ELATION PROFESSIONAL DP-DMX4B Channel Dimmer Pack Instruction Manual
- June 17, 2024
- ELATION PROFESSIONAL
Table of Contents
ELATION PROFESSIONAL DP-DMX4B Channel Dimmer Pack
Specifications
- Power Input: AC 120V~60Hz, 20A max.
- Channel Output: 5A per channel, Total 20A
- Fuse (Internal): 6A 250V 5x20mm (x4PCS)
- Dimensions: 197 x 124 x 60mm
- Weight: 2.6Lbs./1.2Kgs
Thank you for purchasing the DP-DMX4B by Elation Professional®. For your convenience, this DPDMX4B has been tested and is ready to be used, there is no assembly required.
PRODUCT DESCRIPTIONS
The DP-DMX4B is a 4-channel DMX dimmer pack, it can extend to a maximum of 512
channels using the DMX-512 protocol. The DP-DMX4B features include zero-
crossing circuitry for protection of inductive loads; 3-prong Edison sockets
for each channel; individual 6A fuses for each channel; XLR connection and a
maximum output load of 5A per channel or 20A total.
GENERAL FUNCTIONS
- Channel Output: 5A per channel, Total 20A
- Channel LEDs: These LEDs indicate the dimming, On/Off of the appropriate channels.
- DMX Dipswitches: Slide these dipswitches to select the desired DMX address (DMX address is printed on the top cover of the DP- DMX4B.)
- Power LED: The LED is lit when power is on.
- DMX LED: This LED begins flashing when a DMX signal is present.
- Power Switch: Turns the main power on/off.
- Power Input: AC 120V~60Hz, 20A max.
- DMX Input: This connector accepts your DMX input signals.
- DMX Output: This connector sends your DMX signal through to the next DMX device.
SPECIFICATIONS
- Power Input. ………….AC 120V~60Hz, 20A max.
- Channel Output. ………………..5A/CH., Total 20A
- Fuse (Internal) ……….6A 250V 5x20mm (x4PCS)
- Dimensions ………………………197 x 124 x 60mm
- Weight. ………………………………….2.6Lbs./1.2Kgs
CAUTION! No user-serviceable parts inside. Do Not attempt repairs. In the
event your unit should fail, contact Elation Professional® at
323-582-3322.
WARNING! This product must be earthed. This product is intended for
indoor use only. To prevent fire or shock hazards, do not expose this product
to a high temperature or high humidity area.
FAQ
- Q: Can I exceed the maximum output load of 20A?
- A: No, it is not recommended to continuously use the DP-DMX4B under a total output load of 20A. Exceeding this limit may cause damage to the product.
- Q: Are there any user-serviceable parts inside the DP-DMX4B?
- A: No, there are no user-serviceable parts inside the DP-DMX4B. Do not attempt any repairs yourself. If your unit fails or requires service, contact a qualified technician.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>