JABLOTRON TP-98TX Wireless Thermostat Instruction Manual
- June 16, 2024
- JABLOTRON
Table of Contents
JABLOTRON TP-98TX Wireless Thermostat
Specifications
- Power Source: two AAA 1.5V Alkaline batteries
- Temperature Measurement:
- Temperature Accuracy:
- Temperature Control:
- Temperature Control Span:
- Output On Delay: 20 seconds
- Working frequency: 433,92 MHz
- Working distance: up to 100 m (open area)
- Coding: digital, each thermostat has a unique floating code
- Operating Temperature:
- Storage Temperature:
- Size: 73.5 X 28.0 X 73.5 mm
- Material: Polycarbonate (PC)
- Weight: 90 g (battery not included)
Product Information
The Wireless Thermostat TP-98TX is designed to replace a common indoor residential thermostat and can be used with electric, gas or oil heating systems. It features an easy-to-read display that shows the current room temperature and allows for simple temperature adjustment.
The TP-98TX wireless thermostat is compatible with Jablotron’s wireless receivers UC-222, UC-241, and UC-242. The radio communication provides high reliability and allows for easy installation.
Installation
Enrolling the TP-98TX into the Receiver
Note: Each UC-222 receiver can work with only one thermostat. If the receiver unit was used with any other device before, reset its memory before enrolling a thermostat.
Temperature Setting
In the normal operation mode, the thermostat shows the room temperature. To set a desired temperature:
FAQ
Q: What is the power source for the TP-98TX Wireless Thermostat?
A: The power source for the TP-98TX Wireless Thermostat is two AAA 1.5V Alkaline batteries.
Q: What is the working frequency of the thermostat?
A: The working frequency of the thermostat is 433,92 MHz.
Q: What is the working distance of the thermostat?
A: The thermostat has a working distance of up to 100 m (open area).
Q: How can I dispose of the batteries safely?
A: Depending on the type of batteries and local regulation, it is recommended to return the product to the dealer or directly to the producer after usage.
This thermostat can replace a common indoor residential thermostat and is
designed to be used with electric, gas or oil heating system. The easy to read
display shows the current room Temperature and temperature adjustment is very
simple.
The TP-98TX wireless thermostat is compatible with Jablotron’s wireless
receivers UC-222, UC-241 and UC-242. Radio communication provides high
reliability and allows for very easy installation as well.
INSTALLATION
The TP-98TX should be mounted in a dry indoor location. This thermostat has been designed for easy installation. Choose a mounting location about 1.5 meters above the floor, in an area with good air circulation. Avoid places with drafts, dead air spots and radiant heat from the sun or appliances. It should not be installed close to any metal structure or other objects that may obstruct radio signal transmissions.
- Remove completely the front housing of the thermostat. (using a screwdriver)
- Drill two holes and insert the plastic dowels.
- Attach the thermostat to the wall with the two screws.
ENROLLING THE TP-98TX INTO THE RECEIVER
- Slide the battery cover upward to open it.
- Remove the batteries from the thermostat if there are any.
- Enter the enrolling mode of the receiver unit (UC-222, UC-241, UC-242) – See corresponding instruction manual
- Place the batteries into the thermostat. Ensure the correct polarity of the batteries.
- The receiver will confirm successful enrollment
- Push and slide the cover down to close it.
Note: Each UC-222 receiver can work with only one thermostat. If the receiver unit was used with any other device before, reset its memory before enrolling a thermostat.
TEMPERATURE SETTING
In the normal operation mode, the thermostat shows the room temperature. To set a desired temperature:
- Press button to view the previous temperature, which et last time.
- Hold button for about 3 seconds and the temperature indicator will flash one time. Press ?or button to increase or decrease the temperature setting. The unit will return to normal operation mode automatically after 10 seconds with out any button being pushed..
- The programmed temperature range is from 5°C to 35°C.
The temperature span between the turn ON and OFF is 1°C. For example, if the
control temperature setting is 20°C, \the heater will operate when the room
temperature drops to 19.5°C and will be turn off when the temperature rises to
20.5°C. When the thermostat is on, the symbol Heater On is indicated.
When the temperature is above 40°C ‘HI’ will be shown on the LCD and ‘LO’ will
be shown when temperature falls below 0°C.
When the voltage of the battery is low, the LCD will turn off. In this case,
the batteries should be changed as soon as possible.
SPECIFICATIONS
- Power Source: two AAA 1.5V Alkaline batteries
- Temperature Measurement: 0 – 40°C
- Temperature Accuracy: ±1.0°C
- Temperature Control: 5 – 35°C
- Temperature Control Span: 1°C
- Output On Delay: 20 seconds
- Working frequency 433,92 MHz
- Working distance up to 100 m (open area)
- Coding: digital, each thermostat has a unique floating code
- Operating Temperature: -10°C to 50°C (non-condensing)
- Storage Temperature: -30°C to 60°C
- Size: 73.5 X 28.0 X 73.5 mm
- Material: Polycarbonate(PC)
- Weight: 90 g (battery not included) Can be operated according to ERC REC 70-03
Hereby, Jablotron Ltd., declares that this TP-98 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Note: Dispose of batteries safely depending on the type of the batteries
and local regulation. Although this product does not contain any harmful
materials we suggest you to return the product to the dealer or directly to
the producer after usage.
TP-98TX Wireless Thermostat
Pod Skalkou 33 466 01 Jablonec nad Nisou Czech Republic
Tel.: +420 483 559 999
fax: +420 483 559 993
Internet: www.jablotron.cz