COMICA CVM-V30 PRO Directional Condenser Shotgun Video Microphone User Manual
- June 17, 2024
- COMICA
Table of Contents
CVM-V30 PRO
Directional Condenser Shotgun Video Microphone
USER MANUAL
Foreword
Thanks for purchasing COMICA CVM-V30 PRO Cardioid Directional Microphone, the item is specially designed for professional DSLR, Camcorder to work for review, meeting, video,etc. It comes with very sensitive directing and built- in electric circuit design, which takes you extra multi-functions like ‘Adjusted sensitivity’, ‘Low-cut Filter’ ,etc, and make your audio with good- quality.
Main Features
- Super Cardioid Polar Pattern
- Low-cut Filter
- 10dB Adjustable Sensitivity
- Low Self-noise
- Super Anti-interference
- Special Design for Excellent Shock-absorbing
- Packed with Wind-Screen and Wind-Muff
- Cold-shoe Design with 1/4 Thread at Bottom
Notice
Please carefully read this user manual before using
The LED Indicator light will keep on with green color to help you check
if the item or power normally work
The product is belong to the super accurate instrument,please pay
attention to avoid any dropping, collision or thump
Please do not put the device beside the heat or interference source,
like radiator,
Roaster or air-condition etc
Please keep this product in the dry environment
Do not expose this device in rain or moist environment
Package Contents
- Mic Body (Including Windscreen)
- Wind Muff
- User Manual
- Warranty Card
Components and Instruction
Mic Body
- Mic Body and Windscreen
- AAA Battery Holder
- Low-cut Filter Button
- Power/Sensitivity Button
- Working Indication
- Fixing Screw
- 1/4 Cold-shoe Mount
- Shock Mount
- 3.5mm Audio Output Cable
Installation and Usage
-
Installation
1.1 Put Batteries into Microphone
1.11 Refer to the illustration, Press down the battery door and follow the arrow to push outward, then the battery door is opened
1.12 Put
into the batteries, and then push forward to close the battery door
1.2 Install the
Wind-Muff to Microphone
1.21 Open the Wind Muff from the “INSERT HERE”
1.22 Insert the mic into the Wind Muff
1.23 Stretch the
end of the wind Muff
1.24 Wrap
the end of the mic with the end of Wind Muff
1.3 Install the
Mic onto Camera
1.31 Connect the Mic onto the Camera via cold-shoe, then fasten the fixing screw
1.32 Connect
the 3.5mm audio cable of Mic into the Camera
-
Operation
2.1 Low-cut Filter function
Refer to the illustration, switch the low-cut filter function button to right position, then the function works
Low-cut
Filter Note:
Filter background frequencies lower than 80Hz, such as unwanted noise produced by wind, focusing, traffic, etc.
Recording maybe be adversely affected by using the low-cut filter, so only use as needed
2.2 Indication Lamp Status
2.3 Power/+10 dB Sensitivity Adjusting Function
2.31 Switch the button to ‘on’ position, then the mic go into the normal voice picking-up status
2.32 Switch
the button to ‘+10 dB’ position, then the sensitivity can be increased with 10
dB,The recording sound will be increased accordingly
2.33
Switch the button to ‘off’ position, then the mic is powered off
Specification
Specification:
| Polar Pattern | Super Cardioid |
|---|---|
| Frequency Range | 40Hz~20,000Hz |
| Sensitivity | -33dB±2dB/-23dB±2dB |
| Output Impedance | 200 Ω |
| Dynamic Range | 100dB |
| Max. SPL | 114dB |
| Signal to Noise Ratio | 78dB |
| Audio Output | 3.5mm |
| Battery | AAA 1.5V x 2 |
| Battery Life | 200h |
| Weight | 114g |
| Dimension | 210 x 62 x 80mm |
Frequency Response:
Polar Pattern :
The COMICA LOGO is trademark which is registered and owned by Commlite
Technology Co.,Ltd
Email: support@comica-audio.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>