with the board to patch the leak.
Make sure that the edges of the repair patch are well compressed so that the
leak is properly sealed.
Paddle Position
The paddle of the Supboard Ocean 305 and Supboard Cruiser 305 can be
extended. Adjust the paddle to your desired length for optimal paddling
performance.
Safety Instructions
Before using the Supboard Ocean 305 or Supboard Cruiser 305, consult your
doctor if you have any health problems. Read all instructions carefully before
using the board. VirtuFit assumes no responsibility for injury or property
damage resulting from the use of this equipment.
@virtufit_fitness
VirtuFit
www.virtufit.com
TOOLKIT
SAFETY INSTRUCTIONS
(FIG. 02)
WARNING!
Consult your doctor before starting to exercise. This is especially important
for people with health problems. Read all instructions before using the
machine. VirtuFit assumes no responsibility for injury or property damage
resulting from the use of this equipment. Please read this manual carefully
before assembling and/or using the machine
- Wear a life jacket.
- Use by minors (under 14 years) under adult supervision.
- Check the air pressure before use.
- Do not use a high-pressure pump, as this may cause cracks.
- Do not fill the item beyond what is indicated in the manual.
- Do not inflate with hot air.
- Do not use the item in rapids and large waves.
- Do not use the product in water from the shore.
- Make sure you are no more than 150 m from the water’s edge.
- Do not use the product in strong winds or out of sight of the shore.
- Make sure you keep your balance when using the product.
- The maximum user weight is 180 kg.
- Read the manual before use.
GUARANTEE
The warranty period for this product is 2 years from the date of purchase. The warranty is only valid when this item is used for normal recreational use and activities and does not cover items used for rental.
Warranty claims are excluded if the cause of the defect is due to:
- If an item or part is found to be defective by VirtuFit, the warranty covers the repair or replacement of the defective item or part only. VirtuFit is not responsible for any costs, losses or damages incurred as a result of the loss or use of this product.
- This warranty does not cover damage caused by misuse, abuse, neglect, normal wear and tear, damage caused by excessive heat exposure, damage caused by improper handling and storage, damage caused by use in waves or breakage on shore, defective supboards caused by falls or accidents in surfing conditions, and damage caused by anything other than defects in material and workmanship.
- This item must not be modified and/or fitted with a motor. –
- This item must not be used in excess of the maximum recommended weight for the user.
- This warranty is void if any unauthorized repair, alteration or modification has been made to any part of the supboard.
- The warranty for repaired or replacement parts is valid from the date of original purchase.
- In case of improper use, negligence and/or lack of maintenance.
- Failure to maintain the item in accordance with the manufacturer’s instructions.
ASSEMBLY INSTRUCTIONS
Missing parts: If any parts are missing from the packaging, please check the packaging and the item carefully. Some parts are already attached to the item.
- Lay the supboard flat on the ground and attach the fins to the supboard.
INFLATION
- Unscrew the valve cap.
- Press the knob and turn it about 90 degrees so that it is in the “OUT” position.
- Place the air pump nozzle on the valve and inflate until you reach the required pressure (maximum 1 bar/15 PSI).
- After inflation, tighten the valve cap (clockwise). Make sure that the valve cap is properly tightened, otherwise the valve will not be completely sealed.
CAUTION!
- The maximum pressure allowed is 1 bar (15 PSI).
- The supboard is only completely sealed if the valve cap is properly tightened.
STORAGE
CAUTION! Store the supboard in a dry and clean room. Make sure that the board is completely dry before storing it and that no sand or gravel remains on the board or between the cracks. This can cause wear and tear or even leakage of the supboard during storage.
- Unscrew the valve cap and deflate the supboard.
- Clean and check the supboard and all accessories.
- When the supboard is empty, roll it up from the other end until all the air is out.
- Make sure the board is completely dry before storing it.
PADDLE POSITION
NOTE! The paddle can be extended
REPAIRING A LEAK
NOTE! Perform all repairs in a well ventilated area. Avoid inhalation of toxic fumes and contact with skin or eyes. Keep all repair materials out of reach of children.
- Lay the supboard flat on the ground and check if the board has completely deflated.
- Prepare a round repair patch with a diameter of at least 7 centimetres.
- Clean the repair patch and the area around the leak with alcohol.
- Tape the area around the leak with masking tape to catch the excess adhesive.
- Apply 3 thin, even coats of repair adhesive to the leak area and the repair patch. Wait 5 minutes between each coat.
- After the third coat, wait 10 to 15 minutes before applying the repair adhesive.
- Use a hand roller to apply the repair adhesive evenly.
- Wait 24 hours before inflating the supboard.
NOTE! Make sure that the edges of the repair patch are well compressed so that the leak is properly sealed.
COMPANY INFORMATION
For an ongoing service request or to purchase parts, please visit;
service@virtufit.nl. Always state the service
number (ITS number) with a question about the current application for a quick
and efficient settlement. A service request must always be submitted via the
service form. So the request not to request service via info@virtufit.nl. Do
you have a problem with your VirtuFit fitness equipment and would you like to
submit a service request? Then scan the QR code on the right and fill in our
service form
VIRTUFIT
Twekkelerweg 263
7553 LZ Hengelo
The Netherlands
info@virtufit.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>