DENVER DVB C MPEG Digital Free to Cable TV Channel USB Port User Manual
- June 17, 2024
- Denver
Table of Contents
DENVER DVB C MPEG Digital Free to Cable TV Channel USB Port
dvb-c mpeg-4 hd tv-tuner for digital free to cable tv channels usb port
with pvr
DENVER DVBC-120
Important safety instructions to be kept with the product
Please read attentively
To prevent fire and electric shock, do not expose this receiver to rain or moisture. In order to avoid any possible risk of electric shock, never attempt to open the unit. In case of breakdown, reparation should be made by qualified technicians. No part of this unit should be repaired by users.
WARNING!
- Presence of dangerous tension inside apparatus! Do not open. Risk of electric shock! No part should be repaired by users. The maintenance of the receiver should be carried out exclusively by qualified persons.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its after-sales service, qualified electrician or persons of similar qualification in order to avoid possible danger.
- The product must be installed in accordance with national regulations.
- The used batteries must be disposed of safely. Throw them in collection bins provided is prohibited (inquire after your retailer for more details) in order to protect the environment.
Proper Installation
- Place the receiver on a flat, firm and stable surface. Do not put it on a carpet or rug.
- Do not place the receiver on top of another device, such as an amplifier. This may lead to overheating.
- Do not put anything above the unit (for example, CDs or magazines).
Sufficient Ventilation
- Place the receiver in a well-ventilated location to prevent accumulation of internal heat. Allow a gap of at least 10cm to the rear and the top of the unit, as well as a space of 5cm to both sides to avoid overheating.
- Do not obstruct any ventilation openings with items such as newspapers, tablecloths, curtains, etc.
Protecting the Receiver from High Temperatures, Humidity, Water and Dust
- The receiver should not be exposed to dripping water or splashing.
- No objects filled with liquids, such as vases, shall be placed on the unit.
- Do not place any objects that might damage your unit near it (e.g. liquid filled objects or candles)
- Do not place any source of flames such as lit candles on the receiver.
- This receiver is to be used in a temperate climate and should not be used in a tropical
Electricity Supply
- Please unplug the receiver in case of prolonged non-use.
- If the power cord is damaged, it must be replaced or repaired by the manufacturer, its after-sales service, qualified electrician or similar qualifications to those to avoid possible danger.
- This device must be connected to a 230V ~ 50Hz electrical network.
- The plug must remain readily accessible after the installation of the product.
Welcome Section
Congratulations on choosing to buy a DENVER product. By doing so you now have
the assurance and peace of mind that comes with purchasing a product made by
one of the leading manufactory.
Main features
- Slim size (168mm) MPEG-2,
- MPEG-4(H.264) decoding
- USB2.0 for software update, music ,image, movie and recording
- LCN(Logical Channel Number) supported;
- Parental control
- Favorite lists
- Timer
- EPG/TXT/SUBTITLE supported
- Digital sound through COAXIAL output (S/PDIF)
- PVR ready supported
Automatic Standby : the STB preset to automatically switch from active mode into standby if 3 hours no interaction and/or channel change from user, with alert message 2 minutes before going into standby. User can choose OFF (turn off this function) or other hours.
FAQ – DENVER DVB-C
Congratulations with your digital cable-tv tuner. With this set top box you
can enjoy digital TV signal, and get HD channels in full quality.
To get a proper signal you need good cables with proper connectors and
assembling. If you don’t have this, it can be hard to receive proper signal.
This is why it is important to check your cables. Bad assembling and bad
quality of assembling’s can do so that you don’t get signal at all, or in best
case pixelating channels.
Check your cables.
If possible, the DVB-C box shall be connected directly to the input connector
of the house. And you should maximum use 10 meter cables. If you put more
cables in a row (with connectors), you risk to loose a lot of signal, so use
one long cable instead of several with connectors.
It is also important to use double shielded cables, and preferable of the type
with mounted connectors.
- If you need to split the signal to more than one tv, it is best to do this after the box is connected. OR best of all use a connector box with F-connectors. And not the T-pieces that you use as normal antenna plug.
- Please make sure not to make sharp turns on the cable. You risk to damage the inside of the cable this way.
If you follow these rules, you will get digital cable tv in super quality.
Please notice that in some houses it might be necessary to use a signal
amplifier. If you use this, make sure it is made for digital cable tv, and has
the proper shielding. It might be a good idea to ask you tv provider what
amplifier they suggest.
Installation of STB
Front Panel
- Power : Switch between Standby mode and active mode.
- on/off : Power lamp, red color in Standby mode, green color in active mode
- IR sensor : Receives the remote control signal.
- CH+/CH -: Switch channel
- USB
Rear Panel
-
Cable IN
Connect cable signal. -
LOOP OUT
Connect to TV. -
USB
It is used for playing wma,m4a, aac, JPEG,BMP,PNG,AVI, XVID,MKV and USB PVR(USB stickers, mobile HDD with external power supply and FAT32 format).
USB hard disc on products with PVR function : Please notice that we recommend using a hard disc with OWN power supply on this unit. This is to ensure that it has enough power to work properly. You can buy many hard discs without power supply, but our experience is that they need too much power to work stable. MAXIMUM power for hard discs without power supply is 500mAh.. If they use more than this, they will fail when recording. -
HDMI
Connecting to the HDMI input on the TV set. -
COAXIAL
Digital audio signal output, It is Coaxial output -
TV SCART
Connector Connect your receiver to your TV Scart port using a SCART cable. -
DC IN
Connection
Note : Before connect this STB to other devices, please close all
devices’ power.
Connecting to cable signal
To receive the broadcast signal, the cable signal should be connected to the
CABLE IN connector at the back of the receiver.
Connecting to TV
- Connect the HDMI connector of the receiver to the HDMI connector of TV set.
- Connect the TV Scart connector of the receiver to the Scart connector of TV set.
Connecting to Digital Audio Amplifier
Connect S/PDIF( COAXIAL) connector of your receiver to digital audio input of
your amplifier.
Remote
- STANDBY : Switch The Standby Mode
- EPG : Electronic Program Guide
- INFO : Show The Current Program Information
- AUDIO : Choose Audio language Or Audio Mode
- FAV : Enter Favorite List
- MENU : Enter The Main Menu
- CH+: Change Channel+
- V+/-: Change Vol
- CH -: Change Channel-
- P+: Page Up
- Number(0~9):Select A Channel Or Setting
- REV : Return
- FWD : Forward
- Play/Pause
- MUTE : Mute Or Restore Audio Output
- PVR : Personal Video Recording
- SUBTITLE : Select Subtitle Language
- Exit : Exit The Current Menu
- 0K
- P-: Page Down
- RECALL : Return To Last Playing Program Or Last Operation
- Go To
- Next
- PRVE : Return To Last Page
- REC : Record Program
- Stop
- 28.29.30.Multi-Function Key
Installation Guide
After all connections have been made properly, switch on TV and make sure the receiver is connected to the Main Power. Press Power button to switch receiver on. If you are using the receiver for the first time or restored to Factory Default, the Main Menu will appear on your TV screen.
- Select [OSD Language] and press RIGHT/LEFT key to select an language
- Select provider and press right/lift to select provider
- Once channel tuning is complete, you are now ready to watch TV
Basic Operation
Program Organizer
To access the Menu, press the MENU button and select [Program organizer]. The
Menu provides options to adjust the Program Manage Settings. Press the EXIT
button to exit the Menu
Channel Manager
To edit your program preferences (lock, skip, favourites, move or delete), you
will need to enter the Program Edit Menu. This Menu requires a password to
access.
Channel sort
-
Sort your channels from the following options:
[ LCN ] – Sort the channels in ascending order
[ ONID ]-Sort the channels according to the original network
[ Service Name ] – Sort the channels in alphabetical order
[ Service ID ] – Sort the channels according to the station -
LCN (Logical channel number)
Set LCN on or off.
Installation Guide
To access the menu, press MENU and select [Install Guide]. The Menu provides
options to adjust the Channel Search settings. Select an option and press OK
or RIGHT to the setting page. Press EXIT to exit the Menu.
Search Setup Country
Setup an country that it determine the time region.
Auto Search
Search and install all channels automatically. This option overwrites all
preset channels.
- Input the symbol.
- Press LEFT or RIGHT key to select QAM and search mode.
- Press OK to start searching channels
Manual Search
Install new channels manually. This option adds new channels without changing
the current channels list.
- Select [Manual Search] then press OK or RIGHT. The channel search screen will appear.
- Input the frequency and symbol.
- Press LEFT or RIGHT key to select QAM and search mode.
- Press OK to start searching channels If a channel is found, it is saved and added to the channels list. If channels can t be found, and then exit the menu.
Net Work Search
You can search channels by net work. Input the local Network ID which your
program provider provides.
System Setup
To access the menu, press MENU and select [System setup]. The menu provides
options to adjust the system settings. Press the UP/DOWN key to select an
option and press OK to enter the setting page. Press EXIT to exit the Menu.
Language Setting
You can set menu language that was the OSD language. You can set the audio
language that was the default choice when the program has multi-audio.
You can set the subtitle language that was the default choice when the program
has multi-subtitle
OSD setting
You can set the OSD transparent and infobar show time.
TV Setting
-
TV mode
If the video does not appear correctly, you need to change the settings.
This should match the most common setting for TVs in your country.
[ NTSC ]: for NTSC system TV.
[ PAL ]: for PAL system TV. -
Aspect
You must set the display format to 4:3 Pan& Scan, 4:3 Letter Box, 16:9 Wide Screen or Auto to get the maximum display when watching TV. -
Video Resolution
If the video does not appear correctly, change the setting. This setting is to match the most common setting for HDMI.
( 576i ): for PAL system TV.
[ 576P ): for PAL system TV.
[ 720P_50 ]: for PAL system TV
[ 720P_60 ]:for NTSC system TV
[ 10801_25 ]:for PAL system TV
[10801_30 ]: for NTSC system TV
[ 10801 ]: for NTSC or PAL system TV.
Audio Setting
It control the Digital Audio Amplifier output.
Time Setting
This menu provides options to adjust the time settings. Press UP/DOWN to
select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to
exit the menu.
-
Time offset
Select auto or manual for GMT offset adjustments. -
Time Zone
Select the Time Zone Offset when [Time Offset) is set to Manual.
Auto Standby
Select the Sleep time. The machine will automatic switch off after 3 hours
without user activity.
Parental Lock
You can restrict access to channels that are unsuitable for children. To
restrict/lock the channel you will need to enter either the default password
‘0000 or your own password.
Restore Factory
Default Reset your Set Top Box to the Default Factory Settings. In Main Menu
select [Restore Factory Default] and press OK or RIGHT to select. press OK to
confirm. This option will delete all preset channels and settings.
Tools
To access the menu, press MENU and select [Tools]. The menu provides options
to adjust the system settings. Press the UP/DOWN key to select an option and
press OK to enter the setting page. Press EXIT to exit the Menu.
-
Information
View model, hardware and software information. -
USB Upgrade
It support the upgrade the software when choose the right file which the manufacture provide -
Remove USB device
Remove the USB device safely.
Timers
In this menu, you can select the channel number which you want to record, set
the start date, start time, end time and select the repeat mode(Once, Daily ),
then set the mode to Record, press Ok to save the timer. This channel will be
recorded
Record
This menu contains video list ,USB device information, Record setup and remove
USB device (the the usb device is interred, this option would be appear)
Video list : you can see PVR.
USB device information :You can format the usb device to FAT32 or NTFS
Record setup : you can view record device information
Media player
You can play music, view the photo, see the movie.
Multimedia player feature also has been integrated on the receiver. You could
show your preference photo, playing music and movie on multimedia player.
Known supported file were illustration below. FAT32 and FAT16 file system
could be supported at the moment.
Photo Configure
You can set Slide Time, Slide Mode and Aspect Ration
Movie Configure
In this menu, you can set Subtitle Specific, Subtitle BG and Subtitle Font
color..
Audio key
The program might have multilingual audio language and the audio broadcast on
different audio mode such as Stereo, Left or Right. All the available audio
languages will display on the audio track windows while you press AUDIO key.
The screenshot is illustrated below. If there is no audio output after you
select the audio language, it indicates that there is no audio on the current
audio mode, so you have to select preferable audio mode.
TV Channel and radio Channel list
Press OK key to display all TV channel Press TV/Radio to watch Radio channel.
Follow the help information at the bottom of the window to select preference
channel.
Other functions introduction
Program information
If you press the INFO button once, a banner is displayed on the upper part of
the screen, and if you press the button again before the upper banner is
disappeared, the banner will show the details of the currents channel.
Favorite List
If you press “FAV” on the remote controller at No menu state, the favorite
group list will be displayed on the screen. You can select one favorite group
and press “OK” key to enter the favorite channel list
EPG (Electronic program guide)
The EPG is an on-screen TV guide that shows scheduled programs seven days in
advance for every tuned channel. Press the EPG button on the Remote Control to
access guide. When entering EPG for the first time on a channel it can take up
to 2 minutes before EPG is fully shown. If you change channels, the 2-minute
loading time can be starting over again. This is not an error, but a normal
waiting time for the EPG to load”.
You can use the UP/DOWN key to select the preferred program and press color key to change time that view event. Press “OK” key, you can view or record program by timer
Troubleshooting
No picture or sound| Wrong connection of the Audio/ Video output of the
receiver to TV. Audio muting. TV power off.| Connect the Audio/ Video output
of the receiver to TV correctly. Press the MUTE button Turn TV on.
---|---|---
No picture| The receiver can’t receive the signal Incorrect values of some
tuner parameters Wrong direction of the antenna.| Check the antenna cable,
replace the cable, or connect the cable to the receiver tightly. Set the
values of the tuner parameters correctly in the installation menu. Check the
antenna connect.
The remote control does not work| The batteries of the remote control are not
inserted or exhausted| Check whether the batteries are inserted correctly in
your remote control. Check the batteries, and if exhausted replace the
batteries in the remote control.
There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact the dealer. Don’t open the receiver cover. This may cause
Tips : If you refer to this troubleshooting, but no resolve that problem you encountered. Please you contact the local dealer or technical support instantly, don’t to discover the machine, because that do is very danger, and it damage that machine in that cases.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
www.denver-electronics.com
- Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
- Electric and electronic equipment is marked with the crossed out trash can symbol, seen below. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
- All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
- Hereby, Inter Sales A/S declares that the radio equipment type DVBC-120 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com and then click the search ICON on topline of website. Write model number: dvbc-120
Now enter product page, and red directive is found under downloads/other downloads.
- Operating Frequency Range : 143-786MHz
- Max Output Power : 10W
- DENVER ELECTRONICS A/S
- Omega 5A, Soften
- DK-8382 Hinnerup
- Denmark
- facebook. com/denverelectronics
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>