Woodpeckers DWP611 ADE-WALT Trim Router Base Owner’s Manual
- May 15, 2024
- Woodpeckers
Table of Contents
Woodpeckers DWP611 ADE-WALT Trim Router Base
Part description
DIAGRAM
NUMBER
|
QTY
|
PART NAME
---|---|---
1|
1
| Base
2|
1
| Handle
3|
1
| Centering Pin
1
| Handle Screw, 1/4-20 x 5/8”
4
| Pan Head Screws, M4 x .7mm
Scan the QR code above to watch the video or visit woodpeck.com under the video tab towards the bottom of the product page.
- Secure the Handle 2to the top of the Base 1 with the Handle Screw. FIGURE A.
- Align your router with the corresponding holes in the StabilMax Base. FIGURE B.
- Secure your router to the Base using the (4) Pan Head Screws.
If Using a Template Guide Bushing
- Loosen but do not remove the Pan Head screws that secure the StabilMax Base to your router.
- Place the template guide bushing in base plate and tighten securely.
- Insert Centering Pin 3 into router collet and tighten.
- Adjust depth of cut until cone of Centering Pin contacts the inside of the template guide bushing.
- Adjust position of base until cone is contacting template guide bushing uniformly around its circumference.
- Tighten the (4) Pan Head Screws.
- Remove Centering Pin.
NOTE: Centering Pin requires template guide bushing between 1/4″ and 9/16″. If your project requires a larger template guide bushing, use one in this range to center, then change before proceeding.
- Align router so switch faces away from Handle (except Milwaukee).
- Actual size to aid in alignment FIGURE B.
WARNING! To reduce the risk of injury keep hands away from moving parts. Refer to your power tool manual for proper setup and use.
WARNING! To reduce the risk of injury, wear safety goggles or glasses with side shields, ear protection & a dust mask.
Woodpeckers, LLC Strongsville, Ohio
woodpeck.com
© 2023 Woodpeckers, LLC
At Woodpeckers we are constantly reviewing & improving our tools.
The most current version of our instruction manuals are always available to
download at woodpeck.com.
(Located in the bottom section of the tool’s page under the “Additional
Information” or “Instructions” tabs.)
Be the first to know all the new products, OneTIME Tools & sales by subscribing to our eClub. (Located at the top center of our webpage woodpeck.com.)
Subscribe to our YouTube channel to stay up-to-date on all the latest tool tips & tricks.
INTERACT WITH US! Follow us on Facebook, Instagram & TikTok!
Enjoy shop tips, project ideas, tool techniques & more in our Woodworking
Resource Center/Blog. (Located at the bottom center of our webpage
woodpeck.com.)
WARNING! This product can expose you to chemicals, including bisphenol,
which is known to the State ofCalifornia to cause cancerand birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov