Gelius REQUINTE 45 Refinement Panel Plate Instruction Manual
- October 30, 2023
- Gelius
Table of Contents
Gelius REQUINTE 45 Refinement Panel Plate
product information
Product Name: REQUINTE 45
Type: Panel
Size: 2505mm x 448mm x 35mm
Parts Included: Panel, Side ruler, Smaller ruler, Template
Recommended Tools: Glue, 8x A screws, 6x B screws, 6x C screws, 6x D screws, 2x E screws, 1x F screw
Product Usage Instructions
- Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Use the cardboard of the packaging to separate and support the parts removed from the boxes.
- Apply glue to the wooden dowels (when used in the product).
- Define the location and height at which the panel is to be installed and mark the position of the fixing holes on the wall. When marking the position of the holes in the wall, make sure that the panel will be leveled.
- Use the recommended tools to assemble the product, following the instructions in the manual.
- After assembly, clean the product with a soft cloth and check that all parts are securely fastened.
Note : This product must be assembled by a professional.
Product Dimensions
Product Parts
Nº| Cód.| Peças| Piezas| Parts| Medida / Size| Qtd.|
Vol.
---|---|---|---|---|---|---|---
01| 07652| Painel| Panel| Panel| 2500x448x15| 01| 01
02| 07653| Regua lateral| Regla lateral| Side ruler| 2470x40x20| 02| 01
03| 07654| Regua menor| Regla más menor| Smaler ruler| 350x60x20| 06| 01
04| 07655| Gabarito| Plantilla| Templet| 890x40x20| 01| 01
Recommendations
Attention
This product must be assembled by a professional.
Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Use the cardboard of the packaging to separate and support the parts removed from the boxes.
How to use the Minifix Set (when used in the product).
Apply glues to the wooden dowels (when used in the product).
Recommended tools
Hardware
Installation
ATTENTION! Before starting the installation, check all the conditions of the wall, notably regarding resistance and weight support and the existence and position of hydraulic, gas and eletrical lines, avoiding damage to these structures when running holes. Gelius Móveis not responsible for problems caused by inexperience, inadequancy or failure to follow due recommendations in the assembly and installation of their products by third parties.
Define the location and height at which the panel is to be installed and mark the position of the fixing holes on the wall. ATTENTION! When marking the position of the holes in the wall, make sure that the panel will be leveled.
With drilling machine and drill (not supplied with the product), make the holes in the wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>