Camden CM-AF500 Illuminated Annunciator Instruction Manual
- June 17, 2024
- Camden
Table of Contents
Camden CM-AF500 Illuminated Annunciator
PACKAGE CONTENTS
| 1 | Faceplate with clear lens |
|---|---|
| 1 | Foam gasket |
| 1 | Bracket with LED board |
| 2 | #6 Nylon lock nuts |
| 6 | Label Inserts |
| 2 | #6-32 x 1” Tamperproof screws |
| 2 | #6-32 x 1” SS FLT HD screws |
| 1 | Tamperproof drive |
Description
CAMDEN DOOR CONTROLS CM-AF500 Illuminated Annunciator is designed for industrial and commercial applications, where illuminated signage is required. The faceplate is Stainless Steel with a 1-3/8” Square Lens. The CM-AF500 can be fitted with 1 of 6 labels provided. This unit requires 12 VDC or 24 VDC to operate.
Application
Camden illuminated Annunciator is ideal for high traffic areas that require a visual indicator for an occupied or locked space such as a conference room, restroom or a secure area. It can be surface or flush mounted. Camden Illuminated Annunciator is designed to be controlled by electric locks, electromagnetic locks, electric strikes, automatic doors, and low energy operators.
Wiring
Refer to the table for 12 VDC or 24 VDC power connections.
| Wire Color | Connection |
|---|---|
| Red | 12/24 VDC +/- 10% |
| Black | Common |
WARNING:
Do NOT apply power to the unit until all wiring
Do NOT apply A/C power. AC must be rectified. (Use CX-5024)
Installation
CM-AF500 is supplied with a stainless steel faceplate that can be easily mounted to a single gang electrical box. Only 9/18” depth is required!
Labels Included
Installing Labels
- Center the desired label over the plastic lens on the back of the faceplate.
- Place diffuser plate over the label.
- Place the LED assembly over the diffuser and label. The LED holder and clamp have two tabs to hold the label and diffuser in place. Be sure to line up the clamp so both tabs are holding down the assembly.
- Install the nylon lock nuts. Tighten the nylon lock nuts until the diffuser and label assembly are clamped in place and cannot move.
WARNING :
Be careful not to over tighten the two nylon lock nuts as damage to the
plastic diffuser may occur.
Custom Labels
Custom message inserts (color, text, graphic) available on request. Contact customer service for a free quotation.
Feature
-
Push Buttons
-
Keypads
-
Strikes
-
Magnetic Locks
-
Key Switches
-
Relays & Timers
-
Access Control
Customer Support
FS 541752
Certified ISO 9001: 2008
5502 Timberlea Blvd., Mississauga, ON Canada L4W 2T7
www.camdencontrols.com
Toll Free: 1.877.226.3369
File: CM-AF50O
Installation Instructions.indd R2
Revised: May 20,2014
Part No.: 40-82B147
