Air King DH55 Rotary Dial Dehumidistat Control Instruction Manual
- June 17, 2024
- Air King
Table of Contents
Air King DH55 Rotary Dial Dehumidistat Control Instruction Manual
- Read all instructions before installing or using switch.
- Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.
- Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-related construction.
- When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
- This unit must be grounded.
NOTICE: This device is intended to be used in conjunction with an Air King exhaust fan that clears the air of excessive moisture as may occur after showering. This device CAN NOT reduce relative humidity below the level of the main living space.
Electrical rating: Voltage- 120V AC Full load: 10A Using humidity range: 10% – 80% RH Operating ambient temperature 10 40 ° C
INSTALLATION INSTRUCTIONS
CAUTION: INSTALLATION BY A LICENSED ELECTRICIAN IS RECOMMENDED. INSTALLATION AND USE OF THIS EQUIPMENT SHOULD BE IN ACCORDANCE WITH PROVISIONS OF THE NATIONAL ELECTRICAL CODE, APPLICABLE LOCAL CODES AND PERTINENT INDUSTRY STANDARDS.
CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.
-
Unpack DE humidistat from the carton and confirm that all pieces are present. You should have:
1 – Switch Cover with Switch
1 – Switch Plate
1 – Knob
1 – Bag Containing:
2 – Gang Box Mounting Screws
1 – Instruction/Safety Sheet
NOTE: This unit is designed to fit over a single gang box. -
Determine dehumidistat location. This control should be mounted on an inside wall where normal air circulation can surround the control.
-
Remove cover from back plate.
SAVE THESE INSTRUCTIONS
WIRING
CAUTION: ALL ELECTRICAL CONNECTIONS MUST BE MADE IN ACCORDANCE WITH LOCAL
CODES, ORDINANCES, OR NATIONAL ELECTRICAL CODE. IF YOU ARE UNFAMILIAR WITH
METHODS OF INSTALLING ELECTRICAL WIRING, SECURE THE SERVICES OF A QUALIFIED
ELECTRICIAN.
3a. Dehumidistat Only: For installations where the fan is to be controlled
from the dehumidistat only. Connect the Black lead from the dehumidistat to
the Hot (Black) wire from the power supply. Connect the Red lead from the
dehumidistat to the Black wire from the fan. Connect the ground wire (green or
bare copper) from the house to the Green screw of the mounting plate. Use
approved methods for all connections (Figure 1).
3b. Dehumidistat with manual On switch: For installations where a switch (not
included) to manually turn the fan on is preferred or required, run two Hot
(Black) wires from the power source. Connect one Hot (Black) wire to the black
lead of the dehumidistat. Connect the other Hot (Black) wire from the power
source to the on switch. Connect the Red lead from the dehumidistat to the
Black wire from the fan. Run a Black wire from the on switch to the Black wire
of the fan (both the Black wire from the dehumidistat and the Black wire from
the on switch will be connected to the Black wire from the fan). Connect the
ground wire (green or bare copper) from the house to the Green screw of the
mounting plate. Use approved methods for all connections (Figure 2).
Neutral (White)
4. Mount back plate securely to gang box with screws provided in the parts
package.
NOTE: Make sure the back plate is flat without any undue stress.
5. Re-install front cover by aligning the two holes on the top of the cover
with the two posts on the plate. Secure with cover screw supplied in parts
pack (Figure 3).
6. Turn power on at circuit breaker or fuse panel.
OPERATING INSTRUCTIONS
Using the adjustment knob, turn the dehumidistat down to its lowest setting,
then to the highest setting. Cycle at least 3 times to assure proper system
function. Return control knob pointer to desired setting.
DEHUMIDISTAT: The dehumidistat is designed to automatically power the fan when
the humidity level rises above the chosen level. If the fan is not operating,
adjust the humidity setting on the dehumidistat to a lower setting. Once the
desired humidity level is reached, the fan will automatically turn off.
MANUAL ON SWITCH: An optional manual on switch allows the user to power the
fan no matter what the humidity level is. When the switch is turned on, the
fan will turn on. This is especially useful for odor control in bathrooms.
NOTE: Either the dehumidistat OR the on switch can power the fan. To turn the
fan off, both the dehumidistat and the manual on switch must be off.
CAUTION: NEVER USE THE DEHUMIDISTAT SWITCH AS A MEANS TO TURN OFF THE POWER TO THE FAN WHEN SERVICING. ALWAYS TURN THE POWER OFF AT THE CIRCUIT BREAKER OR FUSE PANEL.
CALIFORNIA RESIDENTS ONLY:
⚠ WARNING: THIS PRODUCT CAN EXPOSE YOU TO A CHEMICAL [OR CHEMICALS] KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE CANCER.
⚠ WARNING: THIS PRODUCT CAN EXPOSE YOU TO A CHEMICAL [OR CHEMICALS] KNOWN TO
THE STATE OF CALIFORNIA TO CAUSE REPRODUCTIVE TOXICITY.
LIMITED WARRANTY
WHAT THIS WARRANTY COVERS: This product is warranted against defects in workmanship and/or materials. HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs. WHAT AIR KING WILL DO: During the warranty period, Air King will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model. WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized repairs made or attempted. This warranty does not cover shipping costs for the return of products to Air King for repair or replacement. Air King will pay return shipping charges from Air King following warranty repairs or replacement ANY AND ALL WARRANTIES, EXPRESSED OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY), LAST ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE OR UNTIL THE ORIGINAL PURCHASER OF THE PRODUCT SELLS OR TRANSFERS THE PRODUCT, WHICHEVER FIRST OCCURS AND IN NO EVENT SHALL AIR KING’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY INCLUDE (I) INCIDENTAL OR CONSEQUENTIAL DAMAGES FROM ANY CAUSE WHATSOEVER, OR (II) REPLACEMENT OR REPAIR OF ANY HOUSE FUSES, CIRCUIT BREAKERS OR RECEPTACLES. NOTWITHSTANDING ANYTHING TO THE CONTRARY, IN NO EVENT SHALL AIR KING’S LIABILITY UNDER ANY EXPRESS OR IMPLIED WARRANTY EXCEED THE PURCHASE PRICE OF THE PRODUCT AND ANY SUCH LIABILITY SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD. Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state to state and province to province. Proof of purchase is required before a warranty claim will be accepted.
CUSTOMER SERVICE:
Toll-Free 800-465-7300 Our Customer
Service team is available to assist you with product questions, service center
locations, and replacement parts. They can be reached Monday through Friday,
8am-4pm Eastern.
Please have your model number available, as well as the type and style
(located on the label inside of your product). Please do not return product to
place of purchase. www.airkinglimited.com
PARTS FOR DISCONTINUED, OBSOLETE AND CERTAIN OTHER PRODUCTS MAY NOT BE
AVAILABLE. DUE TO SAFETY REASONS, MANY ELECTRONIC COMPONENTS AND MOST HEATER
COMPONENTS ARE NOT AVAILABLE TO CONSUMERS FOR INSTALLATION OR REPLACEMENT.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>