nVent HOFFMAN IWS242424DE1LG Industrial Workstation Instruction Manual
- June 12, 2024
- nVent HOFFMAN
Table of Contents
HOFFMAN IWS242424DE1LG Industrial Workstation
Product Information
Industrial Workstation
- Product Number: P/N 89175039, 89175040
The Industrial Workstation is a versatile workstation designed for use in industrial environments. It features advanced functionality and is capable of handling various tasks efficiently.
Product Usage Instructions
Connecting the Workstation
To begin using the Industrial Workstation, follow these steps:
- Ensure that the power supply is disconnected.
- Connect the necessary cables to the appropriate ports on the workstation.
- Connect the power supply to the workstation and plug it into a power outlet.
- Switch on the power supply and wait for the workstation to boot up.
Operating the Workstation
Once the workstation is connected and powered on, you can perform various
tasks using the following instructions:
- Refer to the user manual for specific instructions on navigating the workstation’s interface.
- Use the provided keyboard and mouse to interact with the workstation.
- Access the different features and applications by selecting them from the menu or desktop icons.
- Follow any additional instructions provided in the user manual for specific tasks or operations.
Maintenance and Safety
It is important to maintain and operate the Industrial Workstation safely.
Follow these guidelines:
- Regularly clean the workstation using a soft cloth and mild cleaning solution.
- Avoid exposing the workstation to excessive heat, moisture, or dust.
- Ensure proper ventilation around the workstation to prevent overheating.
- Do not attempt to disassemble or repair the workstation yourself. Contact a qualified technician for any maintenance or repair needs.
- Always follow the safety precautions and guidelines provided in the user manual to prevent accidents or damage.
For more detailed information on using the Industrial Workstation, please refer to the complete user manual.
Mounting Instruction
The monitor arm mounting screws are preinstalled in the column mounting holes:
- Remove the top screw
- Loosen the bottom screw
- Hang the monitor arm on the bottom screw
- Install the top screw and tighten both screws
- Attach bracket to monitor with two top thumb screws provided with the monitor arm, do not tighten completely
- Lower the monitor over the monitor mount plate so the bracket is on the back of the mounting plate
Install the two bottom thumb screws and tighten all thumb screws
- Insert tabs of the cover into the slots of the shield then pivot the cover down so the dimples of the cover engage the slots on the sides of the shield.
- Adjust the Pivot Bolt friction to counter the weight of the monitor and shield for display tilting.
Approximate keyboard heights when alternate mounting positions are used.
© 2019 Hoffman Enclosures Inc.
PH 763 422 2211 • nVent.com/HOFFMAN.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>