Shenzhen Hangshi Technology HB323 Wireless Keyboard User Manual
- June 6, 2024
- Shenzhen Hangshi Technology
Table of Contents
Wireless Keyboard
User manual
Model:HB323
Package Contents
- 1 x Wireless Keyboard
- 1 x Charging Cable
- 1 x User Manual
Charging
- Use the included USB cable for charging. Connect one end to a USB charger, and the other to the keyboard.
- In charging, the power indicator will turn red. Generally, it takes approximately 2 hours for a full charge. (charger is not included)
Specifications
| Bluetooth Specification | Bluetooth 5.1 |
|---|---|
| Operating Range | Up to 33 feet or 10 meters |
| Modulation System | GFSK |
| Standby time | 90 days |
| Charging time | 2 hours |
| Uninterrupted Work Time | 90 hours |
| Battery Type: | Lithium polymer, Non-accessible |
| Battery Capacity | 250 mAh |
| Battery Life | 3 years |
| Key Life | 3 million clicks |
Keyboard Shortcuts
| Home| | Brightness down
---|---|---|---
| Brightness up| | Switch APP
| Back| | Previous track
| Play/pause| | Next track
| Mute| | Volume –
| Volume +| | Screen shot
| Lock screen| Fn+| Keyboard display
Fn+| Battery power display| |
Sleep Mode
The keyboard will enter sleep mode after remaining idle for 30 minutes.
To activate the keyboard, press any key and wait 3 seconds.
Pairing Instructions
Step 1. Turn on the keyboard’s power switch. The status indicator will light
up for 2 seconds.
Step 2. Press the Connect button. The status indicator will start blinking.
The keyboard is now ready to connect to your device.
Step 3. Activate the Bluetooth function on your tablet ( Some tablets have a
‘scan’ button that you need to tap).
Step 4. Locate and select ‘Bluetooth 3.0 Keyboard’ in your Bluetooth menu. The
status indicator light will stop blinking to indicate a successful connection.
NOTE:
- For Android devices, please make sure that your device supports the Bluetooth HID profile or the pairing will not work.
- In case of connect failure, please delete the pairing the record from your device, and try the above procedures again.
Caution
When not in use for a prolonged period, it is recommended that you turn off the keyboard to lengthen the battery life.
Safety Tips
- Do not place heavy objects on the keyboard
- Do not dissemble the product
- Keep the product away from oils, chemicals, and organic liquids
- Clean the keyboard wet cloth
- Dispose of battery according to local laws
- Keep away from sharp objects
FCC Regulatory Compliance
changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>