Gelius ROYAL 220 Panel e Rack Instruction Manual
- June 17, 2024
- Gelius
Table of Contents
Gelius ROYAL 220 Panel e Rack
Specifications
- Upper panel Size: 2190mm x 670mm x 15mm
- Central panel Size: 2190mm x 530mm x 15mm
- Lower panel Size: 2190mm x 670mm x 15mm
- Joinder ruler Size: 2190mm x 80mm x 6mm
- Templet Size: 745mm x 40mm x 15mm
- Shelf Size: 1878mm x 200mm x 20mm
- Side ruler Size: 1940mm x 60mm x 20mm
- Rear ruler Size: 1084mm x 60mm x 20mm
- Larger miter ruler Size: 1700mm x 60mm x 20mm
- Minor miter ruler Size: 450mm x 60mm x 20mm
Producr Usage Instructions
Step 1: Prepare the room
Before starting the assembly, make sure to prepare the room. Clean the area and ensure it is in good condition for the work. Use the cardboard from the packaging to separate and support the parts removed from the boxes.
Step 2: Apply glue to wooden dowels
If the product includes wooden dowels, apply glue to them before inserting
them into the corresponding holes.
Step 3: Recommended tools
- Tool 1 (quantity: 3)
- Tool 2 (quantity: 2)
- Tool 3 (quantity: 8)
- Tool 4 (quantity: 12)
- Tool 5 (quantity: 8)
- Tool 6 (quantity: 2)
- Tool 7 (quantity: 4)
- Difusor Profile (quantity: 1)
Step 4: Define the location and height
Decide where you want to install the panel and mark the position of the
fixing holes on the wall. Make sure the panel will be leveled when marking the
holes.
Step 5: Pass necessary wiring
In this step, pass all the necessary wiring, including the LED strip if
applicable.
Step 6: Fix accessories
Use the provided measurements to correctly fix any accessories included in
the package.
Step 7: Apply glue to LED channel
Apply a few drops of glue to the LED channel for better adhesion.
Step 8: Install LED strip
Pass the LED strip through the designated hole and attach one part of the
strip to the left side and another part to the right side.
ROYAL 220
Assembly instructions
| Nº | Cód. | Parts | Media / Size | Qtd. | Vol. |
|---|---|---|---|---|---|
| 01 | 08239 | Upper panel | 2190x670x15 | 01 | 01 |
| 02 | 08241 | Central panel | 2190x530x15 | 01 | 01 |
| 03 | 08240 | Lower panel | 2190x670x15 | 01 | 01 |
| 04 | 08238 | Joinder ruler | 2190x80x6 | 02 | 01 |
| 05 | 08143 | Templet | 745x40x15 | 01 | 02 |
| 06 | 08242 | Shelf | 1878x200x20 | 01 | 02 |
| 07 | 08243 | Side ruler | 1940x60x20 | 02 | 02 |
| 08 | 08244 | Rear ruler | 1084x60x20 | 02 | 02 |
| 09 | 08245 | Larger miter ruler | 1700x60x20 | 02 | 02 |
| 10 | 08246 | Minor miter ruler | 450x60x20 | 08 | 02 |
Recommendations
Attention: This product must be assembled by a professional.
- Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Use the cardboard of the packaging to separate and support the parts removed from the boxes.
- How to use the Minifix Set (when used in the product).
- Apply glues to the wooden dowels (when used in the product).
Recommended tools
Hardware
Installation Instructions
ATTENTION! Before starting the installation, check all the conditions of the wall, notably regarding resistance and weight support and the existence and position of hydraulic, gas and electrical lines, avoiding damage to these structures when running holes. Gelius Móveis not responsible for problems caused by inexperience, inadequacy or failure to follow due recommendations in the assembly and installation of their products by third parties.
Define the location and height at which the panel is to be installed and mark the position of the fixing holes on the wall.
ATTENTION! When marking the position of the holes in the wall, make sure that the panel is leveled.
With a drilling machine and drill (not supplied with the product), make the holes in the wall.
Attention : Use the measurements informed to correctly fix the accessories ( J ).
NOBRE 202
Assembly instructions
| Nº | Cód. | Parts | Media / Size | Qtd. | Vol. |
|---|---|---|---|---|---|
| 01 | 07707 | Base | 2021x290x15 | 01 | 01 |
| 02 | 07709 | Left side | 289x115x15 | 01 | 01 |
| 03 | 07714 | Division | 273x115x20 | 02 | 01 |
| 04 | 07711 | Spacer | 273x115x15 | 02 | 01 |
| 05 | 07710 | Right side | 289x115x15 | 01 | 01 |
| 06 | 07708 | Top | 2021x290x15 | 01 | 01 |
| 07 | 07365 | Side panel of the drawer | 250x100x15 | 06 | 01 |
| 08 | 07366 | Rear panel of the drawer | 614x100x15 | 03 | 01 |
| 09 | 07712 | Front of drawer | 672x155x15 | 03 | 01 |
| 10 | 07713 | Miter ruler | 1820x41x15 | 02 | 01 |
| 11 | 07378 | Bottom of the drawer | 597x262x2,5 | 03 | 01 |
Recommendations
Attention: This product must be assembled by a professional.
- Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Use the cardboard of the packaging to separate and support the parts removed from the boxes.
- How to use the Minifix Set (when used in the product).
- Apply glues to the wooden dowels (when used in the product).
Recommended tools
Hardware
Installation Instructions
FAQ’s
Do I need professional help to assemble this product?
Yes, this product must be assembled by a professional.
What tools are recommended for assembly?
The recommended tools for assembly are Tool 1, Tool 2, Tool 3, Tool 4, Tool 5, Tool 6, Tool 7, and Difusor Profile.
How should I prepare the room before assembly?
Make sure to clean the area and leave it in good condition. Use the cardboard from the packaging to separate and support the parts.
Can I use glue on the wooden dowels?
Yes, it is recommended to apply glue to the wooden dowels before inserting them into the corresponding holes.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>