DENVER SHP-100 Power Monitoring Plus User Manual
- June 17, 2024
- Denver
Table of Contents
DENVER SHP-100 Power Monitoring Plus
Specifications
- Product Name: DENVER SHP-100 Power Plug
- Manufacturer: Denver Electronics
- Website: www.denver-electronics.com
Product Usage Instructions
Get started
Follow the steps below to set up your DENVER SHP-100 power plug:
- Ensure the power plug is connected to a power source.
- Download and install the app associated with the power plug from the app store.
- Open the app and create an account if necessary.
- Choose the method to add the power plug to your system:
- EZ mode: This is the easiest method. Follow the in-app instructions to add the power plug to your system.
- AP mode: If you encounter any issues with EZ mode, the app will guide you through AP mode. Simply follow the in-app instructions.
Daily use
Once the power plug is successfully added to your system, follow these
steps for daily use:
- Open the app and navigate to your home screen.
- Locate the power plug and tap on it to access the power plug page.
- On the power plug page, you can perform the following actions:
- Turn on or off the power plug.
- Create timers for automated operations.
- Explore other available features within the app.
Amazon Alexa & Google assistant
The DENVER SHP-100 power plug is compatible with Amazon Alexa and Google
Assistant. Follow the device-specific instructions to integrate the power plug
with your voice assistant:
- For Amazon Alexa: Refer to the Alexa user manual or support documentation for instructions on how to add and control the power plug using Alexa.
- For Google Assistant: Consult the Google Assistant user guide or support resources for guidance on adding and managing the power plug with Google Assistant.
FAQ (Frequently Asked Questions)
-
Q: Can I reset the power plug to factory settings?
A: Yes, you can restore the DENVER SHP-100 power plug to its factory settings by pressing and holding the On/Off button for a long time. This will reset all configurations and preferences. -
Q: Where can I find the latest version of the user manual?
A: The latest version of the user manual can be found on the Denver Electronics website at https://manual-hub.com/. -
Q: Are there any limitations or changes to the product?
A: Yes, please note that all products are subject to change without notice. Denver Electronics reserves the right to make modifications, improvements, and corrections without prior notification. Please refer to the user manual for the most up-to-date information.
User Manual
DENVER SHP-100 power plug
Get started
- Download the app called “DENVER SMART HOME” on your smart phone. It is available on Appstore and Google play.
- The app will ask you to register a user. Please do this by using your mobile number or email address, and then log into the app. You will be asked to create a “family”. This is to make it easy to have several systems in the app at the same time.
- Now you need to add the power plug to the app.
- First, connect it to your power outlet and turn this on. Then press the on/of button for 5 seconds until the indicator flashes quickly.
- Push “Add Device” or + in top of app, and choose “socket”, and follow on screen instructions. It will guide you through the whole setup.
- Now the power plug is connected and you can make timers, countdown timers, different automatisations etc. within the app.
- Please notice, there are two ways to add the power plug to your system. EZ mode and AP mode. EZ mode are the easiest, but if you have problems using that, the app will guide you through the AP mode instead. In this case, just follow the in-app instructions.
Daily use
In your home screen of the app you can now find your power plug. Push this and you will get to power plug page. Here you can turn on, turn off, make timers etc.
Amazon Alexa & Google assistant
It is possible to use the power plug with Amazon Alexa & Google assistant. Use
the app to add this function. Instructions are shown in the app. You can also
find the full manual in English on our website. Please enter www.denver-
electronics.com and use the search
function to find SHP-100.
If you by any means need to reset the power plug, this is done by pushing the
on/off button 5 seconds. Now you can set it up from start again.
- Input Voltage: AC 230V/50Hz
- Output: 16A Maximum 3680W
- Wireless Type: 2.4GHz
- App Support: iOS/Android
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
- Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
- Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
- All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
- Hereby, Inter Sales A/S declares that the radio equipment type SHP-100 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: SHP-100. Now enter product page, and red directive is found under downloads/other downloads.
- Operating Frequency Range: 2412 ~ 2472
- MHz Max Output Power : 3680W
DENVER ELECTRONICS A/S
- Omega 5A, Soeften
- DK-8382 Hinnerup
- Denmark
- www.facebook.com/denverelectronics
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>