ERYUE OY631 Single Ear Headset User Manual
- June 15, 2024
- ERYUE
Table of Contents
ERYUE OY631 Single Ear Headset
Product Usage Instructions
Section 1: Setup and Installation
- Unpack the product and ensure all components are included.
- Choose a suitable location for the product.
- Connect the power input to an appropriate power source.
- Follow the manufacturer’s instructions for any additional setup steps.
Section 2: Operating the Product
- Ensure the product is powered on.
- Use the control panel or remote control to navigate the menu options.
- Adjust the settings according to your preferences.
- Refer to the user manual for specific instructions on using different features.
Section 3: Maintenance and Care
To keep your product in optimal condition, follow these guidelines:
- Regularly clean the product using a soft cloth and mild cleaning solution.
- Avoid exposing the product to extreme temperatures or moisture.
- Do not attempt to disassemble or repair the product yourself. Contact customer support for assistance.
Frequently Asked Questions
- Q: Can I modify the product?
- A: No, any changes or modifications not explicitly approved by the manufacturer may void your warranty and authority to operate the equipment.
- Q: Does the product comply with FCC rules?
- A: Yes, this device complies with part 15 of the FCC Rules. It may not cause harmful interference and must accept any interference received.
Specifications
- Frequency Range: 2.402GHZ~2.480GHZ
- Working distance: 10m
- Pairing name: Wireless headset
- Compatible protocol: A2DP/AVRCP/HSP/HFP
- Working voltage: 3.7V
- Battery capacity: 300mAh
- Charging time: 1~2Hours
- Earphone listening time: 2-10hours
- Specifications of the loudspeaker: 40mm,32Ω,20mW
- Sensitivity: 108dB±3dB
- Frequency response range: 20~20KHz
- Microphone sensitivity: Omnidirectional – 42 dBV
- Microphone impedance: 1KΩ
- Microphone response frequency: 10-28000Hz
- Compatible system: IOS, Android, Mac OS, Windows
- Charging line: USB~Type-C
Tips
- Please turn off the power when not using this product.
- Do not place this product in a liquid or wet place.
- Do not use this product in a fire to avoid an explosion.
- Do not remove or damage the internal battery or put it into the fire, Place in containers according to environmental requirements when discarding.
Maintenance
- During use, the charging wire, plug, housing and Check whether other parts are damaged.
- If any, stop using it until It is well repaired.
Warning
- This product must be used under the direct supervision of adults.
- This product contains small parts. Please do not disassemble or swallow it in private to avoid accidental danger. It is not suitable for children aged 3 and below.
- This manual contains important information and must be retained!
warranty
warranty card
- User Name……………………………………………………………….
- postal address…………………………………………………………..
- contact number…………………………………………………………
- Product name and model……………………………………………
- Shop name………………………………………………………………..
Warranty terms
- The goods are guaranteed for 12 months from the date of sale.
- The warranty service is only valid under normal use.
- All external damages, such as manual damage, self-sealing, improper use, etc Within the warranty period, this card must be provided during the warranty period, and this card cannot be provided or altered, The company has the right to cancel the warranty.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>