Nilight 2004 Third Tail High Brake Light Instructions
- June 17, 2024
- Nilight
Table of Contents
Nilight 2004 Third Tail High Brake Light
Product Information
Specifications
- Product Name: Third Brake Light
- Compatibility: Car models with factory third brake light
- Bulb Type: Halogen
- Number of Bulbs: 3
- Video Tutorial: Installation Video
Product Usage Instructions
Step 1: Removing the Factory Third Brake Light
- Ensure that your car is turned off and the keys are removed from the ignition.
- Locate the factory’s third brake light on your car.
- Using a screwdriver or the appropriate tool, remove the factory screws that secure the third brake light to your vehicle.
- Gently pull out the factory’s third brake light from its position.
Step 2: Removing the Halogen Bulbs
- Identify the three halogen bulbs attached to the factory’s third brake light.
- With a firm grip, carefully pull out each of the three halogen bulbs from their sockets.
- Disconnect the three halogen bulbs from their plugs by gently pulling them apart.
Step 3: Installing the New Third Brake Light
- Take the new third brake light and align it with the socket where the halogen bulbs were previously installed.
- Gently push the new third brake light into the socket until it is securely in place.
- Ensure that the new third brake light is properly aligned with the screw holes on your vehicle.
- Using the factory screws that were removed earlier, fasten the new third brake light to your vehicle.
If you encounter any difficulties during the installation process, we recommend watching our installation video for visual guidance.
Frequently Asked Questions (FAQ)
-
Q: Is this third brake light compatible with all car models?
A: No, this third brake light is only compatible with car models that have a factory third brake light. -
Q: Can I use LED bulbs instead of halogen bulbs?
A: No, this product is designed to work with halogen bulbs and using LED bulbs may cause compatibility issues. -
Q: Can I install the third brake light myself or do I need professional assistance?
A: The installation process can be done by yourself following the provided instructions. However, if you are unsure or uncomfortable with the installation, we recommend seeking professional assistance.
Installation
- Remove the Factory Third Brake Light from Your Car
- Pull out the three halogen bulbs from the factory 3rd brake light
- Remove the three halogen bulbs from the plugs
- Plug our third brake light into where the halogen bulb was removed
Finally, install the new 3rd brake light back into your vehicle with the factory screws
If still have difficulties installing it, please watch this video:
https://www.youtube.com/watch?v=V43CdrR_iaI.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>