CALIBER RMD 602 Receiver User Guide
- June 17, 2024
- CALIBER
Table of Contents
RMD 602 QUICKSTARTGUIDE
User Guide
SPECIFICATIONS
GENERAL
Power supply: 12V DC (11V-16V)
Test voltage: 14.4V, negative ground
Maximum power output: 75W x 4 channels
Continuous power output: 20W x 4 channels (10% TH.D.)
Suitable speaker impedance: 4-8ohm
Pre-Amp output voltage: 20V (Play mode: 1KHz, 0dB, 10K load)
Fuse: 15A
Dimensions (WxHxD): 178 x 50 x 166mm
Weight: 1.7kg
Aux-in level: >500mV/
3Inch (4:3) TFT LCD
Display resolution (dot)
Active area (mm)
Screen size (inch)
Dot pitch (mm)
Contrast ratio
Brightness
960(W)x240(H)
60.00×45.00
3.0 (Diagonal)
0.0625 x 0.1875
300
350nits
FM Stereo Radio
Frequency range: 87.5-108.0MHz (Europe)
87.5-107.9MHz (America)
Usable sensitivity: 8dBy
Frequency response: 30Hz-15KHz
Stereo separation: 30dB (1KHz)
Image response ratio: 50dB
IF response ratio: 70dB
Signal/noise ratio: >55dB
AM(MW) Radio
Frequency range
Usable sensitivity (S/N=20dB)
522-1620KHz (Europe)
530-1710KHz (America)
30dBμ
USB/SD/MMC Notes
USB functions (flash memory type) MP3 music play
-
SDIMMC card support up to 32GB
-
USB flash memory 2 in 1 (SD/MMC) support
-
FAT 32 (dir: 180 support, file: 1500 support)
-
Tag (ID3 Tag ver 2.0)
Title/artis/album: 30 byte support -
Multi card reader not support
-
USB 1.1 support
USB 2.0 support
(it can not support USB 2.0 speed. Just, get the same speed with USB 1.1)
File Type Supported
Audio file: MP3(.mp3),
WMA(.wma)
Video file: MPEG4 (.avi, DIVX3.11/4.0/5.0/6.0)
MPEG 1 (.dat)
Picture file: JPEG (*jpg)
MP3 file: 1SO 9660 or ISO 9660 + Joliet format
Max. 30 characters.
Max. nested directory is 8 levels.
Max. album number is 99.
Max. length of each track is 99 minutes 59 seconds.
Supported sampling frequency for MP3: 8KHz to 48KHz (44.1KHz preferably).
Supported bit-rates of MP3 are: 32 – 320 kbps (128 kbps preferably).
File NOT Supported
.AAC, .DLF, .M3U, .PLS, MP3 PRO files and files with DRM.
Components
| Mounting sleeve: | 1 |
|---|---|
| Machine screws M5x6mm: | 4 |
| Mounting bolt (50 mm): | 1 |
| Wire connector: | 1 |
| Removable face plate case | 1 |
| Trim plate | 1 |
| Removal key | 2 |
| Operating Instructions | 1 |
| Rubber cushion | 1 |
| Remote control | 1 |
MOUNTING METHOD
RMD 602 CONNECTION DIAGRAM
PRECAUTIONS
- Use only in a 12-volt DC negative-ground electrical system.
- Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit.
- When replacing the fuse, be sure to use one with an identical amperage rating
- Usinga fuse with a hgher amperage raung may cause serious damage t@ che uic
- DO NOT attempt to disassemble the unit. Laser beams from the optical pickup are dangerous to the eyes.
- Make sure that pins or other Objects 4o not get nside the unlt hey may cause malfunctions,or creace afety hazards such as electical shock or aser beam exposure,
- If you have parked the Gar for 2 Jong time it Rot o cold weather, walt Ut the temperaare in the Gar become normal before operacng the i
- Keep the volume at a level at which you can hear outside warning sounds (horns sirens, etc.).
-
– Short press to select playing mode:
« Radio
+ USB (when USB inserted)
+ SD (when SD/MMC inserted)
+ AV (front audio & video input. External peripheral devices can be connected with the unit.)
– Long press to return to main source menu when in any mode, then use navigate button to select the desired mode, and press OK button to confirm -
Cancel source select menu and return to previous menu
-
– Press to navigate up among option items (in MP3/WMA mode)
– Play the previous preset radio station (in Radio mode) -
– Press to navigate down among option items (in MP3/WMA mode)
– Play the next preset radio station (in Radio mode) -
– Power on/off (press and hold more than 2 seconds)
– Mute -
3inch TFT display
-
SD card slot
-
USB port
-
– Rotate the knob to adjust volume level
– Press to select audiolvideo Setting, and rotate the knob to adjust level.
– Press more than 2 seconds to Setting menu. -
Panel open
-
– Play/Pause (in MP3/WMA modes)
– Band switch: FM1-FM2-FM3-MW1-MW2 (in Radio mode) -
– Preset scan (press briefly, in Radio mode)
– Auto preset (press more than 2 seconds, in Radio mode)
– Stop (in MP3WMA mode) -
– Search the previous station manually, and each press to seek step by step (press briefly, in Radio mode)
– Search the previous station automatically (press more than 2 seconds, in Radio mode).
– Press to search the previous track or chapter (in MP3WMA mode).
– Fast backward by 2, 4, 8, 20 step (press more than 2 seconds, in MP3/WMA mode).
– Press to navigate left among option items -
– Search the next station manually, and each press to seek step by step (press briefly, in Radio mode).
– Search the next station automatically (press more than 2 seconds, in Radio mode).
– Search the next track or chapter (in MP3 / WMA mode).
– Fast forward by 2, 4, 8, 20 step (press more than 2 seconds, in MP3/WMA mode).
– Press to navigate right among option items -
– Confirm operation
– Stop auto seeking (in Radio mode). -
Remote sensor
-
AVin
Reset button is behind the detachable frontpanel -
Power on/off
-
Setup
-
Menu cursor
-
Enter
-
Program
-
Digit area
-
Select Audio/Video
Setting, then rotate the knob to adjust level. -
Volume
-
– Radio tune
– Track skip/seek -
Source switch
-
Zoom
-
Repeat
-
Repeat A-B
-
Stop/Return
-
Play/Pause
-
Goto search
-
– OSD:
On screen display
– AMS: Search and store stations automatically -
– DISP: Display time/ clock (Video mode)
– ESC: Return to previous menu -
– Video system PALINTSC/AUTO
– Radio band (in Radio mode) -
Mute