NEXO Under L15 Rigging System Instruction Manual
- June 17, 2024
- NEXO
Table of Contents
**NEXO Under L15 Rigging System Instruction Manual
**
Contents
Dimensions
For fixation, you have the choice between M8 and M10 (Fastener not provided)
WARNINGS
Ensure that the mounting location and fasteners can support at least 4 times
the weight of all the installed cabinets, auxiliary equipment and cables. Use
only the provided screws (thread lock coated) and accessories.
Mounting of the L15
Prepare the Main plates by screwing the M10x30 screws on the outer holes, do not tighten completely and leave at least 6mm. Assemble the Plates on each side of L15 using the M10x16 screws.
Place the assembly below the ceiling plate.
Tighten the outer screws. Secure with the 2 provided M10x30 screws.
Mounting a second L15: Use M10x16 screws
**CARDIO mode
OMNI Mode
**
Mounting a P12 :
Standard inclinations :
- EXO cannot accept responsibility for accidents caused by any factor other than defects in this product itself.
- Please check the web site nexo-sa.com for the latest update.
Read this docum ent before using.
Keep this docum ent.
Observe all warnings and caut ions
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>