sygonix 2739814 WLAN Weather Station with Large TFT Colour Display User Manual
- June 12, 2024
- Sygonix
Table of Contents
Important Note
WLAN weather station with large TFT colour display
Item no. 2739814
Intended use
The weather station is used to display various readings, such as
indoor/outdoor temperature and humidity, air pressure, precipitation, wind
speed, wind direction, UV index and light intensity.
The data measured by the outdoor sensor are wirelessly transferred to the
weather station.
Furthermore, the weather station calculates a weather forecast and displays it
using graphical symbols on the display.
In addition, you can register your weather station with various weather
websites, such as ecowitt.net, and operate it using the
“VSView Plus” app. A free account is required to use the app.
Readings can be stored on the product’s micro SD card (max. 32 GB, not
included) or transferred to a weather website.
When data is transferred to ecowitt.net, you can receive
alerts via e-mail through the website.
The weather station is powered via the supplied USB power adapter and the
dedicated USB cable.
The outdoor sensor is powered via the supplied power adapter or the built-in
solar cell. Two AA/Mignon batteries are used as a backup power source.
The weather station is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
The outdoor sensor has an IP44 protection class and is thus suitable for
outdoor use.
Using the product for purposes other than those described above may damage the
product.
Improper product use can cause a short circuit, fire, electric shock, other
hazards.
This product complies with statutory, national and European regulations. For
safety and approval purposes, you must not rebuild and/or modify the product.
Read the instructions carefully and store them in a safe place.
Always provide these operating instructions when giving the product to a third
party.
All company and product names contained herein are trademarks of their
respective owners.
All rights reserved.
Android™ is a registered trademark of Google LLC.
Delivery content
- Weather station
- USB power adapter (weather station)
- USB cable for power supply
- Outdoor sensor
- Power adapter (outdoor sensor)
- 10 m connection cable (outdoor sensor)
- Operating instructions (digital as download)
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Operating instructions
You can download the complete user manual for the product from our downloads page. Please refer to the previous chapter.
Explanation of symbols
The following symbols appear on the product/device or in the text:
This symbol warns of hazards that can lead to personal injury. Read the
information carefully.
This symbol warns of a dangerous voltage which can lead to injuries due to
electric shock. Read the information carefully.
The product should only be used in dry, indoor locations. It must not get damp
or wet.
The product is designed according to Protection Class II.
Pay attention to the operating instructions!
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
6.1 General
- This product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. It may become a dangerous plaything for children.
- Should you have any questions or concerns after reading this document, please contact our technical support or a professional technician.
- Maintenance, modifications and repairs must be carried out only by a skilled technician or a specialist repair centre.
6.2 Handling
- Please handle the product carefully. Impact, shocks or a fall even from a low height can damage the product.
6.3 Operating environment
- Do not expose the product to any mechanical stress.
- Protect the product from extreme temperatures, strong jolts, flammable gases, vapours, and solvents.
- The weather station is suitable only for dry indoor areas. Do not expose the product to direct sunlight, strong heat, cold, humidity or moisture; otherwise it may be damaged.
- The outdoor sensor is designed for outdoor use. It must not be used in or under water, this will destroy it.
- Never switch the device on immediately after taking it from a cold into a warm environment. This may cause condensation to form, which can destroy the product. Allow the product to reach room temperature before using it.
- Avoid using the product near strong magnetic or electromagnetic fields, transmitter aerials or HF generators. Otherwise, the product may not function properly.
6.4 Operation
- Consult an expert when in doubt about the operation, safety or connection of the device.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
6.5 Power adapters
Never attempt to modify the electrical components of the power adapters for
the weather station and outdoor sensor. Risk of fatal electric shock!
-
Always ensure that the mains plug is properly connected.
-
Discontinue use of the device if any electrical components are damaged.
-
Do not modify the electrical components.
-
Connect the product to an easily accessible socket.
-
Only use the included power adapter.
-
Only connect the power adapter to a normal mains socket connected to the public supply.
Before plugging in the power adapter, check whether the voltage stated on the power adapter complies with the voltage of your electricity supplier. -
Never connect or disconnect power adapters if your hands are wet.
-
For safety reasons, always disconnect the power adapter from the mains socket during lightning storms.
-
Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Proceed as follows:
– First, cut off the power supply to the mains socket to which the power adapter is connected (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch so that all poles of the mains socket are disconnected).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged power adapter again. -
Make sure that the cable is not pinched, kinked or damaged by sharp edges.
-
Always lay cables so that nobody can trip over or become entangled in them. Failure to do so could result in injury.
-
Consult an expert when in doubt about the operation, safety or connection of the device.
-
A damaged product may only be repaired by the manufacturer, a workshop commissioned by the manufacturer, or a similarly qualified person so as to prevent any danger.
6.6 (Rechargeable) batteries
- Correct polarity must be observed while inserting the batteries.
- If you do not plan to use the product for an extended period, remove the (rechargeable) batteries to prevent damage from leaking. Leaking or damaged (rechargeable) batteries may cause acid burns if they come into contact with your skin. Therefore, use suitable protective gloves when handling damaged (rechargeable) batteries.
- Batteries/rechargeable batteries must be kept out of reach of children. Do not leave batteries/rechargeable batteries lying around, as there is a risk that children or pets may swallow them.
- All (rechargeable) batteries should be replaced at the same time. Mixing old and new (rechargeable) batteries in the device can lead to (rechargeable) battery leakage and device damage.
- (Rechargeable) batteries must not be dismantled, short-circuited or thrown into fire. Never attempt to recharge non-rechargeable batteries. This may cause an explosion!
Disposal
7.1 Product
**** This symbol must appear on any electrical and electronic equipment
placed on the EU market. This symbol indicates that this device should not be
disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste. Conrad provides the following return options
free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
7.2 (Rechargeable) batteries
Remove batteries/rechargeable batteries, if any, and dispose of them
separately from the product. According to the Battery Directive, end users are
legally obliged to return all spent batteries/rechargeable batteries; they
must not be disposed of in the normal household waste.
**** Batteries/rechargeable batteries containing hazardous substances are
labelled with this symbol to indicate that disposal in household waste is
forbidden. The abbreviations for heavy metals in batteries are: Cd = Cadmium,
Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the
trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your
municipality, our stores or wherever (rechargeable) batteries are sold. You
thus fulfil your statutory obligations and contribute to environmental
protection.
Batteries/rechargeable batteries that are disposed of should be protected
against short circuit and their exposed terminals should be covered completely
with insulating tape before disposal.
Even empty batteries/rechargeable batteries can contain residual energy that
may cause them to swell, burst, catch fire or explode in the event of a short
circuit.
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this product conforms to the 2014/53/EU directive.
- Click on the following link to read the full text of the EU declaration of conformity: www.conrad.com/downloads
Enter the product item number in the search box. You can then download the EU declaration of conformity in the available languages.
Technical data
9.1 Weather station power supply
Input voltage …………………………… 5 V/DC
Power consumption …………………. max 1 A
9.2 Outdoor sensor power supply
Power supply ………………………….. power adapter or built-in solar cell, batteries as a
backup
power source
Input voltage …………………………… 12 V/DC (mains connection)
Solar cell ………………………………… 6.5 V/DC, max. 4 mA
Batteries ………………………………… 2x 1.5 V AA/Mignon batteries (not included)
9.3 Weather station (only the most relevant)
Display …………………………………… TFT LC display 17.86 cm (7″)
Sensor components …………………. temperature, humidity, air pressure
Sensor measurement interval ……. 60 seconds
Alarm duration ………………………… 120 seconds
Channels ……………………………….. up to 8 channels for sensors
Supported memory card …………… micro SD, micro SDHC, max. 32 GB, FAT32 format
Mounting/operating location ……… Dry, enclosed indoor spaces
9.4 Outdoor sensor (only the most relevant)
Radio transmission ………………….. RF 868 MHz to weather station
Sensor components …………………. temperature, humidity, wind speed, wind direction,
precipitation, UV index, light intensity
IP protection class …………………… IP44
Mounting/operating location ……… outdoor area
9.5 Weather station/outdoor sensor radio module
RF …………………………………………. 868 MHz
Frequency ………………………………. 868.315 – 868.85 MHz
Channel spacing/bandwidth ……… 35 kHz
Transmission power…………………. 36 dBm
Range ……………………………………. max. 150 m (in open space)
WLAN ……………………………………. IEEE802.11b/g/n, 72.2 Mbit, 2.4 GHz
Frequency ………………………………. 2.400 – 2.4835 GHz
Transmission power…………………. < 19.5 dBm
Range ……………………………………. max. 50 m (in open space)
9.6 Weather station power adapter
Input voltage/current ………………… 100 – 240 V/AC, 50/60 Hz, 0.2 A
Output voltage/current ……………… 5 V/DC, 1 A, 5 W
Power adapter output ………………. USB Type A
USB cable ………………………………. USB Type A to 2.5 x 0.7 mm (female +)
9.7 Outdoor sensor power adapter
Input voltage/current ………………… 100 – 240 V/AC, 50/60 Hz, 0.6 A
Output voltage/current ……………… 12 V/DC, 1 A, 12 W
Output ……………………………………. 2-pole
Protection class ………………………. IP68
9.8 Weather station ambient conditions
Operating/storage conditions …….. -10 to +60 °C, 10 – 99% RH (non-condensing)
9.9 Outdoor sensor ambient conditions
Operating/storage temperature …. -40 to +60 °C, 1 – 99% RH (non-condensing)
9.10 Other weather station data
Dimensions (W x H x D) …………… approx. 195 x 138 x 20 mm
Weight …………………………………… approx. 220 g
9.11 Other outdoor sensor data
Dimensions (Ø x H) …………………. approx. 93 x 200 mm
Weight …………………………………… approx. 430 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g.
photocopy, microfilming, or the capture in electronic data processing systems
require the prior written approval by the editor. Reprinting, also in part, is
prohibited.
This publication represent the technical status at the time of printing.
Copyright 2023 by Conrad Electronic SE.
*#2739814_V1_0623_02_m_VTP_SS_ENhttp://www.conrad.com/downloads
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>