Executive BG-688Z Leather Office Chair Instruction Manual

**BG-688Z Leather Office Chair Instruction Manual

**

Accessories List

1. Central Base Buckle

2. Central Base Tube

3. Split Base Tube

4. 5 Castors

5. Air Rod

6. Base Plate

7. 2 Armrests
   

8. Backrest

9. Seat Cushion

10. Steel Plate

11. Neck Pillow

12. Footrest

13. 4 Decoration Caps

14. Hexagon Wrench

15. 4 Screws (M6x20mm) (Base Plate)

16. 2 Screws (M6x30mm) (Footrest)

17. 5 Screws (M6x16mm) (Split Base Tube

18.  4 Screws (M8x25mm) (Steel Plate-above

19. 4 Screws (M8x25mm) (Steel Plate-below

20. 4 Screws (M8x40mm) (Armrests)

Notice if any question, contact BestGlory.[Spt@gmail.com]

1. Do not stand in this chair or use the chair as a step ladder use it as chair only. This chair is designed for one person to use at a time.
2. Do not use this chair unless all bolts, screws and knobs are firmly secured.
3. Check all bolts, screws and knobs every 90days. Tighten if any are loose.
4. Failure to follow these instructions may result in serious injury or death of yourself and people around you.
5. Some of the parts are heavy and/or have sharp edge, please install it carefully to avoid hurting you and people around you

Instructions for Use

Upward Adjustment

Downward Adjustment

Backrest Adjustment

With Foot Cushion

Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction proper Make sure all the parts are included (20 kinds in total).

Assembly Instruction

Please assemble in a wide and flat place.

Step 1
Take out Split Base Tube (3), Central Base Tube (2) and Central Base Buckle(1). Insert Split | into Central Base Tube(2) as shown. You can see there are screw holes. Align with the holes Screws M6X16mm (17) with Hexagon Wrench (14) to fix 5 Split Base Tube (3) to Central Ba Repeat it 5 times. Finally, attach the Central Base Buckle (1) to the Central Base Tube (2).

*Step 2
Insert Castors (4) into the Split Base Tube (3). There are 5 Castors need to be inserted. Put Air Rod (5) into the hole of Central Base Tube (2) as shown. Put it aside and we’ Il use it in Step 4. Caution: Confirm Castors(4)must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.

Step 3
Take out Base Plate (6)、 Seat Cushion(9) and Footrest(12). Fix Base Plate (6) to the bottom of Seat Cushion (9). Tighten Screws M6X20mm (15) with Hexagon Wrench (14) firmly. Next, fix Footrest (12) to the bottom of Seat Cushion (9). Tighten Screws M6X30mm (16) with Hexagon Wrench (14) firmly. *Caution: There is a FRONT sticker on the front of Seat Cushion (9)

Step 4
First pick up the Air Rod (5) and the Center Base Tube (2) from step 2. Insert the Air Rod (5) into the Base Plate (6), the Base Plate (6) has holes in the middle. Then align the Neck Pillow (11) with the hole on the Backrest(8) and insert it. Next, fasten the Backrest (8) with Steel Plate (10) and tighten the M8X25mm (18) screws with Hexagon Wrench (14). Connect the Seat Cushion (9) and Steel Plate (10) and tighten the M8X25mm (19) screws with Hexagon Wrench (14).

Step 5
Tighten the Screws M8X40(20) with Hexagon Wrench (14)and fix the 2 Armrests (7) between the Backrest (8)and the Seat Cushion (9). Tighten the 4 screws firmly and then cover the screws with Decoration Caps(13). The assembly is complete now. Caution: When you connect the armrest with the cushion, if the hole position of the armrest is not aligned with the hole. position of the cushion, please force the armrest to align with the hole position of the cushion and install the screw. Caution: After the product is fully assembled, check the screws for tightening

**

Activate Your Warranty Now!

We guarantee you a pleasant buying experience. Please scan the QR code to activate your warranty so that you can enjoy priority better after-sales service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>