chicco 8058664110711 Polly Magic Relax Highchair User Manual

: June 17, 2024
: chicco

User Manual

8058664110711 Polly Magic Relax Highchair

INSTRUCTIONS FOR USE

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
This high chair can be used in two different ways:

Only for domestic use.
Reclined cradle: from 0 months
How to use the high chair: from 6 months to 36 months and 15kg.

COMPONENTS

A. Frame
A1. Front legs
A2. Rear legs
A3. Front wheels (2x)
A4. Tray locking slots
A5. Open/close buttons
A6. Rear wheels (x2)
B. Seat
B1. Height adjustment buttons
B2. Legrest
B3. Footrest
B4. Legrest adjusting/tilting buttons
B5. Armrests
B6. Armrest tilting buttons
B7. Backrest
B8. Backrest tilting button
B9. Backrest locking pin
B10. Pin slide hole
B11. Child safety harness with 5-point buckle
B12. Lining
B13. Padded booster cushion
C. Tray
C1. Tray Cover
C2. Fastening/adjustment central button
C3. Fastening hooks
D. Toy bar
D1. Toy bar structure
D2. Toy bar fastening hooks
D3. Toy bar fastening tabs
D4. Fastening safety stop
D5. High chair joints
D6. Toy bar joints
D7. Fabric hanging toys

TIPS FOR CLEANING AND MAINTENANCE

The cleaning and maintenance of the product must only be carried out by an adult.

CLEANING

Clean the fabric cover with a soft cloth soaked in water or a neutral detergent. To remove the fabric cover from the high chair repeat, in reverse order, the operations described to fix the fabric cover to the structure. Clean the plastic parts with a soft cloth soaked in water. Never use abrasive detergents or solvents. If the high chair comes into contact with water, dry the metal parts to prevent the formation of rust.

COMPOSITION

Outer cover: Polyurethane
Padding: Polyester

MAINTENANCE

Keep the high chair in a dry place.
To avoid friction that may compromise the correct function of the high chair, ensure that all the moving plastic parts located along the metal frame are free from dust, dirt or sand.
If necessary, lubricate the moving parts with dry silicone lubricant.

FABRIC REDUCER CUSHION

To use the reducer cushion correctly, pass the high chair belts through the corresponding holes.

FABRIC REDUCER CUSHION WASHING TIPS

Wash in lukewarm water (maximum 30°); Do not bleach, do not dry in the dryer, do not iron, do not dry clean.

Wash by hand in cold water
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

FABRIC COMPOSITION

Outer cover: 100% polyester
Padding: 100% polyester

FIRST USE/OPENING

WARNING: The product is inserted in the package wrapped in a protective foil. When removing, make sure to avoid damage to the product and its additional components by cutting objects.
Once the product is open, quickly remove the packaging components and keep them out of reach of children!
Once using the first time, the backrest needs to be changed from packaging to use position, making it rotate up until you hear the engagement click (Fig.1).
It is now no longer possible to return the backrest to packaging position.
Insert the rear wheels (A6) in the specific slots (Fig.1A), pushing them in as far as they will go.
WARNING: Check that pin B9 is always engaged correctly in the sliding hole B10 by pressing lightly on the back toward the rear part of the high chair.
To open the frame, press simultaneously the A5 opening/closing buttons, distancing the front legs A1 from the rear legs A2 (Fig. 2) until the click indicates complete opening.
Insert the footrest B3 in one of the four slots (Fig.3) of the legrest B2 turning until it locks.
To put the cover on the seat B, after unfastening the safety harness (Fig. 4), the cover B12 must be fitted from the top to the bottom until it fits in the backrest part (Fig. 5).
Put the cover B12 on the seat B, inserting the safety harness B11 in appropriate cover holes.
Make sure that the positions of the holes on the fabric cover correspond to those on the backrest.

SAFETY HARNESS

WARNING: The use of the safety harness with fabric crotch strap is essential to guarantee the safety of your child.
WARNING: The tray alone does not guarantee the safety of your child. Always use the safety harness!
The high chair has a 5-point safety harness.
Release the safety harness, place the child on the high chair and secure the child with the harness, adjusting its length so it suits the child.
The safety harness can be adjusted to two height positions. The buckle may be released by pressing the forks.
The width of the waist belts can be adjusted using the relevant sliding rings (Fig. 6).

TRAY POSITIONING/ADJUSTMENT

The tray can be adjusted to 4 different positions.
To fasten the tray C, turn the armrests B5 and make sure that they are locked in horizontal position (Fig. 7).
Insert the armrests in the guides below the tray, keeping the central fastening button C2 pressed (Fig. 8).
Move the tray to the desired position and release the button.
If the tray is not automatically locked on the armrests, move the tray until a click is heard, indicating that the tray has locked.
WARNING: before use, always check the correct fastening of the tray on the armrests.
WARNING: the tray may only be adjusted to the 4 indicated positions.
WARNING: never leave the tray fitted in a position in which the danger signs are visible on the armrests: This position is NOT safe!
WARNING: When the tray is fitted on the product, make sure to avoid the inadvertent pressing of the armrest tilting buttons.
To remove the tray, press the central button C2. When not in use, the tray may be fastened to the rear of the structure (Fig. 9) in the relevant slots A4. The high chair is equipped with a tray cover C1. It can be fastened to the tray sides with a pressure mechanism.
WARNING: When in use, always make sure that the tray cover is correctly fastened. If the child eats at the table with the parents, the tray cover may be used as a convenient place mat.

WHEELS
The rear legs have swivel wheels with brakes (A6).
The front legs of the high chair are equipped with oneway wheels A3 to facilitate handling and opening/closing operations.
WARNING: always place the chair on a horizontal, stable surface. Never place the high chair near stairs or steps.
To activate the high chair brakes, lower the wheel locking levers. To release the brakes, raise the levers again (Fig.10).

HEIGHT ADJUSTMENT

The high chair can be adjusted to 8 height positions.
To raise the seat, hold the upper part of the backrest and pull it upwards, until the desired height is reached (Fig. 11).
To lower the seat, press the two B1 buttons at the same time, lowering the seat until the desired height is reached (Fig.12).
WARNING: do not carry out this operation with the child sitting in the high chair.

HOW TO CLOSE THE CHAIR

WARNING: when performing this operation, ensure that your child, or other children, are at a safe distance.
Make sure that during these operations the removable parts of the high chair do not come into contact with your child.

Place the backrest in vertical position (Fig. 13), remove the tray and fit it to the rear legs, then tilt the armrests by pressing the buttons B6 (Fig. 14).
Completely lower the seat by pressing the two height adjustment buttons B1 at the same time.
Press the opening/closing buttons A5 located at the centre of the lateral joints and at the same time approach the legs of the high chair (Fig.15).

LEGREST
The high chair is equipped with a legrest B2 that can be adjusted to 3 positions of use; press the two buttons B4 and tilt the legrest until reaching the desired position.
WARNING: The legrest can turn upward to non-usable positions (Fig. 16)

FOOTREST
The high chair is equipped with a footrest B3 that can be adjusted to 4 height positions. From the currently used position turn it upwards until it unlocks. Remove the footrest and fit it at the desired height.

RECLINED CRADLE (0m+)
RECLINED CRADLE USE WARNING

WARNING: Never leave the child unattended.
WARNING: Never use the toy bar to carry the product.
WARNING: Stop using the product when the child starts to stand up.
WARNING: Never use this product on an elevated sur- face (e.g. a table).
WARNING: Always use the restraint systems.
Age range intended for use: from birth to 12 months
Never let the child sleep in this product. This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.
Do not use the reclined cradle if any components are broken or missing.
Do not move or lift this product with the baby inside it.
Do not use accessories or replacement parts other than those approved by the manufacturer.
The product and all of its components must always be assembled by an adult.
Do not use the reclined cradle with more than one child at time.
Never leave the seat on surfaces that are not perfectly horizontal.
Always supervise children playing near the reclined cradle.
To prevent fire hazards, do not leave the reclined cradle near sources of heat, electrical and gas devices, etc.
Make sure that the cover is properly secured to the structure of the chair.
Make sure that all parts are correctly hooked to the mounts.
Periodically check for any worn parts, loose screws, worn or unstitched materials and replace any damaged parts immediately.
Do not place the reclined cradle with the child near windows or walls, where strings, curtains or other objects could be used by the child to climb or causing chocking or strangling hazards.
Keep the product out of children’s reach when it is not being used.

HOW TO USE THE BABY RECLINED CRADLE

The product may be used as reclined cradle by children aged 0 months or more and up to 9 kg.
To use it as a reclined cradle:

Completely tilt the backrest B7 of the seat B, by pressing the button B8 on the rear part of the backrest (Fig.17).
Adjust the legrest B2 to the completely horizontal po- sition (Fig.18).
The footrest B3 may be removed or adjusted according to the child’s height.

The operations described above may be performed with the child in the high chair as well, but they might be more difficult.
Whenever the seat height needs to be adjusted, this can be performed before the operations indicated in the above paragraph.

HIGH CHAIR (6m+)
HIGH CHAIR USE WARNING

WARNING: Never leave the child unattended.
WARNING: Always use the restraint systems.
WARNING: Falling hazard: Prevent your child from climbing on the product.
WARNING: Do not use the product unless all components are correctly fitted and adjusted
WARNING: Be aware of the risk of open fire and other sources of strong heat in the vicinity of the product.
WARNING: Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
WARNING: Make sure that any harness is correctly fitted before use.
WARNING: Always check the security and the stability of the high chair.
WARNING: Ensure that all safety devices are fitted and working correctly before using. In particular, make sure that the high chair is locked in the open position.
Do not use the high chair until the child can sit up unaided.
The highchair is intended for use for children who can sit up alone and are between 6 and 36 months of age, weighing up to 15 kg.
Do not use the high chair if any part is broken, torn or missing.
Before assembly, check that neither the product nor any of its components have been damaged during transportation. In this case, do not use and keep out of reach of children.
The high chair shall only be opened, adjusted and closed by an adult.
Make sure that the person using the high chair knows exactly how it functions.
When opening, adjusting or closing the booster seat, make sure that your child is at a safe distance.
Make sure that during the adjustment operations (tilting the backrest, adjusting the tray), the movable parts of the high chair do not come into contact with your child.
The use of the safety harness with fabric crotch strap correctly fastened to the seat and with rigid crotch bar is necessary to ensure the safety of your child when the chair is used as a high chair.
The tray alone does not guarantee the safety of your child. Always use the safety harness.
Never move the high chair with your child seated in it.
Do not allow other children to play unsupervised near the high chair, or to climb onto it.
Do not use the high chair for more than one child at a time.
Do not leave small objects on the high chair that can be swallowed by children.
Do not place the high chair near windows or walls where cords, curtains or other objects may be used by the child to climb out of the high chair or could represent choking or strangling hazards.
Always place the high chair on a horizontal, stable surface when the child is seated in it. Never place the high chair near stairs or steps or on carpets.
Bags or weights must not be placed on the tray or hung on the high chair frame, as they might affect the stability of the high chair.
If the high chair is exposed to direct sunlight for a long time, allow it to cool down before placing your child in it.
Do not leave the high chair in the sun for a long time: it may change the colour of the materials and fabric.
When not in use, the high chair must be kept out of the reach of children.
Never use the high chair without its cover.
Do not use components, replacement parts, or accessories not supplied or approved by the manufacturer.
Do not open or close the high chair when your child is sitting in it.
WARNING! When not in use, keep the tray out of the reach of children.
WARNING: If the high chair is equipped with parking brakes, always engage the parking device when the high chair is stationary.

HOW TO USE THE HIGH CHAIR

The product may be used as high chair from an age at which the child can sit up unaided, up to 36 months.
If used as high chair, it is possible to:

Adjust the height of the seat;
Adjust the legrest and footrest;
Tilt the backrest;
Use the tray and adjust it.

To perform the above mentioned operations, refer to the corresponding paragraphs.

USING TOY BAR

WARNING: Never use the toy bar to lift the high chair.
Do not attach any strings to extend the fastening systems of the toy bar’s hanging toys and do not make knots/loops: this may cause the accidental formation of loops that could pose strangling hazards. This toy must only be used under adult supervision.
Regularly check the product for signs of wear or any other damage. If any part of the product is damaged, do not use and keep out of the reach of children.
The toy bar must only be used together with the Polly Magic Relax high chair.
The toy bar must be reclined in order to keep the toys at an adequate distance from the face of the child, and to enable them to interact correctly with the toys when playing.

FITTING TOY BAR

Attach the structure of toy bar D1 to the high chair, placing the fixing hooks D2 on the side joints of the high chair D5 (Fig. 19).
To complete assembly, close the fastening tabs D3 (Fig. 20), pushing them until you hear a click confirming their correct engagement.
If you fit it incorrectly repeat the steps and check that stop D4 is correctly engaged. (Fig. 21) indicates that it has been correctly assembled.
To remove the toy bar, act on the safety stop D4 and at the same time turn the tabs D3 outwards (Fig. 22-23).

RECLINING THE TOY BAR
Using the joints D6, the toy bar can be adjusted to 3 different reclining levels (Fig. 24) depending on the seat position.

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as provided for by the instructions for use.
The warranty shall not therefore apply in the case of damages caused by improper use, wear or accidental events.
For the duration of warranty on conformity defects please refer to the specific provisions of national laws applicable in the country of purchase, where provided.
NOTE………….

ARTSANA UK Ltd.
2nd Floor 1 Imperial Place Maxwell Road
Borehamwood
Hertfordshire – WD6 1JN 0208 953 6627 (office hours)
www.CHICCO.uk.com ARTSANA S.p.A. – Via Saldarini Catelli, 1 – 22070 Grandate (CO) – Italy
Tel. (+39) 031 382 111 – Fax (+39) 031 382 400 – www.chicco.com
46 079502 000 000 _ 2321