BARCO R9842060 TLD HB 1.6 Zoom Projector Lens Camera Instruction Manual
- June 17, 2024
- BARCO
Table of Contents
BARCPROJECTION
TLD HB (1.6-2.0:1) LENS KIT
R9842060
INSTALLATION MANUAL
14102003
R5976663/00
Changes
Barco provides this manual ’as is’ without warranty of any kind, either
expressed or implied, including but not limited to the implied warranties or
merchantability and fitness for a particular purpose. Barco may make
improvements and/or changes to the product(s) and/or the program(s) described
in this publication at any time without notice.
This publication could contain technical inaccuracies or typographical errors.
Changes are periodically made to the information in this publication; these
changes are incorporated in new editions of this publication.
Copyright ©
All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of BARCO.
Trademarks
Brand and product names mentioned in this manual may be trademarks, registered
trademarks or copyrights of their respective holders.
All brand and product names mentioned in this manual serve as comments or
examples and are not to be understood as advertising for the products or their
manufactures.
TLD HB (1.6-2.0:1) LENS KIT
1.1 Kit Contents
Kit Contents
Contents
- TLD HB (1.6-2.0:1) Lens.
- Installation Manual.
- Toraysee TM Cloth.
1.2 Removing the installed lens
What has to be done?
Removing the installed lens on the SLM series projector.
Necessary Tools
No tools necessary.
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
How to remove the installed lens?
To remove the lens, follow the next procedure:
- Support the lens with one hand. (image 1-1)
- Move the handle of the lens anchor system to the left. (image 1-2)
- Take the lens unit out of the lens block. (image 1-3) Image 1-1
Support the lens with one hand Image 1-2
Move the handle of the lens anchor system to the left
Image 1-3
Take the lens out of the lens block
1.3 Installing the new lens
What has to be done?
This new lens has to be installed on the SLM series projector.
Necessary Tools
No tools necessary.
Risk of personal injury. Instructions for lens installation must be followed thoroughly.
How to install the new lens?
To install the lens, follow the next procedure:
- Take the lens assembly out of its packing material and remove the lens caps on both sides.
- Move the handle (A) of the lens anchor system to the right. (image 1-4)
- Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector on the lens block (B), until the lens clicks in the lens anchor system.
Caution: For a table mounted projector, hold the projector when pushing the lens into the lens block to avoid sliding off from the table.
Image 1-4
Lens installation
1.4 Quick Lens Adjustment
Quick zoom/focus adjustment
-
Press the Selection key *, Barco key.
The zoom/focus menu will be displayed. (image1-5) -
Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image.
-
When finished, press EXIT key to return or ENTER to continue to the shift adjustment.
Quick shift adjustment
-
Press the Selection key *, Barco key.
The zoom/focus menu will be displayed (image 1-5). -
Press ENTER.
The shift menu will be displayed. (image 1-6) -
Push the cursor key ↑ or ↓ to shift the image up or down and ← or → to shift the image left or right.
-
When finished, press EXIT key to return or ENTER to continue to zoom/focus.
1.5 Lens Formulas
Lens Formulas
To calculate the distance between the projector frontside and the screen (PD) for a given screenwidth (SW), use the following formula: Metric formulas (PD and SW in meter)
Barco Projector SLM Graphics (G) series| Barco Projector SLM Reality (R)
series
---|---
PDmin=1.62xSW-0.09| PDmin=1.59xSW-0.09
PDmax=2.03xSW-0.13| PDmax=2.00xSW-0.13
Inch formulas (PD and SW in inch)
Barco Projector SLM Graphics (G) series| Barco Projector SLM Reality (R)
series
---|---
PDmin=1.62xSW-3.54| PDmin=1.59xSW-3.54
PDmax=2.03xSW-5.12| PDmax=2.00xSW-5.12
1.6 Cleaning the lens
To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Toraysee TM cloth (delivered together with the lens kit). Order number :
R379058.
How to clean the lens?
Proceed as follow :
-
Always wipe lenses with a CLEAN Toraysee TM cloth.
-
Always wipe lenses in a single direction.
Warning : Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating. -
Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
-
If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
Do not use fabric softener when washing the cleaning cloth or softener sheets
when drying the cloth.
Do not use liquid cleaners on the cloth as doing so will contaminate the
cloth.
Other lenses can also be cleaned safely with this Toraysee TM cloth.
R5976663 TLD HB (1.6-2.0:1) LENS KIT 14102003
Revision Sheet
To: Barco nv Events/Documentation
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.70, Fax: +32 56.36.88.24
E-mail: antoon.dejaegher@barco.com, Web:
www.barco.com
From:——–
Date:—————-
Please correct the following points in this documentation (R5976663/00):
page———-
wrong———–
correct———
R5976663 TLD HB (1.6-2.0:1) LENS KIT 14102003
Barco nv Events
Noordlaan 5, B-8520 Kuurne
Phone: +32 56.36.89.70
Fax: +32 56.36.88.24
E-mail:events@barco.com
Visit us at the web: www.barco.com
Barco nv Intelligent Displays
Noordlaan 5, 8520 Kuurne
Phone: +32 56.36.82.11
Fax: +32 56.35.86.51
E-mail:presentations.bid@barco.com
Visit us at the web:www.barco.com
Printed in Belgium
Documents / Resources
|
BARCO R9842060 TLD HB 1.6 Zoom Projector Lens
Camera
[pdf] Instruction Manual
R9842060 TLD HB 1.6 Zoom Projector Lens Camera, R9842060, TLD HB 1.6 Zoom
Projector Lens Camera, Zoom Projector Lens Camera, Projector Lens Camera, Lens
Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>