Zowill KJDK01-L Fingerprint Door Lock Instruction Manual
- June 14, 2024
- Zowill
Table of Contents
Installation Instructions of Lever
KJDK01-L Fingerprint Door Lock
Thank you fo purchasing aur products. Please review this manual thoroughly baforo operatng your dovice, Al pictures i this manual are fo istration purpos only. Actual procuct may vary us to product upgrace.
Parts list
TOOL REQUIRED
Do not use an electric screwdriver during installation.
Prepare the door and check dimensions
If your door already has the holes shown in the picture below, proceed to the next step, if your door does not have holes, use the mounting template to drill a new hole.
Latch backset adjustment
Backset is the distance from the door edge to the center of the hole in the
door.
The latch is provided with adjustable design which can fit either 2-3/8″(60mm)
or 2-3/4”(70mm) backset
A. If the backset of your door is 2-3/8″(60mm), no need to adjust the latch.
B If the backset of your door is 2-3/4″(70mm), please adjust the latch.
Install latch and strike
IMPORTANT :
The latch should be aligned with the : chiseled properly.
IMPORTANT :
Make sure the hole in door frame is drilled a minimum of i 1° (25mm) deep.
Install front and rear lever
Install handle lever
Test the handle set after installation.
Keep the door open, retract the latch by pressing knob from outside and
pushing the lever from inside of the door to test if the Handleset works
smoothly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>