VITA BARRE XB120+ Barre Portable Freestanding Double Ballet Barre Instruction Manual
- June 17, 2024
- VITA BARRE
Table of Contents
VITA BARRE XB120+ Barre Portable Freestanding Double Ballet Barre
Product Information
Specifications
- Model : XB120+
- Series: Extreme Series
- Available Lengths : 10′, 12′, 14′, and 16′
- Includes Center Support Leg
- Components : T’ Clamps (4), Vertical Bars (3), Horizontal Barres (4), Center Cross Clamps (2), Feet Assemblies (3)
- Manufacturer : Vita, Inc.
- Address : 40 Ellwood Ct. Greenviile, SC 29607
- Contact : Tel – 864-288-8934,
- Email – orders@vitavibe.com
Product Usage Instructions
- Ensure all components are present: T’ Clamps (4), Vertical Bars (3), Horizontal Barres (4), Center Cross Clamps (2), Feet Assemblies (3)
- Using the supplied hex wrench, fully insert the bars into all clamps as shown.
- Firmly tighten all set screws using the supplied hex wrench
- For ease of assembly, follow the numbered steps as shown in the manual.
- If the barre length is long, it is recommended to have a second person assist with the assembly.
- If the floor is not level, adjust the center cross clamps up or down to compensate for this.
- Before using the barre, make sure all set screws are firmly tightened.
- Periodically check the set screws for tightness and tighten if necessary.
Please keep this instruction sheet for future reference. If you need assistance with assembly or replacement parts, please contact Vita, Inc. directly. Do not return to the place of purchase.
FAQ (Frequently Asked Questions)
-
Q: What are the available lengths for the XB120+ Extreme Series Ballet Barre?
A: The available lengths are 10′, 12′, 14′, and 16′. -
Q: How many clamps and bars are included in the package?
A: The package includes 4 T’ Clamps, 3 Vertical Bars, 4 Horizontal Barres, and 2 Center Cross Clamps. -
Q: How should I tighten the set screws?
A: Use the supplied hex wrench to firmly tighten all set screws. -
Q: What should I do if my floor is not level?
A: If your floor is not level, adjust the center cross clamps up or down to compensate for this. -
Q: How often should I check the set screws for tightness?
A: It is recommended to periodically check the set screws for tightness and tighten if necessary.
Extreme Series Ballet Barre ( 1 O’, 12′, 14′ & 16′ models with center support leg)
Assembly Instructions
- Fully Insert bars into All clamps as shown and firmly tighten all set screws with the supplied hex wrench. For ease of assembly, follow the numbered steps as shown above. Depending on the barre length you may need the help of a second person.
- Note: If your floor is not level you may need to adjust the center cross clamps up or down to compensate for this.
- Before using make certain all set screws are firmly tight.
- Periodically check set screws for tightness and tighten if necessary.
DISCLAIMER : As with any therapy or exercise equipment, use of this equipment should only be used by persons who are physically able to use the equipment as it is designed for. Proper safety gear such as padded mats, shoes, clothing and the like should always be used. This equipment should not be used alone. Always have someone nearby in case of an emergency. Vita, Inc. and it’s affiliates will not be liable for any injury or death resulting from use of this equipment. User assumes responsibility for proper assembly, maintenance and use of this equipment.
Please keep this instruction sheet for future reference. Should you need assistance with assembly or replacement parts contact us directly. Do not return to place of purchase.