EMEET C960 4K Webcam for PC User Guide
- May 15, 2024
- eMeet
Table of Contents
EMEET SmartCam C960 4K
Quick Start Guide
How to Install the Webcam
-
Install it on a monitor/laptop
Install the we beam on a monitor or laptop at the desired position or angle, and ensure they fit snugly and firmly.
-
Install it on a tripod
Install the webcam on a tripod using the 1/4″ tripod thread at its base.
*Tripods are sold separately.
How to Connect the Webcam to Computer
Connect the USB port of the webcam to the computer.
How to Use the Webcam
When the Webcam is used by Zoom, Skype, or other video calling software, the
LED indicator will light up, indicating that the camera is working.
Please select EMEET camera in [Settings] – [Video] – [Cameras] of the software
if the indicator is not on.
How to Use the Microphone
Select EMEET microphone in [Settings) – [Audio] – [Microphones] of the software.
How to Use EMEETLINK
- To use EMEETLINK, please download it from www.emeet.com/EMEETLINK first.
- To fix image flickers, click [Device] page. If you see flickering images, you can switch between 50Hz and 60Hz, two common power line frequencies in different countries or regions, to try fixing the images.
EMEET Two(2) Year Limited Warranty
Limited Two(2) Year Warranty with EJMEET proof of purchase. The warranty does
not cover normal wear and tear or damage caused by accidents or misuse. To
protect your rights, please keep the proof of pur- chase. For service, please
contact us:
****www.emeet.com
Safety Guide
Caution: To avoid electrical shock, do not open the housing of this product.
In addition, users do not need to use the product’s internal parts. To repair
the product, please contact qualified maintenance personnel or mail the
product to our after-sales department.
- Please read this guide carefully.
- Please observe all warnings.
- Please keep this guide.
- Please follow all instructions.
- When cleaning this product, use a dry cloth only.
- Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
- Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat.
- Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
- Do not submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surfing.
- Please protect the USB cable. Do not step on or apply pressure on them. Do not pull on the product’s plug, socket, or cable outlet.
- lt is recommended that users use the accessories that have been specified by the vendor.
- When not using the webcam, please unplug the device from the USB port and turned off the power.
- To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, ifthepower cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product; the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen.
EU/UKCA Compliance:
Hereby, SHENZHEN EMEETTECHNOLOGY CO., LTD. Corporation declares that the
equipment is in compliance with <Directive 2014/30/EU /EMCR 2016 (S.I.
2016/1091)>.
The suitable temperature for the product and accessories is 0-40C.
Due to the used enclosure material, the product shall only be connected to a
USB Interface of version 2.0 or higher.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received,including interference that may cause undesired operation.
NOTE : The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
ISED Canada compliance: This Class B digital apparatus complies with Canadian
ICES-003.
UK REP: Obelisk UK Ltd, Sanford Gate, Oxford, OX4 6LB, UK
Manufacturer
EAR
GR www.emeet.com
For more information, please visit www.emeet.com.
Copyright© Shenzhen EMEET Technology Co ,Ltd. Please visit
www.emeet.com to check the latest version of the
information contained in this manual