ACOUSTICS FS75 Speakers Stands Owner’s Manual
- June 4, 2024
- ACOUSTICS
Table of Contents
ACOUSTICS FS75 Speakers Stands
Introduction
Thank you for purchasing a pair of Q Acoustics Q FS75 Floor Stands.
This manual is intended to take you through the setup and installation of the
Q FS75 Floor Stands. It will help provide a trouble-free setup and ensure
optimum performance from the product. Please read the instructions, important
safety information and warnings carefully before installation and use, to
ensure the safe and satisfactory operation of this product.
Designed to offer unprecedented unity when partnered with the Concept 30 / Q Active 200 Speakers, the stand and speaker together deliver previously unimaginable levels of performance and fidelity. The Q FS75 Floor Stand has an extremely low surface area, which reduces re-radiated sound to virtual nil. It’s less a speaker stand, and more an entirely new loudspeaker support concept. We hope you enjoy the Q Acoustics experience.
Important Safety Information and Warnings
- Spikes should be fitted where floors are carpeted, for all exposed floors – wood, tiled etc use the rubber spike covers. To avoid damage when spikes are fitted, do not drag the speaker and take care to place it where it cannot cause damage or pierce mains cables etc. Used properly, spike feet will not damage carpets.
- The stand is pre-tensioned to precise torque. Check with your retailer if you have any questions regarding this.
- To clean use a lightly dampened cloth. Do not use abrasive cleaners or cleaners containing solvents.
- Do not use close to a strong heat source – radiators, heaters or electrical equipment. Do not expose the stands to excessive cold, heat, humidity or sunlight.
- This product contains small items that could be a choking hazard if swallowed.
- Do not overtighten the fixings.
- For speaker setup and placement, refer to the full speaker manual.
INSTALLATION
Specifications
- Weight and dimensions (per stand) Weight
- Dimensions (W x H x D) 2.28 kg (5.0 pounds)
286 x 638 x 338mm (11.26 x 25.12 x 13.31 Inches)
Warranty
Q Acoustics passive loudspeaker products are warranted free of defects in
materials and workmanship for a period of 5 years from the date of purchase.
During the warranty period Q Acoustics will, at its option, repair or replace
any product found to be faulty after inspection by the company or its
appointed distributor or agent.
Misuse and fair wear and tear are not covered by warranty.
Goods for repair should in the first instance be returned to the supplying
dealer. If this is not possible contact Q Acoustics or their appointed
distributor for your area to determine the correct warranty procedure. If
possible the original packaging should be used to return the product as damage
sustained during transit to the repair center is not covered by the warranty.
The warranty does not in any way affect your legal rights.
For service information contact:
support@qacoustics.co.uk
Q Acoustics
Woodside 2, Dunmow Road Bishops Stortford, Herts, UK CM23 5RG
For any additional info not contained within this manual, support questions
and/or requests, please visit our online Knowledge Base Portal at
www.qacoustics.co.uk/faqs
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>