Panasonic KX-TGA930 Digital Cordless Phone Instruction Manual

Additional Digital Cordless Handset
Model No. KX-TGA930
Installation Manual
DECT 6.0

KX-TGA930 Digital Cordless Phone

Thank you for purchasing a Panasonic digital cordless phone.
This unit is an additional handset compatible with the following series of Panasonic Digital Cordless Phones:
KX-TG6311/KX-TG6321/KX-TG9331/KX-TG9341/ KX-TG9361/KX-TG9371/KX-TH1211
You must register this handset with your base unit before it can be used. This installation manual describes only the steps needed to register and begin using the handset. Please read the base unit’s operating instructions for further details.
Charge the batteries for about 7 hours before initial use.
Please read this installation manual before using the unit and save it for future reference.
For assistance, visit our website:
http://www.panasonic.com/helpfor customers in the U.S.A. or Puerto Rico. PNQX1006ZA DM0208PY0

Supplied accessories

1 Please read the base unit’s operating instructions for replacement battery information.
2 The handset cover comes attached to the handset.
Note:

• Please read the base unit’s operating instructions for additional/ replacement accessories.

Sales and support information

• To order additional/replacement accessories, call 1-800-332-5368.
• TTY users (hearing or speech impaired users) can call 1-866-605-1277.

Connection Note:

• Use only the supplied Panasonic AC adaptor PQLV209.

2. For assistance, please visit http://www.panasonic.com/help

• The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

Battery installation and battery charge
Important:

• Use the supplied rechargeable batteries (Part No. HHR-65AAABU).

• When installing the batteries:
  – Wipe the battery ends ( ) with a dry cloth.
  – Avoid touching the battery ends ( ) or the unit contacts.
  – Ensure correct polarities ( ).

• When replacing the batteries:
  – USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
  – Do NOT use Alkaline/Manganese/Ni-Cd batteries.
  – We recommend using the Panasonic rechargeable batteries noted in the base unit’s operating instructions for replacement battery information.

1. Press the notch on the handset cover firmly, and slide it in the direction of the arrow.
2. Insert the batteries negative ( ) end first. Close the handset cover.
3. Place the handset on the charger for about 7 hours before initial use.

Note:
L If the batteries are fully charged, but the operating time seems to be shorter, clean the battery ends ( ) and the charge contacts with a dry cloth.
Attention: A nickel metal hydride battery that is recyclable powers the product you have purchased.
Please call 1-800-8-BATTERY (1800-822-8837) for information on how to recycle this battery.
Registering a handset to a base unit

1. Base unit:
   KX-TG6311/KX-TG9361/KX-TH1211
   Press and hold [LOCATOR] for 4 seconds. (No registration tone)
   KX-TG6321/KX-TG9331/KX-TG9341/KX-TG9371
   Press and hold {LOCATOR} for 4 seconds until the registration tone sounds.
   • If all registered handsets start ringing, press the same button to stop. Then repeat this step.
   • The next step should be completed within 90 seconds.

2. Handset:
   Press [OK], then wait until a long beep sounds.
   Note:
   • While registering, “Base registering” is displayed on all registered handsets.
   • If “Error!!” is displayed while registering, press [OFF] and register the handset again.

Display language

1. 2. : Select the desired setting.
2. Press the right soft key to save. → [OFF]

Wall mounting

1. Drive the screws (not included) into the wall.
2. Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.

Belt clip
You can hang the handset on your belt or pocket using the supplied belt clip.
• To attach the belt clip • To remove the belt clip

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.
WARNING
Power connection

• Completely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.
• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.
• Unplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact the Panasonic Call Center at 1-800-211- PANA (1-800-211-7262).

Installation

• To prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.
• Do not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

CAUTION
Installation and relocation

• The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near the product and is easily accessible.

Battery

• We recommend using the supplied batteries or additional/replacement batteries noted in the base unit’s operating instructions for replacement battery information. USE ONLY rechargeable Ni-MH batteries AAA (R03) size.
• Do not mix old and new batteries.
• Do not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte may be toxic if swallowed.
• Exercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.
• Charge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.
• Only use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Other information

• Operating the product near electrical appliances may cause interference. Move away from the electrical appliances.
• Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

Routine care

• Wipe the outer surface of the product with a soft moist cloth.
• Do not use benzine, thinner, or any abrasive powder.

Notice for product disposal, transfer, or return

• This product can store your private/confidential information. To protect your privacy/confidentiality, we recommend that you erase the information such as phonebook or caller list entries from the memory before you dispose of, transfer, or return the product.

FCC and other information

This equipment is hearing aid compatible as defined by the FCC in 47 CFR Section 68.316.
When you hold the phone to your ear, noise might be heard in your Hearing Aid. Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices.
WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS:

1. Remain on the line and briefly explain to the dispatcher the reason for the call.
2. Perform such activities in the off-peak hours, such as early morning or late evenings.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Privacy of communications may not be ensured when using this phone.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Warning:

• This product complies with FCC radiation exposure limits set forth for an uncontrolled environment.
• This handset may not be collocated or operated in conjunction with any other antenna or transmitter.
• The handset may be carried and operated with only the specific provided belt-clip. Other non-tested belt-clips or similar body-worn accessories may not comply and must be avoided.

Notice

• FCC ID can be found inside the battery compartment or on the bottom of the unit.

Notice

• This product is designed for use in the United States of America. Sale or use of this product in other countries may violate local laws.

If you need assistance with setup or operation

1. Visit our website: http://www.panasonic.com/help
2. Contact us via the web at: http://www.panasonic.com/contactinfo
3. Call us at: 1-800-211-PANA (1-800-211-7262)
   TTY users (hearing or speech impaired users) can call 1-877-8338855.

When you ship the product

• Carefully pack your unit, preferably in the original carton.
• Attach a letter, detailing the symptom.
• Send the unit to PSTC (Panasonic) Exchange Center, prepaid and adequately insured.
• Do not send your unit to Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.

Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Puerto Rico, Inc.
San Gabriel Industrial Park, Ave. 65 de Infantería, Km. 9.5, Carolina, Puerto Rico 00985
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd.,
and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
© 2008 Panasonic Communications Co., Ltd. All Rights Reserved.
For assistance, please visit http://www.panasonic.com/help

https://manual-hub.com/

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>