VanGaa Lighting 18 Pcs LED Wall Wash Light User Manual

VanGaa Lighting 18 Pcs LED Wall Wash Light

Product Information

Specifications

• Voltage: AC90-220V, 50-60HZ
• Light source: 18PCS 6 in1 lamp beads
• Channel: 6/8/11/108/110CH
• Control mode: DMX512, Sound Activated, master-slave, auto

Product Usage Instructions

Key Button Description

• MENU: Function key
• UP: Plus key
• DOWN: Minus key
• ENTER: Confirm key

Digital Tube Display Menu Description

1. DMX512 Address Setting:
   • A001 – 001-512
2. Channel Mode Setting:
   • 11CH – 6/8/11/108/110CH
3. Red Dimming:
   • R255 – 000-255 (from dark to bright)
4. Green Dimming:
   • G255 – 000-255 (from dark to bright)
5. Blue Dimming:
   • B255 – 000-255 (from dark to bright)
6. White Dimming:
   • W255 – 000-255 (from dark to bright)
7. Total Strobe:
   • F000 – 005-255 (from slow to fast)
8. Color Selection:
   • CL01 – red, green, blue, white, yellow, purple, cyan, RGBWAUV
9. Auto Run Effect Speed:
   • EF01 – SP01-SP15 (from slow to fast)
10. Sound Mode Sensitivity:
    • SU01 – SE01-SE15 (from low to high)

Channel Settings

• Channel 6 (Full Lamp)
  • CH1: Red Dimming (000-255)
  • CH2: Green Dimming (000-255)
  • CH3: Blue Dimming (000-255)
  • CH4: White Dimming (000-255)
  • CH5: Amber Dimming (000-255)
  • CH6: Violet Dimming (000-255)
• Channel 8 (Full Lamp)
  • CH1: Red Dimming (000-255)
  • CH2: Green Dimming (005-255)
  • CH3: Blue Dimming (000-255)
  • CH4: White Dimming (000-255)
  • CH5: Amber Dimming (000-255)
  • CH6: Violet Dimming (000-255)
  • CH7: Total Dimming (000-255)
  • CH8: Total Strobe (000-255)
• 108 Channel (Point Control)
  • CH1 – CH18: Individual dimming for each color (red, green, blue, white, amber, violet) (000-255)
• 110 Channel (Point Control)
  • CH1: Total Dimming (000-255)
  • CH2: Total Strobe (005-255)
  • CH3 – CH11: Individual dimming for each color (red, green, blue, white, amber, violet) (000-255)

FAQ

• What is the voltage requirement for this product?
  The voltage requirement is AC90-220V, 50-60HZ.

• What are the available control modes for this product?
  The available control modes are DMX512, Sound Activated, master-slave, and auto.

• How many channels are available for channel mode setting?
  There are 6, 8, 11, 108, and 110 channels available for channel mode setting.

Installation and operating instructions

1. Plugged into a grounded power outlet .

2. Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.

3. Disconnect the equipment from the power supply before any operation.

4. The ambient temperature should not exceed 40°C, and the maximum ambient temperature is 45°C. Don’t operate the device at higher temperatures.

5. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.

6. Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.

7. The lamps are only used for decoration and not suitable for ordinary household lighting.

8. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a screwdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.

9. WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.

10. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment that is at least ten times.

11. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.

12. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support the sustainable recycling of resources in order to protect the environment and human health Utilize. If you need to recycle used electrical appliances, please go to an electrical appliance collection center or contact the dealer where you purchased the product to ensure the ecological recycling of the product.

13. Before cleaning the device, disconnect it from the power source if connected. Do not use harsh cleaners.
    Wipe off dust or dirt from the product with a clean cloth.
    We are not responsible for damage caused by incorrect handling, improper use or wear and tear.

14. We reserve the right to make technical modifications.

Technical parameters

• Voltage: AC90-220V, 50-60HZ
• Light source: 18PCS 6 in1 lamp beads
• Channel: 6/8/11/108/110CH
• Control mode: DMX512,Sound Activated, master-slave, auto.

Key button description

• MENU: Function key
• UP: Plus key
• DOWN:Minus key
• ENTER: Confirm key

Digital tube display menu description

Chanel Description

Channel 6 (Full lamp)

Channel 8(Full lamp)

11 Chanel Mode (Basic Function)

108 Channel (point control)

110 Channel (point control)

Documents / Resources

| VanGaa Lighting 18 Pcs LED Wall Wash Light [pdf] User Manual
18 Pcs LED Wall Wash Light, 18 Pcs, LED Wall Wash Light, Wall Wash Light, Wash Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>