UNONU J8 2G Bar Phone User Guide
- June 4, 2024
- UNONU
Table of Contents
2G Bar Phone
User Guide
Thank you for purchasing this innovative UNONU device. The specifications in
this document are subject to change without prior notice.
UNONU and the UNONU logo are registered trademarks of Swagtek, Inc. Other
trademarks are the property of their respective owners.
Charge for 24 hours before using.
Install SIM Card
/ Memory Card.
Get to know your
UNONU phone.
Connect your
UNONU phone to the computer using a USB cable (not included).
Copy music files from your computer to your UNONU phone. 
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
SAR Information Statement
Your wireless phone Is a radio transmitter and receiver. It Is designed and
manufactured not to exceed the emission limits for exposure to radiofrequency
(RF) energy set by the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific organizations
through periodic and thorough evaluations of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all
persons, regardless of age and health. The exposure standard for wireless
mobile phones employs a unit of measurement known as the Specific Absorption
Rate or SAR. The SAR limit set by the FCC is 1.6 W/kg.
Tests for SAR are conducted with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum value. This is because the
phone Is designed to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output. Before a phone
model is available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are performed in positions
and locations (e.g., at the ear and worn on the body) as required by the FCC
for each model. The highest SAR value for this model phone when tested for use
at the ear Is 0.396W/Kg and when worn on the body, as described in this user
guide, is 0.472W/Kg(Body-worn measurements differ among phone models,
depending upon available accessories and FCC requirements). The maximum scaled
SAR in hotspot mode is 0.498W/Kg. While there may be differences between the
SAR levels of various phones and at various positions, they all meet the
government requirement for safe exposure. The FCC has granted an Equipment
Authorization for this model phone with all reported SAR levels evaluated as
in compliance with the FCC exposure guidelines.
SAR Information on this model phone is on file with the FCC and can be found
under the Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID: 055185118 Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.* In the United States
and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg
(W/kg) averaging over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for the public and
to account for any variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 10mm must be
maintained between the user’s body and the handset, Including the antenna.
Third-party belt clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or approved antenna.
Warranty Certificate Terms and Conditions
UNONU warrants that its Products will be free from defects in material and
workmanship. The warranty period is one (1)year for the products and three (3)
months for the accessories which are part of the original package including
the battery. The warranty period begins on the date of purchase by the End-
User who shall present an invoice or a purchase receipt when requiring
warranty service otherwise the warranty period will begin from the date of
manufacture of the product. UNONU will repair a product without cost to the
customer if it presents a manufacturing defect or defect in workmanship during
the warranty period and if the defect occurred under normal conditions of use
in accordance with the instructions and specifications stated in the user’s
manual.
For additional information about the terms and conditions of UNONU’s Limited
Warranty or to obtain warranty service information, please visit the support
section at: unonumobile.com
unonumobile.com
Made in China
Copyright Swagtek, Inc 2019