TIMEGUARD WFTWSUSB WiFi 2 Gang Smart Wall Socket with USB port Instruction Manual

: June 7, 2024
: TIMEGUARD

Table of Contents

TIMEGUARD® WFTWSUSB WiFi 2 Gang Smart Wall Socket with USB port
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TIMEGUARD® WFTWSUSB WiFi 2 Gang Smart Wall Socket with USB port

Installation & Operating Instructions

TIMEGUARD® WFTWSUSB

1. General Information

These instructions should be read carefully in full before installation, and retained for further reference and maintenance.

2. Safety

Before installation or maintenance, ensure the mains supply to the smart switch is switched off and the circuit supply fuses are removed or the circuit breaker turned off.
It is recommended that a qualified electrician is consulted or used for the installation of this smart switch and installed in accordance with the current IEE wiring and Building Regulations.
Check that the total load on the circuit including when this smart switch is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.

3. Technical Specifications

230V AC 50 Hz
This unit is of class II construction
Switch Rating: 13A Single outlet Max
Manual ON/OFF Control: Independent control of both outlets.
USB Port Output: 5V 2.4A
Standby Power: ≤1W
Operating Temperature: -20°C to +60°C
Operating Humidity: ≤80%RH
WLAN-Standard: IEEE 802.11 b/g/n
CE Compliant
EC Directives: Conforms to latest directives
Dimensions (H x W x D): 90 x 146 x 30mm

4. System Requirements

Smartphone/Tablet with at least iOS 8.0 or Android 5.0
WLAN-enabled router: 2.4GHz (Separate Band)
Tuya Smart App

5. Connection Diagram

Connection Diagram

6. Downloading App and Registration

Note: the smartphone or tablet must be connected to a 2.4GHz band on the router. Paring on the 5GHz band will result in paring either timing out or being unsuccessful. Refer to your ISP (Internet Service Provider) on separating the bands if required.

Ensure your phone or tablet is connected to your local Wi-Fi network.
Download the Tuya Smart App onto your phone or tablet by searching for ‘Tuya Smart’ on Google Play Store or the App Store. You can also scan the applicable QR code below;

Download App

Download App Continued

Install the App and open it to the registration screen. Click on the ‘ Register ’ button.

Register Figure 1

Tap ‘ Agree ’ to accept the privacy policy.

Register Figure 2

Choose your region by selecting the Country Code. Enter your email address or phone number and click ‘ Get Verification Code ’.

Register Figure 3

Register Figure 4

Enter the Verification Code sent to the email address or phone number that you provided. Once you have successfully entered the code, it will automatically move you to the Password screen.

Register Figure 5

Assign a Password (this must be between 6 to 20 characters including letters and digits) and click ‘ Done ’.

Register Figure 6

You are now registered and by default will see the App home page.

Register Figure 7

7. Home Management

Note: Before adding any devices to your account, structuring your household (or the property) may be a consideration if you plan on using Smart devices in different rooms or locations.

Select the ‘ Me ’ option from the home page which will navigate you to your personal settings. From here you can setup a nickname for your profile i.e. ‘Mr Smith’s Account. After this select the ‘ Home Management ’ option.

Home Management Figure 1

Home Management Figure 2

Select the ‘ Home Name ’ option and enter your last name or even ‘ My Home ’ if preferred. (This is required to allocate devices to separate rooms later once paired).
Next tick the rooms you wish to assign to your account; this can be changed at any time and custom room names can also be added.

Home Management Figure 3

To navigate back to the home screen, press the ‘ Back ’ button, and then click Home.

8. Pairing your Device(s)

To add a new device to your account, click the ‘ Add Device ’ button (or click on the + button in the top right hand corner)

Pairing your Device Figure 1

Notice the different categories of products; it is essential that the correct product is selected for the pairing process to be successful. For the Wi-Fi 2 Gang Smart Wall Socket, choose the ‘ Socket (Wi-Fi) ’ option from the list.

Pairing your Device Figure 2

With power to the Wi-Fi 2 Gang Smart Wall Socket turned ON, press and hold one of the On/Off buttons for a few seconds until the LED starts to flash.
When the LED is flashing press the ‘ Confirm indicator rapidly blinking ’ button. Enter the password for the network and press the ‘Confirm’ button to pair the product to your account (In most cases the password should autofill).

Pairing your Device Figure 3

Pairing your Device Figure 4

The App will pair the smart product to the network. The time it takes for pairing to complete, which will differ depending on the network connection. Shortly into the pairing process, the flashing Status LED will become stable (ON). This indicates that the product has joined the network.

Pairing your Device Figure 5

If the following screen is displayed, then the product has been paired successfully. To rename your product, select the pencil icon. If this is not required, click on the ‘ Done ’ button and you will guided to the device controls menu.

Pairing your Device Figure 6

Pairing your Device Figure 7

To navigate back to the home screen, press the ‘ Back ’ button. The newly paired Wi-Fi Smart Switch will now be listed.

Pairing your Device Figure 8

Note: If the pairing process was not successful, disconnect the mains supply from the product and re-establish power to the unit. Follow the bullet points from ’Section 8‘ to try again.

9. Smart Home Assistant

To add your device to your Smart Home Assistant services, such as Google Home or Amazon Alexa, follow the on-board instructions located on the TuyaSmart App. To do this, select the ‘ Me ’ option from the home menu, and then select ‘ More Services ’.

Smart Home Assistant Figure 1

Smart Home Assistant Figure 2

On the more services screen, you will see support or different applications for automated Smart Home control. Follow the instructions on the TuyaSmart App to add the devices to your Smart Home Assistant service.

Note: The Smart Home Assistant services supported by the TuyaSmart App may change as it is a 3rd party App Service. Any services that may be removed are the responsibility of TuyaSmart developers and not Timeguard.

Smart Home Assistant Figure 3

10. Support

Note: If you have any concerns that the intended application of this product does not meet your requirements, please contact Timeguard directly prior to installation.

11. Guarantee & Company Details

3 Year Guarantee

In the unlikely event of this product becoming faulty due to defective material or manufacture, within 3 years of the date of purchase, please return it to your supplier in the first year with proof of purchase and it will be replaced free of charge. For years 2 to 3 or any difficulty in the first year, telephone our helpline.

Note: a proof of purchase is required in all cases. For all eligible replacements (where agreed by Timeguard) the customer is responsible for all shipping/postage charges outside of the UK. All shipping costs are to be paid in advance before a replacement is sent.

If you experience problems, do not immediately return the unit to the store. Telephone the Timeguard Customer Helpline:

HELPLINE

020 8450 0515

or email
helpline@timeguard.com

Qualified Customer Support Coordinators will be online to assist in resolving your query.