dji AeroScope Offline Update User Guide
- June 17, 2024
- DJi
Table of Contents
dji AeroScope Offline Update
Guide to Updating Firmware for DJI Aeroscope
This document provides step-by-step instructions on how to update the firmware for the DJI Aeroscope system. Follow each step carefully to ensure a successful update.
Instructions
Step-by-Step Instructions
- Download the firmware package for DJI Aeroscope from the DJI Download Center.
- Ensure that the DJI Aeroscope system is connected to a stable power supply before proceeding.
- Connect your computer to the Aeroscope system using the appropriate network settings and configurations.
- Launch DJI Assistant 2 for Aeroscope on your computer.
- Once the DJI Assistant 2 for Aeroscope is running, select the ‘Offline Upgrade’ option from the menu.
- Locate the downloaded firmware package on your computer and begin the upgrade process by following the on-screen instructions.
Firmware Upgrade Notifications
When the firmware is updated successfully, a prompt will appear, confirming the update is completed. If the update fails, restart DJI Assistant 2 for Aeroscope and try again.
Specifications
| Parameter | Description |
|---|---|
| Firmware Version | Refer to the DJI Download Center for the current version |
| System Requirements | Stable power supply and network connection |
| Upgrade Tool | DJI Assistant 2 for Aeroscope |
FAQs
- What should I do if the firmware update fails?
- If the firmware update fails, restart DJI Assistant 2 for Aeroscope and attempt the upgrade process again.
- Is it necessary to connect the DJI Aeroscope to power during the update?
- Yes, ensure the DJI Aeroscope system is connected to a stable power supply to prevent any interruptions during the firmware update process.
DJI AeroScope Offline Update Guide
The firmware version of DJI AeroScope Stationary Unit and DJI AeroScope Mobile can be updated using a special version of DJI Assistant 2 for AeroScope. Follow the instructions below to update the firmware using DJI Assistant 2.
- Go to the official DJI Download page of AeroScope and download the latest offline firmware package on your computer.
- Go to the link below and download the DJI Assistant 2 for AeroScope software package on your computer.
- Link: https://pan-sec.djicorp.com/s/Yc52tacxxXBZQaw
- The official version of DJI Assistant 2 for AeroScope on the DJI website does not support the offline firmware update.
- Install and run DJI Assistant 2 for AeroScope on your computer.
- Connect your computer and the AeroScope unit using an Ethernet cable. The corresponding device icon of the AeroScope unit will be displayed when connected. If the assistant software cannot recognize the AeroScope unit, restart your computer, disable the wireless network, and close the firewall software before running the assistant software again.
- Select the device icon and click on Offline Upgrade. Select the downloaded offline firmware package in step one, and click Start Upgrade to update.
- When the firmware is updated successfully a prompt will appear, confirming the update is completed. If the update fails, restart DJI Assistant 2 for AeroScope and try again.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>