PROAIM TP-TRBS-01 13.4ft Triple Riser Stand Instruction Manual
- June 17, 2024
- PROAIM
Table of Contents
PROAIM TP-TRBS-01 13.4ft Triple Riser Stand Instruction Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Triple Riser 5/8” Baby Stand
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photo-
copying, recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Triple Riser Stand Setup
-
Loosen the knob of the Triple Riser Stand and spread the tripod legs.
-
After spreading the legs, re-tighten its knob.
-
Now, loosen both knobs of the Triple-Riser Stand.
-
After loosening the knob, adjust the height of the Stand.
-
After adjusting the height of the Stand, re-tighten both the knobs.
-
Feature: Triple-Riser Stand features a broad foot base, collapsible legs, and a middle-level spreader,
ensuring exceptional stability both indoors and outdoors. -
Loosen the bottom knob of the Triple Riser Stand and increase its height, as shown in the image.
-
Re-tighten the knob after increasing its height.
-
Similarly, loosen the center knob of the Triple Riser Stand and increase its height.
-
Now, re-tighten the knob.
-
Loosen the top knob of the Triple Riser Stand and increase its height.
-
Now, Re-tighten the top knob.
-
You can adjust the height of the Triple Riser Stand per your requirement.
NOTE: Triple Riser 5/8 Baby Stand provides unparalleled support, stability, and elevation for heavy fixtures and grip equipment.
4 Section Adjustable Height Range
Screen Setup
-
Loosen the knob of the Screen (Not Included) and mount it on the Triple Riser Stand via the 5/8” baby pin.
-
After mounting the Screen, re-tighten the knob.
Feature: The 5/8″ baby pin allows mounting studio equipment like lights,
reflectors, and other support accessories, providing you with versatile
options for your creative endeavors.
Leveling Leg For Uneven Surface
-
Loosen the locking knob of the levelling leg and extend the leveling leg per your requirement.
-
After balancing the Leveling Leg, re-tighten the locking knob.
NOTE: The stand is equipped with a leveling leg that tilts up to 6 inches, accompanied by a convenient locking knob that facilitates effortless adjustments.
YOUR PROAIM 13.4FT TRIPLE RISER STAND W 5/8” MOUNT ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>