COMICA B0CNXX8C28 Vimo Q 4 Channel Wireless Lavalier Microphone System User Manual

COMICA B0CNXX8C28 Vimo Q 4 Channel Wireless Lavalier Microphone System

Foreword

Thank you for purchasing Comica Vimo Q Wireless Microphone

Main Features

• Four-channel Wireless Microphone, Mini and Portable
• 48kHz/24bit Record, CD-level Sound Quality
• Brand-new Cal Mix Audio Processing, One-key Denoise
• Support 4 Audio Tracks Mixing and Individual Output
• Digital/Analog Outputs, Universal for Camera/Smartphone/PC
• Support Real-time Monitoring, Mute, Volume Control, M/S Switch
• HD Screen Display, Support Screen Flip
• Internal and External MIC Two Input Modes
• USB-C Charging Port, Support Charging While Using
• Charging Storing Case, Duration Up to 16H
• Low Latency<20ms, Working Range Up to 200M

Notice

It is better to keep face to face when using it and not turn your back to the receiver. Otherwise, it is easy to generate breakpoints, which is a normal phenomenon
Please notice that the STEREO function can not be realized when recording in single-channel
Quad mode is not supported when outputting audio through USB interface
There will be a “ticking” sound when switching on/off the quad mode.
It is recommended to select the corresponding mode before recording
The product is a high-precision equipment, please prevent it from falling, collision, or pounding
Do not use this device near sources of heat or interference, such as radiators, ovens, refrigerators, air conditioners, etc
If the sound pickup distance is close or record outdoors, please put the wind muff on the transmitter to prevent sound bursting or reduce wind noise
Please keep the product in a dry environment; do not use the equipment in rainy or damp environments to avoid short-circuit danger

Packing List

1. Transmitter*4
2. Receiver
3. Charging Case
4. 2-in-1 Charging/Audio Output Cable
5. 3.5mm TRS-TRS Audio Cable
6. 3.5mm TRS-TRRS Audio Cable
7. Wind Muff*4
8. User Manual
9. Warranty Card
   

Components and Instruction

Transmitter (TX)

1. 3.5mm TRS External Mic Interface

2. Internal Mic

3. Power/ Mute Button
   Long press for On/Off; short press for muting switch

4. Denoise/Volume Up Button
   Long press to turn on/off denoise; shot press to increase the volume

5. Pair/Volume Down Button
   Long press to enter pairing state; short press to decrease the volume

6. Working Indicator Light
   Red light on when muting; green light on when denoising, blue light on in original sound

7. USB-C Charging Port
   To connect a power bank/DC power supply through the 2-in-1 charging/audio output cable for charging

8. Belt Clip

9. Charging Pad
   

Receiver (RX)

1. 3.5mm TRS Audio Output Interface
   In mono mode, output a mixing audio of A/B/C/D four channels;
   In stereo mode, output two individual audios. A/C channel is the left channel, B/D channel is the right channel;
   In quad mode, output two individual audios of A/B channels

2. 3.5mm TRS/TRRS Monitoring/Audio Output Interface
   In mono/stereo mode, plug in 3.5mm TRS/TRRS headphones to monitor;
   In quad mode, output two individual audios of C/D channels

3. Reset Hole
   If there are abnormal phenomena such as crashes or failure to turn on, insert a pin into the reset hole to reset and restart automatically

4. USB-C Charging/Audio Output Interface
   To connect the power bank/DC power supply for charging or connect mobile phone/computer for digital audio output through the 2-in-1 charging/audio output cable

5. Power/Mode Switch Button
   Long press for On/Off; short press to switch mono/stereo modes

6. Pair/Screen Flip Button
   Long Press to enter pairing state; short press to flip the screen

7. Charging Pad

8. Belt Clip
   

Screen Display:

Charging Case:

1. Power Indicator Light
   There are four lights, each representing 25% of the power

2. Pair/Awake Button
   Long press to pair the microphone; short press to awake the microphone

3. Reset Hole
   If the device cannot be charged, insert a pin into the reset hole to reset it

4. USB-C Charging Port
   To connect a power bank/DC power supply through the 2-in-1 charging/audio output cable for charging
   

Installation and Usage

Pairing Method (All have been paired by default. If you need to re-pair, please follow the instructions)

Place the transmitters and receiver within one meter and long press their power buttons to switch on, then long press their pair buttons to enter the pairing state. During the pairing state, the indicator lights of transmitters alternately flash red, blue, and green, and the receiver screen shows” Pair….”. After successful pairing, the indicator lights of the transmitters turn blue, and the receiver screen displays the status of the connected channels.

If any transmitter is not paired, please turn off all transmitters and receiver, and then follow the above steps to pair again.

Installation

Transmitter (TX)

To choose internal mic or external mic according to personal needs

1. When using the internal mic, it is recommended to fix the belt clip outwards for better concealment
2. When using an external mic, the internal mic will automatically turn off

Receiver (RX)

Mono/Stereo Mode

3.5mm Analog Output
When used with a camera, connect it through the 3.5mm TRS-TRS audio cable; When used with a mobile phone or computer, connect it through the 3.5mm TRS- TRRS audio cable and related OTG audio cable/adapter; to monitor according to personal needs (please purchase the relevant audio cable/adapter by yourself)

In stereo mode, A/C channel is the left channel, B/D channel is the right channel

USB Digital Output

Connect the receiver and mobile phone/computer through the 2-in-1 charging/ audio output cable and related OTG audio cables/adapters; to monitor according to personal needs (please purchase the relevant audio cable/adapter by yourself)

Quad Mode

Connect the receiver and recorder/mixer through a 3.5mm TRS-TRS/ 3.5mm TRS-XLR dual heads audio cable to output four individual analog audios of A/B/C/D channels(Please purchase relevant audio cables by yourself)

Quad mode is not supported when outputting audio through USB interface

Specification

Li-polymer 2900mAh 3.7V
Charging Time| TX: 3 Hours RX: 3 Hours
Charging Case:3 Hours
Battery Life| TX: 8 Hours RX: 8 Hours
Charging Case:1 Time
Net Weight| TX: 16g RX: 37g
Charging Case: 330g
Dimension| TX: 51 x 24 x21mm
RX: 54 x 48 x 22mm
Charging Case: 186 x 93 x 63mm
Working Temperature| 0℃ ~ 50℃
Storage Temperature| -20℃ ~ 60℃

CUSTOMER SUPPORT

Website: comica-audio.com
Facebook: Comica Audio Tech Global
lnstagram : Comica Audio
YouTube : Comica Audio
COMICA is a registered trademark owned by Commlite Tech Co.,Ltd
Email: support@comica-audio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>