SWIT MATRIX-S8 Chanel Charger User Manual
- June 17, 2024
- SWIT
Table of Contents
SWIT MATRIX-S8 Chanel Charger
Thank you for choosing SWIT products. Please read the instructions before using, and keep it for future reference.
Warning: Remember the following precautions to avoid the risk of fire or electric shock!
- Do not allow the charger to come into contact with rain or leave it in a damp place.
- Do not dismantle the charger yourself, and repairs should only be carried out by qualified personnel.
- Do not touch the inside of the charger with metal, conductive objects.
- Do not use any metal objects to short the charging channel terminals.
- Do not connect to a power supply that exceeds the voltage range of the product.
Notice
- Charging is restricted to SWIT batteries only, charging other brands of batteries may be dangerous due to incompatibility.
- Keep the electrodes of the battery and charger clean and ensure reliable contact.
- It is normal for the charger to get warm during charging.
- Do not cover the cooling air ducts.
- Do not place the charger in an unstable place and ensure that the screws are locked as tightly as possible when mounting, this product can be seriously damaged by dropping it.
- Please use the original factory standard AC power cable to avoid damage to the unit.
Product Features
- With intelligent recognition of fast-charging and non-fast-charging batteries, the MATRIX-S/A8 can support up to eight simultaneous 6A charges.
- MATRIX-S/B8 automatically recognizes SWIT 14.4V and 28.8V batteries and adapts to the charging voltage.
- Real-time monitoring of the current state of the battery and intelligent adjustment of the charging current, make charging more efficient.
- Eight individual LEDs for clear indication of battery charge status.
- Comprehensive temperature, voltage, and current protection for safe and reliable use.
- It can be used in a variety of scenarios, including wall-mounted, shelf-mounted, and flat.
Appearance
- Bollards
- LED indicator light
- LCD screen
- Charger hanger
- Anti-dislodging M4 threaded hole
- Twisting hand
- Cooling fans
- AC power socket
- Charger switch
Charging and Display Function
Charging status indicator
Display:
Charging in progress
- The charger is ready to start charging.
- After mounting the battery, it prompts for the battery capacity and the number of cycles displays 5s, and then enters the charging screen B.
- Displays battery capacity percentage, charging progress bar, battery voltage, and charging current.
- Charging complete.
Relationship between charging current and battery temperature for fast- charging batteries.
The battery is protected from charging over temperature and the charger can intelligently identify the battery temperature and restart charging when the battery temperature is reduced.
Anomalies
Code of Error
Complete machine specifications
Installation method
Installation diagram
Installation steps
- Use the 6 mounting holes in the wall bracket according to the diagram and mark the corresponding positions on the wall with a marker;
- Drill a hole in the solid wall to the same size as the expansion tube b, approximately 10mm in diameter and 50mm in depth, according to the location markings;
- Insert the expansion screw a through the bracket, attach the expansion tube b and the header c in turn and turn until half-loose;
- Place the expansion screw in the hole and tighten it with the hexagonal spanner, the expansion tube b will be hung on the wall after the force is applied;
- Place the lugs of the 8-channel charger into the recesses on either side of the hanger to complete the installation.
Note: If mounting this charger on a stand, take care to keep a distance of 10cm or more between the top and bottom chargers.
CONTACT
- Tel: +86-25-85805753
- Fax: +86-25-85805296
- http://www.swit.cc
- E-mail: contact@swit.cc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>