Yong fang BT6085 Wireless Kids Headphones User Manual
- June 17, 2024
- Yong fang
Table of Contents
User Manual Wireless Kids Headphones
What’s in the Box?
Initial Setup
- Use the included micro USB charging cable to connect your headphones to a power source and charge your device for 2-2.5 hours.
- Once your headphones are fully charged, press and hold the POWER button for 2 seconds until the indicator light blinks red and blue. Your headphones are now in pairing mode.
- On your smartphone or tablet, search for the Wireless device named “BT-6085” and tap to connect. A blinking blue indicator light will confirm successful pairing.
Press & Hold to Power On
Button Functions
PREVIOUS/VOLUME
Press once to play the previous track.
Press hand hold for 2 seconds to decrease volume.
POWER
Press and hold for 2 seconds to turn on your device.
Press and hold for 4 seconds to turn on your device.
Press and hold for 5 seconds for Wireless pairing.
Press once to PLAY. Press again to PAUSE .
Press 2x for Siri / Google Assistant .
Press 3x for Study Mode / Music Mode.
NEXT/VOLUME+
Press once to play the next track.
Press and hold for 2 seconds to increase volume.
VOLUME SETTINGS
Toddler Mode(75dB max)
Kids Mode(85dB max)
Answering Phone Calls
PREVIOUS/VOLUME-
Press once to play the previous track.
POWER
Press once to answer a call. Press again to hang up.
Press and hold to reject a call.
NEXT/VOLUME+
Press once to play the next track.
Wireless Pairing
After initial Wireless pairing, your headphones will automatically connect to the previouslu paired device when turned on.
To pair your headphones to a new device:
- Disable Wireless on your previously connected device.
- Press and hold the POWER button on your headphone for 5 seconds to enter Wireless pairing mode. THe LED light on your headphones will blink red and blue, indicating that pairing mode is active.
- On the new device you wish to pair, search for the Wireless device named “BT-6085” and tap to connect.
Press & Hold for Wireless Pairing
A blinking blue light will confirm successful pairing.
Study Mode
The Specs
| Model: | BT-6085 |
|---|---|
| Wireless: | V5.3 |
| Driver Unit: | 30mm*2 |
| Impedance: | 32Ω |
| Sensitivity: | 75dB or 85dB |
| Rated Power: | 10Mw*2 |
| Charging Hole: | TYPE C |
| Charging Voltage: | DC 5V |
| Audio Plug: | φ3.5mm*2 |
| Battery: | Rechargeable Lithium-ion 3.7V, 300mAh |
| Working Time: | 24hours @ 50% Volume |
| Phone Talk Time: | 22hours |
| Charging Current: | 200mA |
| Power Charge: | 2-2.5hours |
| Microphone: | Built-in |
| Transmission Distance: | 32.8ft(10 meters) |
WARNING: Listening to loud audio for extended periods of time may damage your hearing permanently.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and;
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes expressly or modifications not approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>