Dongguan Yong Fang Electronic Technology BT-6056 Wireless Headphone User Manual

June 6, 2024
Dongguan Yong Fang Electronic Technology

Dongguan
Yong Fang Electronic Technology BT-6056
Wireless Headphone
User Manual

Please read the instructions before using the headset.

THE OBJECTS IN THE BOX

  1. WIRELESS Headphone
  2. USB Charging Cable

WIRELESS HEADPHONE:

1. Next/Volume up 5. Charging
2. On/Off 6.Aux-in
3. Previous/Volume down 7. Mic
4. Indicator Light

BUTTON ICON:

  1. Power Switch:
    Long press to turn on / off
    Short press to play/pause when music playing or answer/reject the phone call

  2. WIRELESS Music mode:
    **** Short press + to play the next song.| Long press + to volume up.
    ---|---
    Short press – to play the previous song.| Long press – volume down.

  3. MOBILE PHONE CONNECTION:
    Step 1:
    Open the Bluetooth setting on your phone or tablet and click “search device”. iPhones will search for Bluetooth devices automatically
    Step 2: You have found the product when the screen displays the character “wireless headphone”, Click on it on your device to pair the connection.
    Step 3: The phone or tablet will indicate when the pairing is successful. The character on the display of the product will stop flickering.

  4. CHARGING:
    Please make sure the product is fully charged for the first use. Charge the product with the provided USB cable which is compatible with any computer or other 5V output charger. The charge Bluetooth Indicator will be in red while charging, then when the battery is fully charged it will turn off.

  5. Product Specifications:

Support A2DP,AVRCP,HSP,and HFP profile Headset Spec:

  1. Driver Unit: 40mm;
  2. Impedance:16 ohms;
  3. Sensitivity: 103dB +/- 3dB;
  4. Max. Input Power: 20mW;
  5. Frequecny Response: 20Hz-20kHz;

Features:

  1. Working distance: 10 M
  2. Built-in rechargeable Battery: 3.7V,200mAh
  3. Playing time: up to 8 hours
  4. Phone talk: up to 8 hours
  5. Charging Time: 2.0~2.5hours
  6. Standby time: up to 15days

TIPS:

  1. Charging time: about 2 hours.
  2. When using for the first time, charging for more than 1-2 hours is good for the battery.
  3. Please charge the product if the product hasn’t been used for a long time (more than one month)
  4. Please keep away from fire and water.
  5. To prevent possible hearing damage, do not listen at high volume levels for long periods. Don does not use the headset while driving or cycling or in a situation where you should be able to hear other sounds. As a guide to setting the volume level, check that you can still hear your own voice when speaking normally while listening with the headset.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and;(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes expressly or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals