ASUS SBC-06D2X-U External Slim Blu-Ray Drive User Guide

SBC-06D2X-U External Slim Blu-Ray Drive
User Guide

Safety Information

• Do not place damaged discs inside the device. A damaged disc may break while in use and damage the device.
• Use of any controls, adjustments, or procedures other than those specified in this manual may result in hazardous radiation exposure.
• Do not attempt to disassemble the drive.
• Do not move the device from a cold to a warm or hot environment. A drastic change in temperature is harmful to the device.
• Before moving or uninstalling the drive, remove any disc in it.
• Prevent liquids or any metal from getting into the device, If this situation occurs, contact your retailer for help.
• Do not use any evaporating solvents to clean the device. If you accidentally sprayed any solvent on the device, use a clean cloth to wipe it. You may also use a neutral cleaner to dilute the solvent to easily wipe it from the device.
• Do not turn off the computer while the device is in reading or writing mode.
• Do not place discs into the device immediately if they came from a cold environment, especially during cold seasons. Wait until the discs have reached room temperature.

CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT

Australia Statement Notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit http://support.asus.com. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASUS Customer Service at 1300 2787 88 or visit us at http://support.asus.com.

India RoHS
This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits the use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs), and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products on the ASUS REACH website at http://csr.asus.com/english/REACH.htm.

ASUSTeK Computer Inc.
4F, No. 150, LI-TE RD., PEITOU,
TAIPEI, TAIWAN| ASUS COMPUTER GmbH
HARCOURT STR. 21-23, 40880
RATINGEN, GERMANY
---|---

ASUS Recycling / Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries, and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in a different regions.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with the Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)

FCC COMPLIANCE INFORMATION
Per FCC Part 2 Section 2.1077

hereby declares that the product

compliance statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Package Contents

Optical Drive| Stand| USB Y Cable| Software| Quick Install Guide

System Requirements for Playing Blu-ray Discs (for Blu-ray Drive Only)

® Graphics G965, HD3000, or HD4000 series graphics software decoder (Intel ® Core™ 2 Duo E6700 (2.66 GHz) and above is recommended)

• Use HDCP compatible display and VGA card to get High Definition digital output.
NOTES

• Refer to CyberLink website http://www.cyberlink.com for more details.
• Specifications are subject to change without notice.

Step 1 Place the optical drive on a stable surface

NOTE You can either lay the optical drive horizontally on a stable surface or use it with the bundled stand. To install the optical drive onto the vertical stand (model with stand only):

A. Place the vertical stand on a stable surface.
B. Insert the stand into the groove at the back of the optical drive.
To uninstall the optical drive from the stand (model with stand only):
Hold the stand firmly with one hand and with the other hand, carefully pull the optical drive outward until it separates from the stand.

Step 2 Connect the optical drive to your computer

A. Connect the bundled USB Y cable to your computer.

NOTES

• The bundled USB Y cable comes with two USB connectors and one mini-USB connector. We recommend that you connect both connectors to two USB ports on your computer for a sufficient power supply (see A1).
• For some computers that cannot provide sufficient power, you may need an extension cable (see A2).
• The extension cable is purchased separately.
• We DO NOT guarantee the performance of the optical drive connected using a USB hub.

B. Connect the mini-USB connector of the bundled USB Y cable to the mini-USB port of the optical drive (see B).

Step 3 Ensure that your system detects the external optical drive

To check if the optical drive is detected using Device Manager:

Windows® XP SP3| Right-click My Computer, then click Properties > Hardware > Device Manager.
---|---
Windows® Vista / 7 SP1| Click Start, then right-click My Computer. Click Properties > Device Manager.
Windows® 10 / 8.1 / 8| Click + X and then click Device Manager.

In Device Manager, click next to DVD/CD-ROM drives to expand the list. If the external optical drive is detected properly, the name of the drive is displayed on the list.

Step 4 Safely remove the external optical drive

The external optical drive supports Plug & Play. To safely remove the drive:
A. From the taskbar of your computer, click the Safely Remove Hardware icon ( ).
B. On the pop-up message, click Safely Remove Hardware and Eject Media. C. On the pop-up message, click The device can now be safely removed from the computer to disconnect the USB Y cable from your computer.
NOTE DO NOT disconnect the USB Y cable when the system is booting up or the activity LED of the external optical drive is blinking.

Troubleshooting

If your computer cannot detect the external optical drive, follow the steps below:

1. Shut down your computer.
2. Check if the USB Y cable is connected properly. See Step 2 Connect the optical drive to your computer for details.
3. Turn on your computer.

NOTE For more technical service, contact your retailer or ASUS Technical Support.

SBC-06D2X-U • SBW-06D2X-U
For a superior burning experience
V 6.7 Published June 2018
Copyright © 2018 ASUSTeK Computer Inc. All Rights Reserved.
15060-34210500

References

• Global Take Back Service | Resource Regeneration | Circular Economy | ASUS ESG website, ASUS ESG goal
• #1 Video Editing & Photo Editing Software + Media Player | CyberLink

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>