KINMA PT885BT Amplifier User Manual

PT885BT Amplifier

Product Information

Specifications:

• Model: PT885BT
• Power Input: 120AC 60Hz
• FCC Compliance: Part 15
• IC Compliance: Industry Canada’s licence-exempt RSSs

FCC Warning 15.19 Labeling requirements:

This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.

FCC Information to user:

Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.

FCC RF Radiation Exposure Statement:

1. This Transmitter must not be co-located or operating in
   conjunction with any other antenna or transmitter.

2. This equipment complies with RF radiation exposure limits set
   forth for an uncontrolled environment. This equipment should be
   installed and operated with a minimum distance of 20cm between the
   radiator and your body.

IC Warning:

This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This
device may not cause interference, and (2) This device must accept
any interference, including interference that may cause undesired
operation of the device.

The information listed above provides the user with information
needed to make him or her aware of RF exposure and what to do to
assure that this radio operates within the FCC exposure limits of
this radio.

The device complies with RF specifications when used at a
minimum distance of 20cm from the body. Third-party belt-clips,
holsters, and similar accessories used with this device should not
contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure
requirements and should be avoided. Please use only the supplied or
an approved antenna.

Product Usage Instructions

Installation:

1. Ensure that the device is placed on a stable surface.
2. Connect the power input (120AC 60Hz) to a suitable power
   outlet.

Operation:

1. Turn on the device using the designated power button.
2. Follow the device’s user interface or display instructions for
   specific operations.

Maintenance:

To maintain the device’s performance and safety, please adhere
to the following guidelines:

• Keep the device clean and free from dust or debris.

• Avoid exposing the device to extreme temperatures or
  humidity.

• Do not attempt to disassemble or repair the device yourself.
  Contact authorized service centers for assistance.

Storage:

If you need to store the device for an extended period, please
follow these steps:

1. Turn off the device and disconnect it from the power
   source.

2. Store the device in a cool, dry place away from direct
   sunlight.

Frequently Asked Questions (FAQ)

Q: Can I use third-party accessories with this device?

A: Yes, you can use third-party accessories such as belt-clips
or holsters, but please ensure that they do not contain any
metallic components. Metallic components may interfere with the
device’s RF exposure requirements.

Q: Is the supplied antenna the only one I can use with this

device?

A: No, you can use an approved antenna in addition to the
supplied one. However, it is important to use only approved
antennas to maintain compliance with RF specifications.

MODEL:PT885BT

120AC 60Hz

FCC Warning 15.19 Labeling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement:
1.This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2.This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.

IC Warning
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1)This device may not cause interference; (2)This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1)l’appareil ne doit pas produire de brouillage, et (2)l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio.
The device complies with RF specifications when the device used at 20cm from the body.Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>