CAMDEN CX-IRB Isolation Relay Instructions
- June 17, 2024
- Camden
Table of Contents
CAMDEN CX-IRB Isolation Relay
CX-IRB
Isolation Relay
INSTALLATION INSTRUCTIONS
DESCRIPTION
The CX-IRB is Camden’s Double Pole Double Throw (DPDT) Isolation Relay. It can
be used to aid any installer when dealing with integrations that provide
excessive power sources or to isolate environmental issues such as electrical
noise or induced voltages from unwanted sources.
It can accept 12 or 24 VDC to operate. With its small footprint (1.5” x 2.75”)
it can be installed into any door operator or existing electrical enclosure.
SPECIFICATIONS
| Input Voltage | 12/24 VDC |
|---|---|
| Current Draw | 40 mA @ 12/24 VDC |
| Contacts | 8 amps @ 30VDC/120VAC |
| Status | Red LED (activated when on) |
| Temperature | – 40°C to 70°C (-40° to 158°F) |
| Dimensions | 0.79″ H x 1.5″ W x 2.76″L (20mm x 38mm x 70 mm) |
OPERATION AT A GLANCE
When the CX-IRB’s JP1 jumper is set for the desired VDC voltage (12 or 24
volts) and voltage is applied to V+ for positive and V- for negative (GND) the
DPDT relay will energize.
This DPDT relay will provide two independent poles offering both changes of
state to pick from (N.O. & N.C.) to drive up to two independent functions and
offering 4 changes of state.
Opening New Doors to Innovation, Quality and Support!
Call: 1.877.226.3369 / 905.366.3377
Visit: www.camdencontrols.com
File: CX-IRB_Manual.indd
Rev.: 11/22/19
Part no.: 40-82B233
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>