Blue CORE 300 Premium Vocal Condenser Microphone Instruction Manual
- June 17, 2024
- Blue
Table of Contents
Blue CORE 300 Premium Vocal Condenser Microphone
CONGRATULATIONS ON YOUR PURCHASE
From Blue Microphones, makers of the world’s most innovative and inspiring studio gear, comes enCORE 300—a flagship condenser microphone that brings Blue’s legendary studio sound to the stage. enCORE 300’s proprietary, hand- tuned condenser capsule delivers open, detailed sound for every performance. And the rugged, tour-tough construction ensures enCORE 300 will withstand anything you encounter on the road.
KEY FEATURES
- Premium cardioid condenser capsule tuned for stunning detail and powerful vocals
- Innovative reinforced chassis to protect the capsule while allowing maximum airflow for smooth, open sound
- Blue’s proprietary phantom power circuit for consistent tone and minimal noise
- Blue’s proprietary floating capsule mount for high capsule isolation and minimal handling noise without pads or filters
- Stage-ready, heavy-gauge barrel construction and hardened metal-plated finishes and unique styling
TIPS FOR USING YOUR ENCORE 300
Your enCORE 300 should be plugged into a mic-level input using a standard 3-pin XLR cable. enCORE 300 requires 48-volt phantom power for proper operation, and will not produce reliable, clean sound without phantom power. A status LED is located on the barrel opposite the Blue logo, and will light when proper phantom power is being supplied. Microphone placement makes a big difference in how your enCORE 300 sounds. Generally, the closer you place enCORE 300 to a sound source, the higher the low frequency output. This is due to the “proximity effect.” For a more natural sound, simply pull the source back from the microphone 2-4 inches.
For more tips on microphones and recording, be sure to visit www.bluemic.com.
CARE INSTRUCTIONS
The enCORE 300’s metal-plated finishes will provide years of service and good looks if properly cared for. To clean your enCORE 300, simply wipe down with a damp cloth. Use of harsh cleaners or abrasives may cause damage to your enCORE’s surface finish.
enCORE 300 was designed for the rigors of daily use, and will stand up to demanding live performance or recording environments. We know performances can get pretty intense, but try to avoid excessive physical abuse or moisture exposure to the microphone— failure to do so could impact sound quality or reliability of your enCORE microphone.
SPECIFICATIONS
- Transducer: Condenser capsule
- Polar Pattern: Cardioid
- Frequency Response: 40Hz — 20kHz
- Maximum SPL: 146dB SPL
- Output Impedance: 25 ohms
- Sensitivity: 11mV/PA
- Dimensions—Length: 0.38 kg (0.84 lbs.)
- Dimensions—Diameter: 23mm/ .9 in. (min);
- 52mm/ 2in. (max)
- Weight: 0.38 kg (0.84 lbs.)
FREQUENCY RESPONSE & POLAR PATTERNS
These charts are only a starting point. How enCORE 300 reacts in a particular application will differ greatly because of many variables, including room acoustics, distance from sound source (proximity), tuning of instruments, mic cabling and other factors. For more tips on miking and recording techniques, check out the Blue website.
RELATED PRODUCTS
enCORE 100
- Dynamic Handheld Vocal Microphone
enCORE 100i
- Dynamic Instrument Microphone
enCORE 200
- Active Dynamic Handheld Vocal Microphone
ACCESSORIES
Included:
- enCORE Soft-Grip Microphone Clip
- enCORE Soft-Lined Storage Pouch
Check out www.bluemic.com for additional accessories and replacement parts for your enCORE Series Microphone.
WARRANTY
Blue Microphones warrants its hardware product against defects in materials and workmanship for a period of TWO (2) YEARS from the date of original retail purchase, provided the purchase was made from an authorized Blue Microphones dealer. This warranty is void if the equipment is altered, misused, mishandled, maladjusted, suffers excessive wear, or is serviced by any parties not authorized by Blue Microphones. The warranty does not include transportation costs incurred because of the need for service unless arranged for in advance. Blue Microphones reserves the right to make changes in design and improve upon its products without obligation to install these improvements in any of its products previously manufactured.
For warranty service or for a copy of Blue’s Warranty Policy including a complete list of exclusions and limitations, contact Blue at 818-879-5200. In keeping with our policy of continued product improvement, Baltic Latvian Universal Electronics (BLUE) reserves the right to alter specifications without prior notice.
Designed in USA. Made in China.
© 2016 Blue Microphones. All Rights Reserved. Blue Microphones, Blue Oval and enCORE 300 are registered trademarks of Blue Microphones.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>