ClearView CV1001 Window Film

Product Information

Specifications

• Product: Window Film
• Suitable for : Indoor, flat, smooth, and clean glass
• Size : Customizable based on window dimensions
• Usage : Interior surfaces of windows, glass doors, office partitions, bathroom glass

Product Usage Instructions

1. Clean Your Window: Thoroughly clean the window surface before application.
2. Measure Window Size: Measure the width and length of your window.
3. Cut Film: Cut the film into a size approximately 1 inch larger than the window.
4. Spray Water: Wet the window completely by spraying water on it.
5. Peel Off Backing: Gently peel off the backing clear protective film.
6. Position Film: Position the film against the window and press across the entire top to allow it to grip slightly.
7. Smooth Out: Use a squeegee to smooth out the film, ensuring there are no air bubbles. Dry off excess water with a towel.
8. Apply to Suitable Surfaces: The window film is suitable for indoor, flat, smooth, and clean glass surfaces.
9. Remove Backing and Apply: Remove the transparent backing and place the smooth side of the film against the window.

FAQ

• Q: Can this window film be used on textured glass surfaces?
  • A : No, the window film is only suitable for flat, smooth, and clean glass surfaces. Avoid using it on textured glass as it may not adhere properly.
• Q: Is it possible to reposition the film once it has been applied?
  • A : It is recommended to position the film carefully during application as repositioning may cause damage to the film or resulting air bubbles. Take your time during the initial application for the best results.

Installation Steps

1. Clean your window thoroughly. Measure the size of your window both width & length.
2. Cut film into proper size, approximately 1 inch larger than the window.
3. Spray water, wet the window completely.
4. Peel off the backing clear protective film gently.
5. Position the film against the window and use your finger to press across the entire top of the film to allow it to slightly grip.
6. Smooth out the film with the squeegee, ensuring there are no air bubbles. Dry off the window with the towel.

Installation Tips

• The window film is only suitable for indoor, flat, smooth and clean glass. For example, the interior surfaces of windows and glass doors, glass office partitions, and bathroom glass.
• Remove the transparent backing, and place the smooth side of the film to the window.
• Spraying a lot of soapy water is the key point, the more water the better.
• It is recommended that installation be completed by at least 2 people

Recommended Tools : (not provided with product)

• Squeegee,
• Measuring Tape,
• Stainless Steel Ruler.
• Scissors (Razor Knife),
• Scraper (Credit Card),
• Spray Bottle,
• Lint Free Towel.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>