Lightspeed LSCMT Flexmike Pendant Microphone User Manual
- June 17, 2024
- lightspeed
Table of Contents
Lightspeed LSCMT Flexmike Pendant Microphone
Safety Warnings and Certifications
CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN
- USE A LIGHTSPEED SUPPLIED BATTERY ONLY
- CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- Battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- Wall mount using #8 screws with a minimum head diameter of 0.3 inches, in all four mounting holes.
The lightning flash with arrowhead symbol inside an equilateral triangle is
intended to alert the user to the presence of non insulated “hazardous
voltage” within the product’s enclosure, which may be of sufficient magnitude
to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instruction in the literature accompanying this product.
CERTIFICATIONS
- This product is listed to UL standards and requirements for electrical safety by Underwriters Laboratories Inc.
- This product conforms with the essential requirements of the following European Union Directives: 2004/108/ EC Electromagnetic Compatibility (EMC) and 2006/95/ EC Low Voltage Directive (LVD).
- Lightspeed Technologies launched a formal product recycling program in Europe that complies with the European Union Directive 2002/96/EC on Waste Electrical and Electronic Equipment (“WEEE Directive”). Please visit www.lightspeed-tek.com for more information.
- This product is manufactured using lead-free processes and is free of other materials harmful to the environment. It conforms to the most stringent new European guidelines for consumer products (RoHS).
FCC Statements
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Lightspeed Technologies is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm (8″) between the radiator & your body
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s). This Class B digital apparatus complies with Canadian ICES-003 and CAN ICES-3(B)/NMB-3(B). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The IC number for this device is 1732B-LSC25. This includes accessories such as the Clearmike (IC 1732B-LSCMT), Sharemike (IC 1732B-LSSMN) and Media Connector (IC 1732B-LSMCN). This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiation source and your body.
RF RADIATION EXPOSURE STATEMENT
Your microphone is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves (radio frequency electromagnetic fields) recommended by international guidelines. The guidelines were developed by Health Canada and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
EU Declaration of Conformity
According to EU Directives EMC 2014/30/EU, LVD 2014/35/EU, RED 2014/53/EU, RoHS 2011/65/EU
- Manufacturer: Lightspeed Technologies, Inc.
- Address:
- 11509 SW Herman Rd. Tualatin, Oregon 97062
We herewith declare that the following systems comply with the appropriate basic safety and health requirements of the Directive based on its design and type, as brought into circulation by us. In case of alteration of the system, not agreed upon by us, this declaration will lose its validity.
- Products: Redcat, Topcat, 975, Access Link, Flexmike, Sharemike, Pod, Activate Station, Media Connector, Mobile PA
- Model Numbers: RCN, TCN, 975, ALN, FMN, SMN, POD, ACT, MCN, MPA
As applicable, products conform to the standards listed below:
- EN 62368-1:2014
- TEC 62133:2012
- EN 50385:2017
- EN 50566:2017
- EN 50663:2017
- EN 62479:2010
- ETSI EN 301 406 V2.2.2 (2016-09)
- ETSI EN 301 489-1 V2.2.3 (2019-11)
- ETSI EN 301 489-6 V2.2.1 (2019-04)
- ENTEC 63000:2018
The Technical Construction File is available to proper authorities and the product is CE marked.
System Components
System Specifications
Dedicated to Access for All
We strive to make a remarkable difference for teachers and students by creating Access to powerful in-the-moment insights to the learning process. Our audio and video solutions improve student engagement, enable teachers to activate small groups, and encourage collaboration.
- 11509 SW Herman Road
- Tualatin, Oregon 97062
- Toll Free: 800.732.8999
- Phone: 503.684.5538
- Fax: 503.684.3197
- lightspeed-tek.com