Gelius REQUINTE 220 Painel Para TV Instruction Manual
- June 12, 2024
- Gelius
Table of Contents
Gelius REQUINTE 220 Painel Para TV
Product Information
- Product Name: REQUINTE 220
- Dimensions: 2505mm x 235mm x 2240mm
- Components: Panel, Wire pass panel, Shelf, Side ruler, Smaller ruler, Bigger ruler, Template
- Recommended Tools: Profile Diffuser, Glue
- Assembly Instructions: Manual de montagem | Manual de montaje | Assembly instructions
Product Usage Instructions
- Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work.
- Use the cardboard of the packaging to separate and support the parts removed from the boxes.
- Apply glue to the wooden dowels (when used in the product).
- Define the location and height at which the panel is to be installed and mark the position of the fixing holes on the wall. Make sure that the panel will be leveled.
- Pass the LED tape through the designated hole.
- Follow the provided diagrams and instructions to assemble the various components of the product.
Please note that this product must be assembled by a professional.
Parts
| Parts | Medida / Size | Qtd. | Vol. |
|---|---|---|---|
| Panel | 2500x448x15 | 04 | 01 |
| Wire pass panel | 2500x448x15 | 01 | 01 |
| Shelf | 1894x203x20 | 01 | 02 |
| Side ruler | 2470x40x20 | 02 | 01 |
| Smaler ruler | 350x60x20 | 06 | 02 |
| Bigger ruler | 798x60x20 | 12 | 02 |
| Templet | 890x40x20 | 01 | 01 |
Assembly instructions
Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Use the cardboard of the packaging to separate and support the parts removed from the boxes.
This product must be assembled by a professional.
How to use the Minifix Set (when used in the product).
Apply glues to the wooden dowels (when used in the product).
Recommended tools
Hardware
INSTRUCTION
ATTENTION! Before starting the installation, check all the conditions of the wall, notably regarding resistance and weight support and the existence and position of hydraulic, gas and eletrical lines, avoiding damage to these structures when running holes. Gelius Móveis not responsible for problems caused by inexperience, inadequancy or failure to follow due recommendations in the assembly and installation of their products by third parties.
Define the location and height at which the panel is to be installed and mark the position of the fixing holes on the wall.
ATTENTION! When marking the position of the holes in the wall, make sure that the panel will be leveled.
Remove the protective film from the double-sided tape and start gluing the Led tape on the channel of parte n°03.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>