BRAUN WK500 Multiquick Kettle Instructions

: June 17, 2024
: Braun

Table of Contents

Thank You
Important
Description
Before first use
Setting into operation
Automatic cut-off feature
Cleaning
Descaling
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BRAUN WK500 Multiquick Kettle

BRAUN WK500 Multiquick Kettle

Thank You

Thank you for purchasing the Braun Multiquick, we hope that the design and the rapid boil feature give you many years of pleasure.

Before first use, read the use instructions carefully and keep them for future reference.

Important

Make sure that your voltage corresponds to the voltage printed on the bottom of the kettle. The kettle may only be operated on the base (g) supplied.
WK 300: base type 3221
WK 500: base type 3222
This appliance is intended for household use only.
This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children.
Only use the kettle to heat water.
Only operate the kettle on a dry, flat and fixed surface.
Never let the cord hang down from the worktop. The cord length may be reduced by winding it up with the cord storage facility.
The base, the kettle or the cord must never get in contact with hot surfaces (e. g. stove plates).
In case the empty kettle is switched on accidentally, the overheating protection will cut it off automatically. In this case, allow the kettle 10 minutes to cool down before filling it with water.
Caution: Do not overfill the kettle! Water could boil over and cause scalding.
Do not open the lid while water is boiling.
During operation, the kettle will get hot. Therefore only use the handle to carry it. Always hold the kettle in an upright position, to avoid boiling water come out.
Check the cord regularly for possible damage.
If the appliance shows any defect, stop using it and take it to a Braun Service Centre for repair. Faulty or unqualified repair work may cause accidents or injury to the user.
Braun electric appliances meet applicable safety standards.
Model WK 500 only:
Make sure not to operate too many other electric appliances when using the kettle.
Socket fuse at least: 16 A

Description

a Scale filter (removable)
b Lid
c Lid release button
d On/off switch
e Water level indicator
f Pilot light
g Base with cord storage
Max. capacity: 1.7 l water

Before first use

Before using the kettle for the first time, fill it up twice with water to the maximum level and bring it to boil. Empty the kettle after boiling each time. After repeatedly boiling water it is normal that some condensation may have formed on the base of the water kettle. If this happens, just wipe dry with a cloth.

Setting into operation

Fill the kettle through the spout with the lid closed, or
1b press the lid release button (c), open the lid, fill with water and close the lid again (the kettle will not work with the lid open).
Place the kettle on the dry base and plug in the base.
Press the on/off switch (d), the pilot light will come on (do not open the lid when the kettle is switched on).
When the water has boiled, the kettle automatically switches off. You may also stop the heating procedure at any time by pressing the on/off switch (d).

Automatic cut-off feature

The kettle switches off when …

the water has boiled,
it contains no water (in case of accidental switching on),
the lid is opened,
it is taken off the base.

If the scale filter is not installed, the automatic cut-off will be delayed.

Cleaning

Before cleaning, unplug the base. Kettle or base must never be immersed in water. Clean the outside of the kettle with a damp cloth, the inner part can be cleaned by means of a brush. The removable scale filter is dishwasher proof.

Descaling

In order to extend the lifetime of the kettle, it should be descaled regularly.
Boil 0.8 l water in the kettle.
Important: Switch off the kettle and add 0.4 l household vinegar (4% acid). Do not boil the contents as it may cause spilling being a danger of scalding.
Let the mix of water and vinegar sit in the kettle overnight.
Empty the kettle and rinse the inside thoroughly with fresh water. Fill the kettle with fresh water and boil it.
Empty the kettle and rinse it again with fresh water.
If the kettle still contains scale, repeat this procedure.
To remove any scale from the scale filter, you may soak it in diluted vinegar.

Subject to change without notice.

Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.